Latest waterproofing treatment repair Tenders | Government waterproofing treatment repair Tenders

State Government

CTN :45327688

01 Jun, 2026 NA

Udhampur - Jammu And Kashmir

Tender For providing / fixing of following tent items on item rate basis (per unit basis) from the reputed tent service provider having valid license of tent/ shamyana house for the year 2026-27 within jurisdiction of pwd (r b) division ramnagar. (3rd call) - shamyana (water proof), shamyana (ordinary), kanat, chair, chair with white cover, sofa set of 5 person capacity, table 2-6" x 5-0", green /red mat, stage including durate + stairs (complete finished), fan, pardha, lighting system for shamyana., vegetable lunch (rice+rajmah+dal+ambal)., drinking bottle water 200 ml., tea, tea (with 2 snacks), cooler, centre table, canopy 10x10, path decoration 10x10, high tea (with 3 snacks + 1 sweet dish)., vvip lunch (3 main course + rice+chapati+1 sweet dish+salad+raita)., note: - the above (all or part items) are required as and when need arises and lowest firm will be called for installation / arrangement with short time notice / telephonically minimum 24 hours before commencement of function and firm is bound to execute the work within short notice. the carriage should be included in all of the above mentioned items.

Central Government/Public Sector

CTN :45324560

16 Jun, 2026 85.78 Lacs

Visakhapatnam - Andhra Pradesh

Tender For project supply, installation, testing and commissioning of 20nos radar and accessories. sh civil works at yarada visakhapatnam phase-ii - extra for concrete work in superstructure above floor v level for each four floors or part thereof by mechnical means., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) thermo- mechanically treated bars of grade fe-500d or more., centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers, brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in :cement mortar 1:4 (1 cement : 4 coarse sand), providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., providing and fixing is : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm, fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately), providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). frame size 45 x 70 mm, providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite

CTN :45332914

05 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of store for igloo - cement opc 43 grade , coarse sand river oblique m sand , graded stone aggregate 20mm , graded stone aggregate 40mm , pcc solid block of size 400 x 400 x 200mm 75 kg per cm2 , tmt steel 25mm grade fe 500 , tmt steel 16mm grade fe 500 , tmt steel 12mm grade fe 500 , binding wire 18 gauge , oil bound distemper , primer , polythene membrane sheet of grade 2504 thickness 150 micron , water proofing compound in 1 kg packing , blast door 3000 x 2800 as per elevation including all fitting and fixtures , ventilator 600mm dia with mesh , non sparking gritless flooring moc , explosion proof ip66 lighting and fittings , lightning protection system cu strip oblique finial , 16 sqmm 2 core lt ug xlpe cable 200rm and point wiring with 4 nos flame proof lights , transparent pipe 5mm dia bore for water leveling best quality , iron bar 600mmx16mm to bend 12mm and 10mm tmt bar , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle , fish line best quality , plumb bob iron best quality , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle min wt 5 kg without handle , picks axes with chiesel and point ends kudali 14 cp nominal wt 3 kg overall length min 595mm with handle , showel square nose 14 gauge tata high carbon steel blade size 310 x 245mm shaft size 710mm fitted with strong steel crutched wooden handles , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft colour green , multipurpose non slip rubber reusable gloves for scrubbing cleaning brick work etc colour olive green oblique black , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia outer pipe od 60mm and inner pipe od 48mm of 3mm all as per brief technical specification , ms centering plates of size 90cm x 60cm of thickness 14 guage with two stiffeners including all necessary jointing arrangement nut bolt and jointing cleats as per tech specs , portable ms body needle vibrator machine with power 3 hp to 5 hp weight 20 to 30 kg petrol engine with min frequency 50 hz voltage 200 to 300 for concrete vibrating as per tech specs

CTN :45316496

15 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For procurement of annual rate for various type of tools, materials, machinery parts, minerals and medicine etc - axe in all size with handle (mhow made), rose cutter (falcon, sharpex or equivalent), bagad kainchi / hedge cutter (falcon, sharpex or equivalent), danda kainchi without gear (falcon, sharpex or equivalent), danda kainchi with gear (falcon, sharpex or equivalent), broom (jhadu) minimum 450 sticks, broom (jhadu dande wali) minimum length 5 feet + and 450 sticks, hand wash (in all size), nepkin towel (vip) minimun size- 1 feet x 2 feet, hot and cold plastic can minimum capacity 20 litter, chasme for safety purpose, face shield for safety purpose minimum 5 inch length, plastic drum minimum capacity 100 litter, plastic drum minimum capacity 200 litter, darate / gadase / bakke minimum weight 1 to 1.5 kg. with handle, garden sword (talwar) minimum weight 200 to 300 grams length 1 meter, width 2 to 3 inch, gum boot in all size, heavy shoes for tree cutting labour, hand gloves rubber, hath gadi two wheel, hath gadi four wheel, hath gadi wheel tube, hath gadi wheel tyre, janjeer iron 4 to 5 feet length rust proof minimum weight 400 grams, mattock (geti) minimum weight 1.5 kg. (tata or equivalent), mattock (geti) with iron handle minimum weight 2.5 kg., handle (mattock/shovel) minimum length 2.5 feet, shovel (fawada) minimum weight 1 kg. (tata or equivalent), shovel (fawada) with iron handle minimum weight 2 kg, mouth mask (isi mark), palti fawada / panja minimum weight 900 gram, pitra parvat name plate iron size 12 inch x 9 inch with 24 inch rod, plastic tub17 inch fresh material minimum weight 450 grams, steel tub 15 to 20 inch minimum weight 1 kg., safety helmet, spray pump battery operated, supdi iron / scoop spoon with handle (minimum capacity 400 gram), tourch (kishan or equivalent), trowel (khurpi) minimum weight 300 grams, water jhare minimum capacity 7 litter in thick plastic, kudali (small mattock) iron minimum weight 1.5 kg. and minimum length 1 feet 6 inch, bamboo (length 20 feet cylinderical 50 mm minimum girth), multi colour crystal pebbles / stones, oil paint in all colour, plastic paint in all colour, distemper in all colour (20 liter), burn oil (jala hua engine oil), brush 5 inch (jyoti, swastik,wheel or equivalent), brush 6 inch (jyoti, swastik,wheel or equivalent), painter patta, tarpin oil, thiner (1 liter pack), bucket iron minimum weight 1 to 1.5 kg. (tata, jindal or equivalent ), bucket plastic minimum weight 1.5 kg., lock 75 mm 4 key (isi mark), lock 90 mm 4 key (isi mark), brush cutting machine engine (sharpex, honda, stihl or equivalent), brush cutting machine body (sharpex, honda, stihl or equivalent), brush cutting machine motor binding work complete, brush cutter machine hub (sharpex, honda, stihl or equivalent), brush cutter machine lattu (sharpex, honda, stihl or equivalent), brush cutter machine patta (sharpex, honda, stihl or equivalent), brush cutter machine gear (sharpex, honda, stihl or equivalent), brush cutter machine air filter (sharpex, honda, stihl or equivalent), brush cutter machine condenser (sharpex, honda, stihl or equivalent), brush cutter machine carborator (sharpex, honda, stihl or equivalent), brush cutter machine startar (sharpex, honda, stihl or equivalent), brush cutter machine switch (sharpex, honda, stihl or equivalent), brush cutter machine clutch (sharpex, honda, stihl or equivalent), brush cutter machine handle (sharpex, honda, stihl or equivalent), brush cutter machine excelerator (sharpex, honda, stihl or equivalent), brush cutter machine plug (sharpex,honda,sthil or equivalent), brush cutter machine bearing (sharpex,honda,sthil or equivalent), brush cutter machine block pisten set (sharpex,honda,sthil or equivalent), brush cutter road minimum 8 mm thickness 9 teeth (sharpex,honda,sthil or equivalent), brush cutter machine wire (squre shap)minumum length 50 meter / bundle (sharpex, honda, stihl or equivalent), lawn mover machine engine (sharpex, honda, stihl or equivale

CTN :45057581

01 Jun, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

CTN :45298738

02 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of cement opc 43 grade , coarse sand river oblique m sand , graded stone aggregate 20mm , graded stone aggregate 40mm , pcc solid block of size 400 x 400 x 200mm 75 kg per cm2 , tmt steel 25mm grade fe 500 , tmt steel 16mm grade fe 500 , tmt steel 12mm grade fe 500 , binding wire 18 gauge , oil bound distemper , primer , water proofing compound in 1 kg packing , blast door 3000 x 2800 as per elevation including all fitting and fixtures , ventilator 600mm dia with mesh , non sparking gritless flooring moc , explosion proof ip66 lighting and fittings , lightning protection system cu strip oblique finial , 16 sqmm 2 core lt ug xlpe cable 200rm and point wiring with 4 nos flame proof lights , transparent pipe 5mm dia bore for water leveling best quality , iron bar 600mmx16mm to bend 12mm and 10mm tmt bar , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle , fish line best quality , plumb bob iron best quality , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle min wt 5 kg without handle , picks axes with chiesel and point ends kudali 14 cp nominal wt 3 kg overall length min 595mm with handle , showel square nose 14 gauge tata high carbon steel blade size 310 x 245mm shaft size 710mm fitted with strong steel crutched wooden handles , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft colour green , multipurpose non slip rubber reusable gloves for scrubbing cleaning brick work etc colour olive green oblique black , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia outer pipe od 60mm and inner pipe od 48mm of 3mm all as per brief technical specification , ms centering plates of size 90cm x 60cm of thickness 14 guage with two stiffeners including all necessary jointing arrangement nut bolt and jointing cleats as per tech specs , portable ms body needle vibrator machine with power 3 hp to 5 hp weight 20 to 30 kg petrol engine with min frequency 50 hz voltage 200 to 300 for concrete vibrating as per tech specs

State Government

CTN :45288353

29 May, 2026 NA

Ramtek - Maharashtra

Tender For material supply for all type construction work for year 2026-27 (under all fund) - sand (kanhan), sand local, soft murun, hard murun, metal 100 mm, metal 80 mm, metal 40 mm, metal 20 mm, metal 10 mm, dust, rcc pipe 300 mm with colar, rcc pipe 450 mm with colar, rcc pipe 600 mm with colar, rcc pipe 800 mm with colar, rcc pipe 900 mm with colar, rcc pipe 1000 mm with colar, cement 53 grade isi mark, still 6 mm, still 8 mm, still 10 mm, still 12 mm, still 16 mm, centring tar, vibrator needle, water trankar & tractor troali, backhoe loader, vibrator roller, simple steering road roller, mixchar machine, excavator 70 to 120, excavator 120 to 220, fiori 1 cubic meter, fiori 2 cubic meter, centring plate, water proof compound, acrylic polymer modified liquid, acrylic polymer modified waterproofing powder, fibre glass mesh, plastic emulsion paint, water proof cement paint, lead / zink base oil paint, oil bound distemper, primer, washabe oil bound distemper, putty, birla white cement, terpentine, wood primer, information board still with painting, single lef door 16 mm thik, single lef door 32 mm thik, solid panel pvc internal door shutter, door kittas, door fremas, aluminium fixed windows (two track sliding ), aluminium fixed windows (three track sliding ), aluminium fixed windows with mosquito net (three track sliding ), chequered tiles, caramic tiles, vetrifide tiles, cota stone, marble tiles, granite tiles, red bricks (hat bhatta), red bricks (round bhatta), bricks fly aish, peving block 60 mm, peving block 80 mm, rcc compound poles 8ft, rcc compound poles 6 ft, pvc nahani, gally trap 15*10 mm, swr pipe 110 mm, screw down bib 15mm, ladies ceramic urinal, wall mount urinal, water close pan complit, indian orissa pan, basin pan, water storage tank 500 ltr, water storage tank 1000 ltr, water storage tank 2000 ltr, steel work, mild steel hollow pipe, mild steel i section beam, mild steel c section beam, mild steel angle, cenring kills, nut bolt and washer, profile sheet isi 0.50 mm, profile sheet fancy isi 0.50mm, g.i. sheet, stenless steel seatting bench, mild steel seatting bench, rcc bench, barbed wire / fenshing wire, electric brecker machine

