Latest water tap scrap Tenders | Government water tap scrap Tenders

State Government

CTN :43754834

05 Feb, 2026 14.10 Lacs

Delhi - Delhi

Tender For supplying installation testing and commissioning of laundry equipment in ashadeep narela delhi - supplying installation testing and commissioning of laundry equipment in ashadeep narela delhi - sitc of front loading washing machine with loading capacity of 30 kg dry weight per charge heavy duty , electrically heater inner basket & outer drum stainless steel, micro countroller base cyclic timer for auto- reserve, auto- timer & auto digital temperature control, water- inlet valve drain valve complete with control panel, & electric motor for wash, driver through pulleys & v- belts and control panel operator on 3ph, 415 v, 50 hz, a.c. supply operation cycle 30 to 40 mintutes complete connection etc as required, sitc of hydro extractor machine direct- driver self- balance with automatic electromangnetic dc injection brake system having capaciy of 30 kg per charge with auto -timed top loading vibration less innner basket and outer drum stainless steel complete with specially designed electric motor and control panel operator on 415 v,3 phase , 50 hz ac supply . operation cycle 5 to 10 mintes complete connection etc as required., sitc of drying tumbler machine front loading open pocket, electrically heater with loading capacity of 30 kg . per charge complete with micro controller base cyclic timer for auto timed & auto - reserver, auto digital temperature control, fitted with control panel , one motor each for driver and blower double walled glass wool insulated outer body mild steel with inner basket stainless steel, self lint screen , v belt driver waster air exhaust etc operates on 415 v, phase 50 hz ac supply . operation cycle 40 to 60 mintes complete connection etc as reqd, supplying and drawing following sizes of frls/hffr pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required.a) 3 x 4 sq. mm, b) 6 x 4 sq. mm, supplying and fixing of following capacity, 240/415 volts, 10ka/15ka c series mcbs suitable for lighting and other loads of following poles in the existing mcb db complete with connection, testing and commissioning etc as reqd.a) 40a, 10 ka , fp mcb (415v), b) 63a, 10 ka , fp mcb (415v), supplying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size complete as required.a) 4x 16 sqmm, b) 4x 25 sqmm, supplying, installation, testing & commissioning of led surface mounted batten light of following body material and construction as per is : 10322 with driver (replaceable) as per the requirement with driver efficiency >85%, operating voltage ac 140- 270 volt, frequency 50/60 hz, operating temp range -5 c to 40 c, internal surge protection of 2.5 kv with short & open circuit protection, thd 10%, p. f. 0.95, ip20, cri >80, flicker free, (flicker shouldbe below 5 %), life time (led, driver & electrical circuitry), of minimum 50000 burning hours with 70% of initial lumen maintained till life ends, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation colour matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard. manufactures word mark/ name engraved/ embossing/ screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 120 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). powder coated die cast /extruded aluminium body (thickness > 1.20 mm)a) 40 watt, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in th

CTN :43306526

06 Feb, 2026 NA

Hyderabad-T - Telangana

Tender For corrigendum : supply of machining tools d d -carbide tipped brazed rh internal threading tool of metric 60degree , carbide tipped brazed boring tool shank size 3232 , carbide tipped brazed rh internal recessing tool 4mm size 12 12mm , carbide tipped brazed rh internal recessing tool 6mm size 20 20mm , carbide tipped brazed boring tool size 25 25 p40grade , iso 3 brazed external turning tool shank size 2525 , carbide tip brazed boring tool size 10 10mm p40 grade , tungsten carbide inserts spun 120304 grade p30 , hss tool bit with 10 cobalt size 3 8 3 8 6 long , hss square tool bit s400 grade size 1 4 , tool bit square hss made from grade m 42 size 10 mm 10 , brazed t c tipped tools 156 1616 tool no tip p30 right , brazed t c tipped tools 156 2525 tool no tip p30 right , brazed parting tools iso 7 r 150 1610 p30 grade , brazed tools internal turning to shoulder tools r 2020 , brazed parting off tools iso 7 3220 p30 grade , brazed t c tipped tools 156 1010 tool no tip p30 right , coated carbide inserts for machining hardened die steel , brazed parting tool iso 2r 2525 tip c20 p30 grade , brazed boring tool tungstan carbid 8 mm rh shank iso 8 grade thm , tap hand ground thread in metric coarse pitch and in set 3 pieces , inserts throw away spun120308 , tin coated carbide turning insert cnmg 120408 , coated carbide tpkn1603pdr grade p30 p40 for milling hot die steel , tungsten carbide inserts tpun 160304 grade p30 , brazed tools turning to shoulder iso9 r1212 shank tip p30 , brazed tools turning to shoulder iso 9 r1616 shank tip p30 , brazed parting tool iso 7 25 16r grade k20 , dnmg150604 inserts , coated carbide inserts for machining hardened die steel material 58rc 60rc snmg 120408 , coated carbide inserts for machining hardened die steel material 58rc 60rc snmg 120404 , coated carbide insert cnmg 120404 tn4000 grade p40 with chip breaker , carbide turning inserts throw way type spun 190416 thm grade

CTN :43714353

27 Jan, 2026 NA

Vadodara - Gujarat

Tender For supply of materials for electrification work in different buildings of vadodara municipal corporation. - supplying led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513/crca/ aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark/name 160v to 270v, power factor more than 0.95, thd < 15%, cct 3000 k to 6500k, luminaire efficacy> 85 lumens/watt ,led led driver efficiency > 85 % ( fitting required lm-79 & lm-80 certificates)(note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown.)(a) tube light with integral driver(iii) 20 watts, surge - 2kv,ip-20, conventional 4 feet. sor no.: 2-15-1. cat iii. make : philips/ wipro/osram, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (1) 6 amp. sp one way switch. sor no.: 1-2-7. make : anchor woods/ legrand, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (2) 16 amp. sp one way switch. sor no.: 1-2-7. make : anchor woods/ legrand, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (3) 6/16amp. universal socket. sor no.: 1-2-7. make : anchor woods/ legrand, supplying upvc mini trunking (pvc casing-n-capping) having doublelocking arrangement with grooves, trunking of size not below 12.5 mm in height as per is with accessories of pvc/resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size . (1) 20 mm. sor no.: 1-3-5 , providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (4) 6 a socket. sor no.: 1-2-7. make : anchor woods/ legrand, providing mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size.(e) in existing pipe.(a) 2 wire 1.5 sq. mm. sor no.: 1-4-1(e). make : polycab/kei/finolex, providing mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size.(e) in existing pipe.(b) 2 wire 2.5 sq. mm. sor no.: 1, supplying flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed.(e) 1.50 sq.mm 3 core round pvc sheathed. sor no.: 1-4-5. make : polycab/kei/finolex, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed.(h) 2.50 sq.mm 3 core round pvc sheathed. sor no.: 1-4-5.make : polycab/kei/finolex, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/ metal/wooden box. erected on wall/ ceiling. (1) one no single pole 6 a switch. sor no.: 1-6-1. make : anchor/straco, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/ metal/wooden box. erected on wall/ ceiling. (2) one no 3/5 pin 6 a socket. sor no.: 1-6-1.make : anchor/straco, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/ metal/wooden box. erected on wall/ ceiling. (5) one no single pole 16 a switch & one no 6/16 a universal socket combined. sor no.: 1-6- 1.make : anchor/straco, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate)

Central Government/Public Sector

CTN :43698963

07 Mar, 2026 2.99 Crore

Poonch - Jammu And Kashmir

Tender For provn of dry ration stores under ge 881 ews - sch a part-i (building work):-this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., construction of block of storage shed complete all as shown on drawings and as specified., total amount of sch a part - ii (site clearance/development work), total amount of sch a part - iii (internal electric supply work), total amount of sch a part - iv (protective work), total amount of sch a part - v (area drainage work), total amount of sch a part -vi (road, path and culvert work), total amount of sch a part -vii (external electric supply work), total amount of sch a part -viii (demolition/dismantling work), sch a part - ix (misc items of work) note : this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., double walled corrugated (dwc) pipe for cable protection with outer dia 50mm and inner dia 38mm including suitable size of coupler for connection of pipe complete all as specified and directed., point wiring for one light/fan point/call bell point controlled by one way switch 5 amp with 1.5 sqmm single core multi standed copper conductor frlsh insulated and unsheathed heavy duty cable in colour code including earth wire with cable of size 1.5 sqmm copper conductor frlsh insulated, drawn into and including concealed in pvc conduit of not less than 20mm dia and 1.5mm wall thickness (isi marked) terminated into annealed steel terminal boxes including modular plate and cover for mounting modular switch/ socket switches, sockets, fan regulators etc complete all as specified and directed., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on same board., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on independent board., earthing complete with galvanized steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15mm dia gi light grade protection pipe, 20mm dia gi medium grade watering pipe with funnel including charcoal, dust, salt, pcc m-15 type b1 in pit with angle iron (25x25x3)mm frame work with precast rcc 1:2:4 type b-1 cover reinforced with 8mm dia tmt bars @ 150mm c/c both ways and 12mm dia ms fabricated handle, test point etc. in and including light grade gi protection pipe 20mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate no. 3 of ssr part-i complete with necessary earth work in any type of soil, removal of soil to a distance not exc. 50m, testing on completion complete all as specified and directed.note:- on testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction., inverter led light fittings batten type, 1x20w led, 230v, complete with all accessories internally per wired including lithium lon battery with charging time 8 to 10 hours and back up time up to 4 hours and connecting up with pvc insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified and directed., led street light/ security light fitting 35 watt, 230 v, ac, outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 66 protection, including provision of gi bracket made of 40mm dia, gi pipe, 1.5m long, bend to shape, complete all as specified., mcb, spn, 240 volts, 40 to 63 amps,10ka, breaking capacity, complete all as specified., mcb, spn, 240 volts, 6 to 32 amps,10ka, breaking capacity,

Corporations And Associations And Others

CTN :43719375

04 Feb, 2026 4.75 Lacs

Delhi - Delhi

Tender For supply of electrical materials for day to day maintenance of ei at balak ram hospital. - supply of 6- 32 amps rating, sp mcb, c curve, 10 ka breaking capacity., supply of 6- 32 amps rating, dp mcb, c curve, 10 ka breaking capacity., supply of 40 amp, 2 pole isolator ., supply of 63 amp, 2 pole isolator ., supply of 63 amp, 4 pole isolator ., supply of 100 amp, 4 pole isolator ., supply of 40 amp rating 2 pole rccb, 30 ma ., supply of 63 amp rating, 4 pole rccb, 30ma ., supply of 20 a, spn, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure., supply of 25 mm dia isi marked, pvc conduit, supply of pvc batten / angle holder., supply of 2+6 way, spn, single door, mcb db, supply of 2+2 way, spn, single door, mcb db, supply of 4 way (4 + 12), tpn, mcb db, double door horizontal type., supply of 6 way (4 + 18), tpn, mcb db, double door horizontal type., supplying of led recessed/surface down lighter (round /square/ rectangular) smd type of following body material with pmma and prismatic diffuser and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection ,thd 10% , p. f. 0.95, ip20, cri >80, ugr (unified glare rating) 19, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), life time of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k / 6000 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 and 120 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). powder coated die cast /extruded aluminium body including trim with aluminium reflector. 12 -15 watt, supplying of panel light 2x2 ft., of following body material and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection,thd 10% , p. f. 0.95, ip20, cri >80, ugr (unified glare rating) 19, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends ,cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin), sdcm(standard deviation color matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate (t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by eng

