Latest water supply fittings Tenders | Government water supply fittings Tenders

State Government

CTN :43149632

18 Dec, 2025 4.90 Lacs

Kaman - Rajasthan

Tender For fabbrication work (cutting, welding , threading and turning of various size joints and pipe) under sub.div. kaman and section jurhera

State Government

CTN :43149651

18 Dec, 2025 4.90 Lacs

Bharatpur - Rajasthan

Tender For fabbrication work (cutting, welding , threading and turning of various size joints and pipe) under sub.div. pahari.

State Government

CTN :43165661

23 Dec, 2025 1.50 Lacs

Hanumangarh - Rajasthan

Tender For supply of cid joints for pvc pipe for division hanumangarh

State Government

CTN :43165665

23 Dec, 2025 1.50 Lacs

Hanumangarh - Rajasthan

Tender For supply of cid joints for hdpe pipe (long coller) for division hanumangarh

State Government

CTN :43145347

17 Dec, 2025 9.51 Lacs

Delhi - Delhi

Tender For providing and installing open gym equipments with buy back of old gym equipments at district park at dilshad garden (link chain) (specialized work). - schedule -a , air walker: providing, designing and fixing of air-walker of size 1100x550x 1480 mm fabricated with main post of 114 mm dia and 2.5 mm thick and other pipes of 40 mm dia 2.5 mm thic made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pie to be closed with gi /lldpe caps, base plate cover shall be made of virgin lldpe plastic by rotational molding with minimum 8 mm thickness, uv resistant and colour as approved by engineer-in-charge. high quality grip rubber should be sued on handles. foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and pedal and fixing of equipment etc. ., sit up station: providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40 mm dia and 2.5 thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8 mm, colorful and uv resistant and environmental friendly. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal seat and base pedal and fixing of equipments etc. ., air swing: providing, designing and fixing of air swing in pair of size 1150x900x1250 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 8 mm, colorful and uv resistant and environment friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrets is set, f

State Government

CTN :43145348

17 Dec, 2025 27.18 Lacs

Delhi - Delhi

Tender For providing and installing open gym equipments with buy back of old gym equipments in all the 6 parks as mentioned in the schedule.(specialized work). - schedule -a , air walker: providing, designing and fixing of air-walker of size 1100x550x 1480 mm fabricated with main post of 114 mm dia and 2.5 mm thick and other pipes of 40 mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pie to be closed with gi /lldpe caps, base plate cover shall be made of virgin lldpe plastic by rotational molding with minimum 8 mm thickness, uv resistant and colour as approved by engineer-in-charge. high quality grip rubber should be sued on handles. foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and pedal and fixing of equipment etc. (demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately)., sit up station: providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40 mm dia and 2.5 thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8 mm, colorful and uv resistant and environmental friendly. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal seat and base pedal and fixing of equipments etc. (demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately)., air swing: providing, designing and fixing of air swing in pair of size 1150x900x1250 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 8 mm, colorful and uv resistant and environment friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to

State Government

CTN :43142698

12 Dec, 2025 2.00 Lacs

Ajmer - Rajasthan

Tender For supply of non-centerlized item (cid joints for hdpe pipe, ball bearing and rubber sheet) in phed division beawar

State Government

CTN :43156050

15 Dec, 2025 34.46 Lacs

Barmer - Rajasthan

Tender For 1. roof repair and waterproofing work2 toilet renovation and water supply fittings3 boundary wall elevation

CTN :43149687

23 Dec, 2025 14.99 Lacs

Barmer - Rajasthan

Tender For toilet renovation and water supply fittings

CTN :43151314

19 Dec, 2025 37.58 Lacs

Kolkata - West Bengal

Tender For a/r & m/o residential quarters of customs and central excise at shantipally, e.m. bye pass, kasba, kolkata during 2025-2026. sh: repair and renovation of newly allotted quarters including replacement of damaged windows, doors, sanitary & water supply fittings and other miscellaneous works etc.

Water Supply Fittings Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors