Latest water supply material Tenders | Government water supply material Tenders

State Government

CTN :43117011

17 Dec, 2025 NA

Delhi - Delhi

Tender For augmentation of water supply by improvement of e/m equipments of various tube wells at neel giri apartment area under greater kailash constituency ac-50. - s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable.djb sor 2024-25 item code 45.1.93 make: - tata/jindal, s/o pvc insulated pvc sheathed flat cable with plain copper conductor having 3 cores for submersible motor of 4 sq mm size (each roll of 100 mtrs.) make: - grandlay/havells/gloster/djb approved, providing & fixing of indicating lamps ryb along with complete wiring of above electrical equipment and with suitable size copper conductor wire ( 6 sq mm,4 sq mm,2,5 sq mm & 1.5 sq mm) and suitable size ferrule /socket of required size insulating board i/c replacement of old and damaged component s with above mentioned material .job i/c testing & commissioning of complete panel board on load as per site requirement., providing and fixing of motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection, time delay power on programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa up to 10hp. make: gain guard/skope., s/o ms nut bolts off size as per requirement., s/o rubber packing 50 mm dia. flange., lowering & lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t & p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material will be arranged by the firm as per site requirement. beyond the depth of 250 feet.

State Government

CTN :43117043

17 Dec, 2025 NA

Delhi - Delhi

Tender For enhancing of water supply by improvement of e/m equipments of various tube wells in jawahar park area under ambedkar nagar constituency ac-48. - supply of fully automatic oil immersed star delta starter upto 15 hp , 3 phase 415 volts, 50 hz ac. make:- bentex/bch/djb approved., supply of mccb 63 amp, 4 pole, breaking capacity at 415 v: 35-36 ka, adjustable thermal setting (70- 100%) and fixed magnetic settings. make: - l&t/c&s/djb approved., providing & fixing of indicating lamps ryb along with complete wiring of above electrical components and with suitable size copper conductor wire (6sq mm, 4 sqmm , 2.5 sq mm & 1.5 sq mm) and suitable size ferrule/socket of required size insulating board i/c replacement of old and damaged components with above mentioned materials. job i/c testing & commissioning of complete panel board on load as per site requirement., s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable. djb sor 2021-22 item code -45.1.93 make: - tata/jindal, s/o pvc insulated pvc sheathed flat cable with plain copper conductor having 3 cores for submersible motor of 4 sq mm size (each roll of 100 mtrs.) make: - grandlay/havells/gloster/djb approved, s/o ms nut bolts off size as per requirement., s/o rubber packing 50 mm dia. flange., lowering & lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material will be arranged by the firm as per site requirement. the other material required during execution will be provided by department.

State Government

CTN :43117050

17 Dec, 2025 NA

Delhi - Delhi

Tender For augmentation of water supply by improvement of e/m equipments of various tube wells in dda flats madangir under ambedkar nagar constituency ac-48. - s/o motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection, time delay power on programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa up to 10 hp. make: gain guard/skope/any reputed make., supply of mccb 63 amp, 4 pole, breaking capacity at 415 v: 35-36 ka, adjustable thermal setting (70- 100%) and fixed magnetic settings. make: - l&t/c&s/djb approved., providing & fixing of indicating lamps ryb along with complete wiring of above electrical components and with suitable size copper conductor wire (6sq mm, 4 sqmm , 2.5 sq mm & 1.5 sq mm) and suitable size ferrule/socket of required size insulating board i/c replacement of old and damaged components with above mentioned materials. job i/c testing & commissioning of complete panel board on load as per site requirement., s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable. djb sor 2021-22 item code -45.1.93 make: - tata/jindal, s/o pvc insulated pvc sheathed flat cable with plain copper conductor having 3 cores for submersible motor of 4 sq mm size (each roll of 100 mtrs.) make: - grandlay/havells/gloster/djb approved, s/o ms nut bolts off size as per requirement., s/o rubber packing 50 mm dia. flange., lowering & lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includeshiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material will be arranged by the firm as per site requirement. the other material required during execution will be provided by department. djb sor(e&m)-2022 item code 27.1.2

State Government

CTN :43122461

29 Dec, 2025 NA

Khorda - Odisha

Tender For supply, installation, testing, commissioning of water content test kit for transformer oil testing with all accessories (3no) - enter rate of single item in column 13 (including gst), supply, installation, testing, commissioning of water content test kit with accessories

corporations/Associations/Others

CTN :43127065

15 Dec, 2025 20.56 Lacs

Hyderabad - Telangana

Tender For supply and installation of super loo star deluxe portable mobile toilets and vvip mobile toilets in rp nilayam of bollarum including water supply to the toilets through water tankers on the occasion of sojurn visit of honble president of india to hyderabad from dt.16.12.2025 to 21.12.2025, alwal circle ,ghmc (item no.1)

Central Government/Public Sector

CTN :43125777

31 Dec, 2025 NA

Yelahanka - Karnataka

Tender For supply of qiamp viral rna mini kit 250rxs,nuclease free water 10 50ml,tungsten carbide beads 3mm 200,item 1,item 2

State Government

CTN :43110072

26 Dec, 2025 10.00 Lacs

Jabalpur - Madhya Pradesh

Tender For supply of hardware/ sanitary material and building materials, various units at ndvsu, adhartal, jablpur (3rd call) - supply of hardware/sanitory building material all item should be isi mark enclosed list, pvc pillar cock , pvc engle cock , brass short body bib tap faucet with wall flange water tap for bathroom, kitchen, wash basin, hot & cold water compatible, chrome finish( ) short body, tri water tap for bathroom | hold and cold mixer faucet | wash basin tap with water saving hidden aerator | strong brass construction, brasspillar cock , brass engle cock , stainless steel long body taps for bathroom and kitchen taps with chrome finish and quarter turn fitting ( ) long body, pvc long body bib tap with wall flange hot & cold water faucet for kitchen sink, bathroom & wash basin | durable, rust- free plastic tap for indoor use ( ) long body, pvc short body bib tap with wall flange hot & cold water faucet for kitchen sink, bathroom & wash basin | durable, rust-free plastic tap for indoor use ( ) short body, wash basin pipe (heavy ), connection pipe ( 1 feet ), connection pipe ( 2 feet ), upvc socket - , upvc t bend - , upvc brass l bow - , upvc brass socket - , upvc brass t bend - , upvc l bow - 1 , upvc socket - 1 , upvc t bend 1 , upvc brass l bow - 1 , upvc plan l bow - , upvc brass l bow - 1 , upvc 1 y reducer, upvc brass socket - 1 , upvc plan l bow - 1 inch, upvc brass t bend 1 , upvc brass l bow - 2 , upvc brass socket - 2 , cpvc brass l bow - , cpvc brass socket - , cpvc l bow - 1 , cpvc brass l bow - 1 , cpvc brass socket - 1 , cpvc brass t bend 1 , cpvc brass l bow - 2 , cpvc brass socket - 2 , cpvc brass t bend 2 , g.i. nozzle - 1 , g.i. nipple - 1 , g.i. stopper - 1 , g.i. - t - , g.i. l bow - , g.i. nipple - , g.i. socket - , tapelone, solvent upvc 100gms. box, gate valve brass - , section clamp 3 , section clamp 2 , upvc pipe 1 , upvc pipe1inch, upvc pipe1.5inch, upvc pipe 2 , taparia 500 gms ball pein hammer with handle, pipe pana - 300mm, pipe pana - 600mm, pach pana - 300mm, pechcus - screw driver ( four head ), brass f.t. upvc , brass f.t. upvc 1 , brass m.t. upvc , brass m.t. upvc 1 , cement, brick fly ash 50kg/cm2, bricks open bhatta 25kg/cm2, steel nails - 2 , steel nails - 3 , nittle screws - , nittle screws - 1 , nittle screws 1 , nittle screws , nittle screws 2 , emulsion interior -, painting brush - 2 , painting brush - 3 , painting brush - 4 , painting brush - 6 , putty jk / birla, putty jk / birla, steel fly proof mesh, teak wood beat - , teak wood beat - 1 , teak wood beat - 1 , teak wood beat - 1 , teak wood beat - 2 , ply water proof - 8mm, ply water proof - 10mm, ply water proof - 12mm, ply water proof - 18mm, steel hinges butt - x 3 , steel hinges butt - 1 x 4 , tower bolt steel - 6 , tower bolt steel - 10 , godrej door lock medium size, almira lock, upvc l bow - , cpvc l bow - , cpvc socket - , cpvc t bend - , cpvc socket - 1 , cpvc t bend 1 , g.i. hose collar, floor jali - steel 4 , hexa blade, hammer bit - 6mm, upvc pipe , upvc pipe 1 , cpvc pipe , cpvc pipe 1 , cpvc pipe 1 , cpvc pipe 2 , patti pana - ( nub. 5 to 16 nub. ), ring pana - ( nub. 5 to 16 nub. ), steel nails - 1 , emulsion exterior -, marble - powder, lime - un ., l drop steel - 10 , l drop steel - 12 , tower bolt steel - 8 , steal paint, primer iron, primer wooden, sistan set, health fuset 1 meter, jet spray 1 meter, brass plier cook, brass pliers cook high neck, concealed wall brass inch, universal tool kit with bag/box complete set (plumber), bubble level, metric adjustable tap die inch, tap die inch, tap die 1 inch, tap die 1.5 inch, tap die 2 inch, tap die 2.5 inch, tap die 3 inch, hdpe roll pipe isi 1 inch, hdpe roll pipe isi 1.5 inch, hdpe roll pipe isi 2 inch, hdpe roll pipe isi 2.5 inch, hdpe roll pipe isi 3 inch, hdpe roll pipe isi 4 inch, pcn tell 2 y 2.5 inch, spn 2 inch, horse collar 1inch, horse collar 1.5inch, horse collar 2inch, horse collar 2.5inch, horse collar 3 inch, horse collar 4inch, g.i.

