Latest water supply service Tenders | Government water supply service Tenders

Central Government/Public Sector

CTN :43099912

29 Dec, 2025 47.40 Lacs

Vellore - Tamil Nadu

Tender For corrigendum : addition and alteration to defence civilian married accommodation p169 at poigaipakkam and provision of overhead filling facility for dftcft at static water tank near aedald and parking shed for inas 561 and specialist power supply for processing mag

CTN :43185676

05 Jan, 2026 NA

Jind - Haryana

Tender For purchase of various apparatus/instruments required for department of chemistry, chaudhary ranbir singh university, jind - stirrer- the stirrer should be made up of ceramic coated aluminium alloy top with digital speed and temperature control. the stirring speed should be 50-1500 rpm or better. the stirrer should be operational up to a temperature range of 300oc with an accuracy of 1.0oc and ip 42 protection class. the input power should be 600 w or above. the stirrer should be supplied with hemispheric bowl (100 ml= 1 no; 250 ml= 1 no) to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks.warranty must be one year., electronic balance- the electronic balance should have a maximum weighing capacity of 200 g or more with a resolution and repeatability of 0.1 mg, and a response time of 5 sec or better. the system should have automatic internal calibration with touch screen display. the system should have internal database capacity of 2500 or more with multiuser password protection feature. warranty must be one year., vaccum pump - the pump should be operational at a maximum power of 65 w or more with a max. vaccum of 99 mbar or more. the pump should be fitted withvacuum and filter cartridge., hot air oven- the inner chamber should be made of stainlesssteel and the outer chamber should be m.s powdercoated. the maximum capacity of the oven shouldbe 100 ml or more. the operational temperatureshould be between ambient to 250oc or more witha temperature accuracy of 1o c. pid based digitaltemperature control., double distillation unit- the unit should be pyrogen free with a distillation water output capacity of 1.5 l/h. the minimum cooling water requirement should be 1lt/min. auto-power cut facility in case of halted supply of water., circulating oil bath- the oil bath should be made up of stainless steel with 4 digit 7 segment led display for temperature and time. the bath should have s.s perforated tray for holding flasks. the bath should have a capacity to accommodate flask of 1l. the working temperature range should be +5 to 240oc (0.1oc increment) with a temperature stability of 1oc, water bath- the water bath should have a capacity of 20 l within built water level sensor. the bath should be made up of stainless steel and supplied with 8 concentric rings. the bath should have digital temperature control with pt100 sensor. the system should have stirring capability with ptfe magnetic bars., ph/ condutivity meter - operational between a ph range of -2 to 16.00 with a resolution of 0.01 ph and an accuracy of 0.02 ph. 5 points calibration. the ec range shouldbe in between 0.00 to 29.99 s/cm, uv cabinet- operational at two uv wavelengths (254 and 365 nm). the cabinet should also be equipped with one visible light. the external body should be coated with ms powder/epoxy., flame photometer- application: the flame photometer is used for qualitative and quantitative determination of several cations, especially for metals that are easily excited to higher energy levels at flametemperature. these metals include na+, k+, ca2+, ba2+ and li2+.specification requirementmeasuring range na+: 0 to 99.9 ppm k+:0 to 99.9 ppm ca 2+ :0-99.9 ppmli 2+: 0 to 99.99 ppmsensitivity na+= 0.1 ppmk+ = 0.1 ppmspecificity less than 0.5% interference when concentrations are equal to test sample concentrationsgas control-adjustable with knobsignition system-auto ignition systemflame failure-auto detectiongas cut off-automaticreproducibility-less than 1% coefficient of variation for 20 consecutive samplesusing 10 ppm na set as maximum standardlinearity-less than 1%display led, 12.5 mm (1/2")fuel supply-high-grade propane/butane mixture regulated at approximately30 psiair supply-6 l/min at 12 psi; oil and moisture freerecorder-output 0.05 to 5 v (switchable)operating manuals, service manuals, other manuals should provide user, technical and maintenance manuals in english language list of equipment and procedures required

CTN :43220390

24 Dec, 2025 20.00 Lacs

Rupnagar - Punjab

Tender For renovation of research lab no.1 (room no 217) at 1st floor of department of chemistry in p.u. campus, sec-14, chandigarh - supply of furniture/fixture fittings, island laboratory table for overall dimension 4800mm(l)x1500mm(w)x900mm(h)modular table shall consist of 3 nos storage cabinet of 750mm(l) on each side of one drawer & below it twin swing door, 2nosstorage of cabinet of 600mm(l)having a swing door, 2 nos sink unit pp sink with a 2-way goose neck tap, storage cabinets of thelab table shall be provided with locking facility. the body of storage of cabinet should bemade of 0.8mm thick crca ms sheet having double side wall and door should be 16mm to 18mm thick with square edges madeof 1mm thick crca ms sheet. the swing door should be affixed with zero crank hydraulic steel hinges and drawers move on ballslide tetescopic channels. handles of the shutter should be pvc recessed. each storage cabinet sink module should be providedwith base frame made from30x30x1.2mm crca square pipe having nylon adjusters. 3nos reagant rack of 1200mm length shallbe moduler design consisting of bottom frame made of 30x30x1.2 crca square pipe and horizontal 2 stage storage of shelevesof 300mm d and reagant rack heghit shall be 650mm.electrical fitting: 2nos. socket of 5&15 amp should be provided beow the bottom shelf or regent rack. top of the table shall begranite of 18mm thickness supported with 12mm thick ply underneath, sharp corner edges of the granite should be roundedoff. drainage pipes and water line provision will be laid down by client., wall side laboratory table for overall dimension 4200mm(l)x750mm(w)x900mm(h)modular table shall consist of 3 nos storage cabinet of 750mm(l) of one drawer & below it twin swing door, storage cabinets ofthe lab table shall be provided with locking facility. the body of storage of cabinet should bemade of 0.8mm thick crca ms sheet having double side wall and door should be 16mm to 18mm thick with square edges madeof 1mm thick crca ms sheet. the swing door should be affixed with zero crank hydraulic steel hinges and drawers move on ballslide tetescopic channels. handles of the shutter should be pvc recessed. each storage cabinet sink module should be providedwith base frame made from30x30x1.2mm crca square pipe having nylon adjusters. 3nos reagant rack of 1200mm length shallbe moduler design consisting of bottom frame made of 30x30x1.2 crca square pipe and horizontal 2 stage storage of shelevesof 300mm d and reagant rack heghit shall be 650mm.electrical fitting: 2nos. socket of 5&15 amp should be provided beow the bottom shelf or regent rack. top of the table shall begranite of 18mm thickness supported with 12mm thick ply underneath, sharp corner edges of the granite should be roundedoff. drainage pipes and water line provision will be laid down by client., wall side laboratory table for overall dimension 6600mm(l)x750mm(w)x900mm(h)modular table shall consist of 6 nos storage cabinet of 750mm(l) twin swing door, 2nos storage of cabinet of 600mm(l)having aswing door, 2 nos sink unit pp sink with a 2-way goose neck tap, storage cabinets of the lab table shall be provided with lockingfacility. the body of storage of cabinet should be made of 0.8mm thick crca ms sheet havingdouble side wall and door should be 16mm to 18mm thick with square edges made of 1mm thick crca ms sheet. the swingdoor should be affixed with zero crank hydraulic steel hinges and drawers move on ball slide tetescopic channels. handles of theshutter should be pvc recessed. each storage cabinet sink module should be provided with base frame madefrom30x30x1.2mm crca square pipe having nylon adjusters. the thickness of granite shall be 18mm if required at site., wall side laboratory table for overall dimension 2400mm(l)x750mm(w)x900mm(h)modular table shall consist of 2 nos storage cabinet of 750mm(l) of one drawer & below it twin swing door, storage cabinets ofthe lab table shall be provided with locking facility. or equi

CTN :43165046

02 Jan, 2026 1.13 Crore

Dhubri - Assam

Tender For supply and construction of drinking water facility with r.c.c. shed at the following locations of chapar muncipal board under 15th fc tied grant for the year 2024-25 (1st installment) during the year 2025-26, 2023-24 (2nd instalment) during the year 2024-25 and 2023-2024 (1st installment) for the year 2024-2025. (1) chapar daily martket, ward no.5 (2) chapar h.s. school, ward no.5 (3) chapar rowmari h.s. school, ward no.7 (4) arearjhar high school, ward no.1 (5) chapar girls high school, ward no.4 (6) sankardev shishu vidya niketan, bhakatgaon, chapar, ward no.10

CTN :43239260

29 Dec, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of material for dgqa technical evaluation facility - mud (garden soil of grain size 300 μ, digital weighing machine (range 0-20 kg), stop watch, magnifying glass (10 x magnification), hand gloves, marker pen, full ppe kit with head & face cover, plastic bucket (20 litre capacity), plastic mug, small plastic container (200 gm), stirrer (wooded handle / rod), wooden frame for hard mud surface, safety goggles, wire/ string for water immersion test, measuring tape steel (200 cms), flannelate cloth

corporations/Associations/Others

CTN :43263601

13 Jan, 2026 2.83 Lacs

Kolkata - West Bengal

Tender For mending of water supply service pipeline by repairing of leaks and other ancillary works at comint park, s.s. colony and srinagar main road surrounding in ward no-109 br-xii.

corporations/Associations/Others

CTN :43263860

13 Jan, 2026 2.83 Lacs

Kolkata - West Bengal

Tender For restoration of water supply service pipeline by repairing of leaks and other ancillary works at sardar park, a10, a34 purbadiganta and aguan sangha surrounding in ward-109 br-xii.

Central Government / Public Sector

CTN :43224232

31 Dec, 2025 NA

Mumbai - Maharashtra

Tender For supply, fabrication, transportation and installation of rvi works (canopy/building fascia with swagat/aod/ logo/lettering, air tower, ev charger/water canopy, facility/directional signages, display board, bay signage, monolith/unipole etc.) of type-a

State Government

CTN :43263071

13 Jan, 2026 2.20 Lacs

Bardhaman - West Bengal

Tender For new source of drinking water icds no sixty five and two hundred three water supply facility sansad five activity code 109760452

CTN :42480293

29 Dec, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply operation comprehensive maintenance of various capacities vehicle mounted high capacity suction and jetting machines with filtration recycling and dewatering facility for cleaning storm water drains at mumbai city eastern suburbs and western

Water Supply Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government / Public Sector

State Government