CTN :43683593

02 Feb, 2026 NA

West Tripura - Tripura

Tender For supply of socket outlet flush type 6 amp , street light made of pressure die cast housing with toughned glass ip 66 protection 110 lm or w 25 watt , street light made of pressure die cast housing with toughned glass ip 66 protection. 100 watt , switch single pole piano type 06 amp , recess mounting luminarige 34 w ceiling fitting separate electronic driver high brightness smd , call bell ding dong , lt underground xlpe insulated screemed pvc bedded armoured electric cable heavy duty 1100 volt grede isi alumn conductor 3 core 10 sqmm , multi core round pvc insulated pvc cable 1. 5 sqmm copper conductor three core , poly cab flexible cable 3 core 1. 5 sqmm , pvc copper cable 1. 5 sqmm 1 core , pvc copper cable 1 sqmm 1 core , pvc insulated multi standard single core cable with copper conductor 1100v of size 4 sqmm , pvc almn cable 2. 5 sqmm 1 core , pvc cable 1. 5 sqmm copper conductor twin core , pvc cable almn conductor 1. 5 sqmm 1100v s or c , pvc copper cable 2. 5 sqmm 2 core , pvc copper cable 4 sqmm 1 core , pvc copper cable 4 sqmm 2 core , pvc insulated multistrand single core f or r cable with copper conductor 1100v of size 1 sqmm , pvc insulated single core sheathed with solid cable 4 sqmm with alumn cable conductor , pvc insulated two core sheathed with solid cable 4 sqmm with alumn cable , cable jointing kit 11kv 95 sqmm 3 core out door , campact switch disconnector fuse unit of current ratting ac 32 amp 2 pole 415 v , capacitor 4 mfd , change over switch 100 amp tpn 415 v with sheet metal enclose , decorative type led fitting 18 watt 6000k , drop out copper tinned barrel fuse element of capacity 20 amps 11 kv , heating element 1500 watt p type , led lamp 18 watt 419mm ultra bright pl l 4 pin stright line pin , pl l lamp led 18 watt , plug top outlet 15 amp 3 pin , plug top outlet 5 amp s or t , pressure die cast alluminium road way lumanaries led light fitting 60 watt , pvc adhesive tape 20 mm x 10 mtr long , pvc adhesive tape 20mm 25 mtr long , pvc board 4x4 inch , pvc board 4x7 inch , pvc board 8x10x2 inch , pvc casing caping 25mmx 2 mtr , pvc insulated twin twisted copper conductor flexible wire with copper conductor of size 23 or 0. 0076 , rccb having ip 20 protection 6 or 10 ka breafing cap with scpo current rating 63 amps sensitively , sheet metal enclouser with two pin and earth plug with 20 amp spn mcb , star delta starter for 25 hp motor fully automatic contractor size 32 over load relay , star delta for 15 hp motor. , switch socket combination 15 amp box type , switch socket combination 3 pin 5 amp , switch socket combination 6 pin 6 or 16 amp , accessories for exhaust fan 300 mm sweep but ventilator lower shouter , adjustable sleaves for refrigerator 286 ltr , adjustable sleaves for refrigerator 300 ltr , compressor for refrigerator 300 ltr , compressor for water cooler 300 ltr , exhaust fan motor for water cooler 1 or 5 hp 25w , fan blade for refrigerator , fan motor for deep freezer , gas refrigerant r 134 450 gm bottle , gas refrigerant r 22 , heating element 230 v 2 kw triangle type , ice tray plastic , lead connection for geyser 600 mm as per sample , running capacitor 45 mfd for water cooler , running capacitor for ac 50 or 60 mfd 230 volts 50 hz , thermostate switch for window type ac 1. 5 or 2 ton cap 230 v 50 hz , cotton waste , lead pig , lead wool , nipple gi 40mmx100mm , non return valve 100mm dia with gm working parts , pvc water tank 500 ltr , rubber tubing for joint leakage , sodium carbonate for water treatment , tee gi reducer 40mmx20mm , aluminium aldropsliding bolt 250 mm length rod and 16 mm 4 socket , aluminium door //bid details2 / 122handle 100mm , aluminium door stoper with rubber shoe length with cover plate 140mm , anti termite treatment , ceiling rose , fill roofing bitumenious in roll of 1 mtr x 20mtrlong type iii grade i , glass pane clear or frosted 3mm thick , glass pane clear or frosted 5mm thick , hydroulic door closer , m seal , ms or steel handle for steel window 100mm ,

CTN :43710617

03 Feb, 2026 NA

Indore - Madhya Pradesh

Tender For supply of ceiling pandal , table , table cover , table frill , syn carpet , curtain , sofa vip , sofa leather , fiber chair , sofa chair vip , tea table , temprory toilet with gate , water stall , kanat , jumbo cooler , steel tub , green chatai , white bichyat , takhat , cushion chair , round table , gadi , rajai , takiya , wellcome gate , stage decoration , selfi point , flower decoration , props , nursary , led screen 8x8 , ballon decoration , baricate frame , baricate pipe , refreshment packed food , lunch packed food , lunch catering service , blanket , chader , wooden pletfom , cloth decoration kantha , artificial flower decoration , road iron dome , super strucher shed , dari , italian chairs , die medal 3 inch with printed ribbon , wooden trophy memento , brass trophy memento , acrylic trophy memento , frame memento , national leaders memento , plate case memento

CTN :43725680

11 Feb, 2026 NA

Saugor - Madhya Pradesh

Tender For supply of cutting , multi meter analog , out side micrometer , plumbing tools , soldering iron exchangeable copper tip , tong tester clamp on multi meter , rawal plug tool , firmer chisel , ring spanner , spanner double ended , ring spanner off set , wrench adjustable , clamps c , cleaning tray , electric soldering iron , file, half round ,second cut , file, square second cut , file, square round , file, triangular , second cut , flat file , second cut , flat file , bastard , grease gun , hammer ball peen , insulated screw driver , hammer mallet , hammer plastic , hand vice , outside micrometer , spanner clyburn , spanner d. e. set of 12 pieces , spanner t. flocks for screwing up and up-screwing inaccessible , spanner, adjustable , spanner, ring set of 12 metric sizes , spanners socket with speed handle, tbar,ratchet and universal , spark plug spanner 14mm x 18mm x size , taps and dies complete sets 5 types , vernier calliper , number punch , s. s tape , h. p. torch , oxygen gas pressure , acetylene gas pressure , co2 gas pressure regulator , argon gas pressure regulator , flash back arrester torch mounted , flash back arrester cylinder mounted , micro meter inside with extensionrods. , vernier caliper , vernier bevelprotractor blade with acuteangleattachment , file knifee dge smooth , file feath eredge smooth , file triangular smooth , file round second cut , file square second cut , feeler gauge , file triangular second cut. , file flat second cut safeedge , file swisstypeneedle , file half round second cut , file half round bastard , file round bastard , file hand second cut , file card , spanner-doubleended , machine vice , wing compass , handhammerwithhandle , torquewrenchstandard ratchettype , powertoolsfor fastening , different profile gauges platetype -for demonstration , knurlingtool diamond straight and diagonal index able boring bar with inserts , temperaturegauge , dowelpin straight , standard tap screws , lapping plate , medium carbon heat treated alloy steel metric studs and bolts along with nuts , capsscrews , drill gauges , stopcock , slip-on forged steel flange , pipe threading die with handle , pulleys for v-belt or flatbelt , v-belt or flat belt steel rule with metric and british graduation, steel rule graduated both in metric and english unit, try square, caliper inside spring type. , caliper hermaphrodite spring type, caliper outside spring type, caliper, odd leg, spring joint, divider spring type, divider spring type, scriber, centre punch, centre punch, centre punch, centre punch, screw driver, chisel cold flat, cold chisel flat and cross cut, hammer ball peen with handle, hammer ball peen with handle. , hammer ball peen with handle. , hammer ball peen with handle. , file flat - second cut, file flat smooth, magneto spanner set, file flat, file half round, hacksaw frame fixed type, safety goggles. , dot punch, measuring steel tape, combination plier insulated, screw driver insulated, electrician screw driver thin stem insulated handle, heavy duty screw driver insulated, electrician screw driver thin stem insulated handle, knife double bladed electrician, knife folded stainless steel, neon tester, hammer, cross peen with handle, file flat rough double cut, file, round, fine double cut, file flat, fine double cut, file square, fine double cut, file triangular fine double cut, pliers long nose, pliers long nose, pliers flat nose, pliers flat nose, line tester, tweezers, allen key set of 12 pieces, electrician screw driver, philips screw driver set of 5 pieces, screw driver blade, screw driver blade, wire cutter and stripper, helmet fiber, hand shield fiber, flat tongs, file half round, file flat, //bid details2 / 115