CTN :42842817

29 Dec, 2025 16.90 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of spare/accessories items of two nos. multi-purpose fire tender(rj-28ea-0956 and rj-28- ea-0957)against tn-sc-638/2025-26(mm) - high pressure hose reel with 60mm lg x 19 mm ( ) with fog gun and spray type, low pressure hose reel with 19 mm x 50 mm long hose with duel purpose shut off nozzle., extension ladder 10.5 meter, delivery hose 63 mm rubber lined in 30 m length (type b of is 636/79/5) complete with instantaneous coupling., long line 50 mm circumference 30 m long as per is 1084., short line 50 mm circumference 15m length as per is 1084., protective clothing for fireman complete with golves, boots, helmets with suitable face shield mad out of material capable of reflecting at least 95% of radiant heat temperature around 1500 to 2000 degree celsius and also afford some protective against direct flame. the suit will be of sufficient size to accommodate a breathing apparatus to users (item should be packed in hard body box)., fire hook, fire man axe, sledge hammer, carpenter saw, pick axe, celling hook, crow bar made of carbon steel, self contained breathing apparatus (45 min duration compressed air type) complete with spare cylinder & tool kit), dividing breeching, collecting breeching, pvc suction hose heavy duty complete with copper alloy round threaded couplings to suit the pump inlet - 2.5m long., suction strainer for item 2, basket strainer suitable for item 4 , is : 3582, dividing breaching with control arrangement as per is : 5131, collecting breaching as is : 905, hose bandages rubberized is : 5612, hose clamps is : 5612, water curtain nozzle made of m .s .plate with g . m instantaneous connection, branch pipe short ( chromium plated) is : 903, a set nozzle of sizes 12 mm , 16 mm , 20mm , 25 mm and 32 mm ( two each ) ( see is : 903 - 1975 * t ), adapter for 100mm suction female thread and 63mm male instantaneous, adaptor double female instantaneous pattern 63mm ., adaptor double male instantaneous pattern 63mm, hand lamp ( 4cells ), rubber gloves 33kv 1 pair, fire beater, foam pick up tube, rubber gloves as per is 4770 - 1991 for 5000 volts, leather gloves is 6994 1977, jack hydraulic for 20 ton capacity with handle, hand controlled branch for 63 mm size hose coupling, hand held fast action select flow nozzle :-the selectable flow rate multipurpose nozzle should have a multiple flow setting. this product be of light in weight and easy to handle. weight of the nozzle should not be more than 2 kg. the calibrated flow rates are easily selectable through an selection ring. the stream patterns should be changed by rotating the diffuser head ring. nozzle should be having pistol grip, shut off ball valve opening and made of aluminum alloy., bolt cutter 600mm long, shovel with handle, minimum 12v halogen fog & spot lamps, hose ramp

CTN :43116353

30 Dec, 2025 NA

Ernakulam - Kerala

Tender For supply of magnetic level indicator and water level indicator -supply including freight of mr item no. 1. 0001 of group a , supply including freight of mr item no. 1. 0002 of group a , supply including freight of mr item no. 1. 0003 of group a , supply including freight of mr item no. 1. 0004 of group a , mandatory spares for item nos. 1. 0001 to 1. 0004 of group a

Corporations And Associations And Others

CTN :42419398

19 Dec, 2025 22.50 Lacs

Panchkula - Haryana

Tender For corrigendum : tender for the supply, installation and commissioning of refrigerated (cryoprecipitate) water bath on 2 years rate contract as mentioned against item in schedule of requirement.

Water Supply Material Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors