Get complete information related to latest Water Well Repair Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Water Well Repair Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Water Well Repair Tenders.
Tender For work of carrying out sub soil exploration to get soil bearing capacity at foundation level of structure and provide detailed geotechnical investigation report based on sub-soil exploration including bore log, for the work of jabugam distry ex. rbmc of sukhi reservoir project.
Tender For provision for source development at solar dfu due to bore collapse at jjy scheme samicha under contingency work 2025 block- kumbhalgarh, district- rajsamand
Tender For work of construction and commissioning of bore hole bydth/rotary/ combination rig of 200 mm dia, supply and installation of energy efficient submersible pump sets, panels,cables and other allied works including commissioning and testing of tube well and p,l & j of pipe line underjurisdiction of div didwana with 24 months defect liability
Tender For tender for supply of rain water harvesting - earth work in excavation over areas (exceeding 30 cm in depth , one and half mtr in width as well as 10 sqm on plan) including disposal of excavated earth lead up to 50m and lift up to one and half mtr , dispose earth to be level and neatly dressed complete as per the instruction of engineer-in-charge.all kinds of soil/ soft rock/ weathered rock , return earth filling by available excavated earth (excluding rock) or locally available sand in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming(allow for breading up lumps , shrinkage etc.) watering lead upto 50 metre and lift up to 1.5 m complete as directed by the engineer-in-charge , providing and laying plain cement concrete 1isto3isto6 (1 cement isto 3 coarse sand isto 6 graded stone aggregate 20mm nominal size )in foundation , plinth wherever necessary including desalinating , finishing , curing etc. as per specification all complete but centring and shuttering etc. , providing and laying reinforced cement concrete work 1isto1.5isto3 (1 cement isto 1.5 coarse sand isto 3 graded stone aggregate using 20 mm down screened and washed) including machine mixing , placing in position and mechanically vibrating in footing , column , plinth beam up to plinth level and like including preparing of the top surface finishing curing ecomplete in all respects as per specification and direction. , hire and labour charges for providing and fixing straight shuttering for concrete works to anywhere at any floor (including staging) including strutting , propping etc. and removal of form or striking out after completion of works as directed and specified by the engineer-in-charge. a) foundations , footings , bases of columns plinth beam etc , steel reinforcement (for reinforced cement concrete work) including transporting , decoiling , straightening , derusting , placing , cutting to requisite length , hooking , bending to correct shape , placing in proper position and binding with 16 gauge black annealed wire at every intersection including removal of loose rust and applying a coat of cement wash if necessary complete in all respects as per drawing and at any floor as directed. , brick work with common burnt clay modular bricks of class designationisto cement mortar 1isto6 (1 cement isto 6 coarse sand). 7.5 in foundation and plinth inisto , 12 mm cement plaster of mix isto 1isto 4 (1 cement isto 4 coarse sand ) , supplying , filling , spreading & leveling stone boulders of size range 5 cm to 20 cm , in recharge pit , in the required thickness , for all leads & lifts , all complete as per direction of engineer-in-charge. , supplying , filling , spreading & leveling gravels of size range 5 mm to 10 mm , in the recharge pit , over the existing layer of boulders , in required thickness , for all leads & lifts , all complete as per direction of engineer-in-charge. , supplying , filling , spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit , in required thickness over gravel layer , for all leads & lifts , all complete as per direction of engineer -incharge. , supplying pea gravel as per direction of engineer -incharge. , supplying upvc slotted pipe 100 mm dia as per isisto12818 as per the dircetion of engineer -incharge. , supplying u-pvc pipes (working pressure 4 kg per cm square) single socketed pipe 110 mm dia as per the dircetion of engineer -incharge. , supplying upvc coupler for upvc drainage pipes 110 mm as per the dircetion of engineer -incharge. , supplying upvc bend 87.5 degree 110 mm bend as per the dircetion of engineer -incharge. , supplying upvc pipe clip 110 mm bend as per the dircetion of engineer -incharge. , boring/drilling bore well of required dia for casing/ strainer pipe , by suitable method prescribed in isisto 2800 (part i) , including collecting samples from different strata , preparing and submitting
Tender For to repair the existing water pipeline, to removethe pollution coming int the water, to supply watertanker to fulfill water requirement, to supplylabours fo water tanker coming from centralworkshop, to supply labours to operate bore, tosupply chlorine kerba and work on improvementof drinking water supply at different places likecity area and as well as different village area inmaktampura ward in south west zone.(arc)
Tender For supply of disconnecting and taking out defective under ground lt cable from trenches pole pipe floor wall etc including bricks gi pipes and removing from work site , supply laying testing and connecting xlpe sheathed cable heavy duty with stranded aluminium conductor 1100 volt grade of size 4.0 core 10 sqmm. , all as per boq item no 2.00 here in before but of size 4.0 core 16 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 25 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 50 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 70 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 95 sqmm. complete all as specified , laying only and connecting xlpe sheathed heavy duty with stranded aluminium conductor 1100 volt grade of size 4 core 10 sqmm , all as per boq item no 8.00 here in before but of size 4.0 core 16 sqmm. complete all as specified , all as per boq item no 8.00 here in before but of size 3.5 core 25 sqmm. complete all as specified , all as per boq item no 8.00 here in before but of size 3.5 core 50 sqmm. complete all as specified , all as per boq item no 8.00 here in before but of size 3.5 core 70 sqmm. complete all as specified , excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts wells cesspits manhole pier hole , returning filling in including spreading levelling watering and well ramming in layers not exc. 250mm in soft loose soil complete all as specified and as directed. , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil complete all as specified and as directed. , m and l sand cushioning dry in trenches for protec tion of ug cables below above and around the ug cable laid in trenches of 230mm , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable complete all as specified and as directed. , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia laid in trenches under roads fixed to poles , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia laid in trenches under roads fixed to poles , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia laid in trenches under roads fixed to poles , m and l for boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore complete all as specified. , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 10 16 sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 25 50 sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 x 70 150 sqmm , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 25 mm bore dia laid in trenches , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 40 mm bore dia laid in trenches , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 50 mm bore dia laid in trenches , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 100 mm bore dia laid in trenches , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm mm buried directly in ground earth pit not less than 2.25m below ground level , dismantling existing lt panels of
Tender For supply of r polypropylene random copolymer pipes 32 mm outer dia isi marked pn 16 sdr 7.4 uv stabilised and anti microbial fusion , all as per item no 20.00 here in before but of size 25 mm bore. , supply and fixing sluice valve flanged type 80 mm bore isi marked as per is 14846 2000 with valid cmlno. batch no. and manufacturer serial no. class pn 1.6 with brass spindle , all as per item no 22.00 here in before but of size 100 mm bore of pipe . , all as per item no 22.00 here in before but of size 150 mm bore of pipe . , all as per item no 22.00 here in before but of size 200 mm bore of pipe . , material and labour for ductile iron fittings for spigot socket ductile iron pipes such as bends any type radius and angle taper any type , supply and fixing cast iron air released valve with two air outlet is 14845 2000 dk fig 4 and fixing up in water main of 150 mm , construction of brick masonry valve pit of size 0.9m x 0.9m x 0.9m depth internal dimension , construction of brick masonry valve pit of size 1.20m x 1.20m x 0.9m depth internal dimension , m l for cement concrete 1 4 8 type d 2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete including demolition complete all as specified , m l for cement concrete 1 2 4 type b 0 using 12.5mm graded crushed stone aggregate as in coping of brick masonary including , m l for brick work with flyash bricks old size straight or curved on plan to any radius exc 6m , m l for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth on walls in cement mortar 1 4 complete all as specified and directed. , supply and fixing of gm globe gate valve suitable for 50 mm bore pipe with iron wheel head screwed both ends for iron ppr pipes isi marked , all as per item no 33.00 here in before but suitable for 40 mm bore pipe. , all as per item no 33.00 here in before but suitable for 25 mm bore pipe. , all as per item no 33.00 here in before but suitable for 20 mm bore pipe. , s f for straight plain brass ferrules or connecting screws screwed bolt ends of 20 mm bore pipe complete all as directed , all as per item no 37.00 here in before but of sizer 25 mm bore , returning filling in including spreading leveling watering well ramming in layers n. exc 25 cm thick complete all as directed. , removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. , wrecking crow bar or claw bar as per is 706 (q3)
Tender For providing of custom bid for services - flp fan motor rewinding,custom bid for services - 3hp 3 phase motor rewinding,custom bid for services - 5hp 3 phase motor rewinding,custom bid for services - 25hp 3 phase motor rewinding,custom bid for services - 1 hp 3 phase motor rewinding,custom bid for services - 4-way valve repairing,custom bid for services - thread making on brass body and lath work,custom bid for services - lath work for sensing shaft, service water pump shaft and other miscellaneous lathe work,custom bid for services - bore cutting in sprocket,custom bid for services - 7-1/2 hp 3 phase motor rewinding