Central Government And Public Sector

CTN :43726048

17 Feb, 2026 8.98 Lacs

Chamba - Himachal Pradesh

Tender For supply of plywood 4mm , plywood 6mm size 6 feet x 4 feet , commercial plywood 12mm , wire mesh , plain glass for winddows , bevelled looking mirror 600x450mm , glass shelf size-600x120x5 mm , sliding door bolt ms , glass putty , hinges 3 inch , hinges 4 inch , ss towel rail 24 inch , fevicol , fevicol sr , nails 0. 5 inch , nails 1 inch , nails 2 inch , nails 3 inch , nails 4 inch , anchor bolt 16 x 75 mm , anchor bolt 12 x 150 , anchor bolt 4 inch , wooden screw 1 inch , wooden screw 0. 75 inch -20 mm dia , wooden screw 0. 5 inch 15 mm dia , wooden screw 50 x 8 mm , pvc gitti 20mm , pvc gitti 1 inch , pvc gitti 50mm , pvc gitti 75mm , flush door shutter 32mm , chipping hammer , hammer-1kg , hammer 2000 gram , spirit level , hand saw , chiesel 6 size , chiesel 8 , bench vice 8 , takora 6 , measuring tape 5 mtr , measuring tape 30mtrs , mason pvc pan 16 inch , hand shovel , trowel-big , trowel-medium , gauging trowel , plumb bob , water cane for sprinkler , garden hedge cutter , tailor scissor -big , gi elbow 0. 5 inch , g. i. elbow- 0. 75 inch , g. i. elbow-1 inch , gi elbow 50mm , gi tee 0. 5 inch , gi tee 20mm , gi tee 1 inch x 1 inch , gi tee 50mm , gi nipple 0. 5 inch x 2 inch , gi nipple 15mm x3 inch , gi nipple 15x100mm , gi nipple 15x150mm , gi nipple 0. 75 inch x 2 inch , gi nipple 20mm x3 inch , gi nipple 0. 75 inch x 4 , gi nipple 20mm x6 inch , gi nipple 25mm 2 inch , gi nipple 1 inch x 3 inch , gi nipple 25x100 mm , g. i. nipple 25 mm x 150mm , gi nipple 50 mm x 150 mm , brass stun nipple , cp extension nipple-0. 5 inch , extension nipple 0. 5 inch x 1 inch , g. i. union 2 inch dia , gi socket 15mm dia , g. i. socket 0. 75 inch , g. i. socket 1 inch dia , gi socket 2 inch , gi socket reducer 2x3 , gi bend 50mm 45 degree , gi bend 50mm 90 degree , gi bend for 2 inch dia pipe , cp double angle valve 15mm , cp bib cock -short body , cp bib cock -long body , health faucet , cp shower , flushing cistern , cistern float valve , waste coupling 32mm size full thread with 100mm height , hack saw blade 0. 5 inch x 12 , cutting wheel 4 inch , grinding wheel bosch 4 inch , m s welding electrode-3. 15 sq. mm , base spindle for cp tap , brass spindle rubber , mild steel plug0. 5 , gate valve-2. 5 inch brass , pipe wrench 10 , heavy duty pipe wrench 12 inch , pipe wrench 14 , heavy duty pipe wrench 18 inch , heavy duty pipe wrench 24 inch , pipe wrench 36 , pipe wrench 48 heavy duty , chain wrench 6 inch , adjustable wrench 8 long , adjustable wrench 10 inch , adjustable wrench 12 long , double ring spanner sets 6 to 32 mm , screw driver kit consisting of 8 screw driver , allen key set set of 10 pcs , thread die tool set 0. 5- 0. 75- 1- 1. 5- 2 , hand grease gun 1 kg , bearing puller -three jaw -10 inch , g. i. union 65mm dia , g. i. union 3 inch dia , g. i. union 4 , gi bend 75mm 45 degree , gi bend 75mm 90 degree , 120 degree gi bend 3 dia , gi bend 4 medium -b class , bearing 6306 , coupling star washer for 40 hp pump-motor , servo grease mp , gi pipe 75 mm , gi pipe 4 medium b- class , ms flange 100nb , ms flange 3 inch , ms flange 50mm , 80 nb rubber gasket , 100 nb rubber gasket , sling wire 8mm , pipe vice suitable for pipe dia 10-90mm , gland dori //bid details2 / 102

CTN :43710725

14 Feb, 2026 NA

Bangalore - Karnataka

Tender For supply of hydraulic cyl hm 110 qty d d - tube as per sample_drg with oparation of turning inner dia_ grinding and horning steel tube 60_3 mm od x 48 mm id st 52 _din 2391_ , steel round 36 mm dia is _ 1570 c20 _7_2 mtrs_ , steel round 65 mm dia is _ 1570 c40 _10 mtrs_ , piston rod 25 mm dia x 558 mm long turning_ hard thread cutting_ hard chrome plating and grinding as per drg steel round 25 mm dia ck 45 _din 17200_ , steel round 50 mm dia bright turning and nickel plating as per drg is _ 1570 c40 , steel round 62 mm dia is _ 1570 c40 _3_6 mtrs_ , steel round 60 mm dia bright turning milling and nickel plating as per drgis _ 1570 c40 , swivel bearing ge 25_es40 , nitrile rubber _o_ ring 44_04 mm id x 3_53 mm dia to be moulded with die , wear guide 30 mm od x 25 mm id x 9_7 mm thk as per sample_drg moulding with flame_retardant polymeric rubber , rod seal 33 mm od x 25 mm id x 5_7 mm thk as per sample_drg moulding with polyurethane rubber compound , wiper seal 33 mm od x 25 mm id x 5 mm thk as per sample_drg moulding with polyurethane rubber compound , piston seal 50 mm od x 39 mm id x 4_2 mm thk ptfe with nitrile rubber as per sample_drg to be moulded with die , wear guide 50 mm od x 45 mm id x 5_5 mm thk as per sample_drg bronze bush with ptfe coating inner surface , nitrile rubber _o_ ring 19 mm id x 3_0 mm dia to be moulded with die , steel nylock nut m16 x 1_5 mm is _ 7002_2005 , welding rod 3_15 mm dia x 350 mm long , paint primer redoxide ) /bid number : gem/2025/b/6987012 * /dated: 24-01-2026 & & / bid document 1 / 19

Water Tap Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Corporations And Associations And Others

Central Government And Public Sector