State Government

CTN :45286476

29 May, 2026 NA

Gondia - Maharashtra

Tender For call for all types of building materials - list, cement isi marks 53 gread (ultratech/acc/birlagold/ambuja), composite cement, steel isi mark (6 mm), steel isi mark (8 mm), steel isi mark (10 mm), steel isi mark (12 mm), steel isi mark (16 mm), steel isi mark (20 mm), centring wire & nail, metal rod (angle), profile sheet 3 x16, profile sheet 3 x12, profile sheet 3 x10, profile sheet 3 x 8, steel square pipe 1 x 2, steel square pipe 1.5 x 2, steel square pipe 2 x 2, steel square pipe 2 x 3, 8 mm metal crusher broken (pachgaon) with roylti, 10 mm metal crusher broken (pachgaon) with roylti, 20 mm metal crusher broken (pachgaon) with roylti, 20 mm metal hand broken (pachgaon) with roylti, 40 mm metal hand broken (pachgaon) with roylti, 40 mm metal crusher broken (pachgaon) with roylti, 80 /100 mm metal hand broken with roylti, sand transport with roylti & all taxes, murum transport with roylti & all taxes, transporting/ carting (murum /malma /mati / material), fly ash bricks is type std size, rcc np-2 second 150 mm pipe with collars, rcc np-2 second class 800 mm pipe with collars, rcc np-2 second 600 mm pipe with collars, rcc np-2 second 450 mm pipe with collars, rcc np-2 second 300 mm pipe with collars, cement seet 4 x 10, rcc tanks for shok pit (mgnrega/sbm) standard size, rcc tanks cap for shok pit (mgnrega/sbm) standard size, indian toilet seet with murga, camod toilet seet with murga, wash besin complete set, hex nut bolt, wooden doors, fyber doors, wooden windows, steel doors, windows and ventilors and grills etc, tiles ceramic, tiles glezz, tiles vetrified, wall tiles, putty per bag, paint primer per ltr, paint regular per ltr, oil paint steel work per ltr, oil paint wall & roof per ltr, washable oil-bound distemper, waret proof cement paint per bag, pevar block 60 mm, pevar block 80 mm, pevar block 100/120 mm, scafolding & shuttering (centering), brass nal (tap) per nos, gi nal (tap) per nos, pvc nal (tap) per nos, brass ferrule 1/2" inch isi mark, mta 1/2" inch isi mark, fta 1/2" inch isi mark, pvc pipe 1/2" inch isi mark, pvc pipe 25 mm dia. isi mark, pvc pipe 32 mm dia. isi mark, pvc pipe 40 mm dia. isi mark, pvc pipe 50 mm dia. isi mark, pvc pipe 60 mm dia. isi mark, pvc pipe 75 mm dia. isi mark, pvc pipe 90 mm dia. isi mark, pvc pipe 110 mm dia. isi mark, pvc pipe 140 mm dia. isi mark, pvc pipe bend, galvanized steel pipe 110 mm dia. isi mark, galvanized steel pipe 90 mm dia. isi mark, galvanized steel pipe 75 mm dia. isi mark, galvanized steel pipe 65 mm dia. isi mark, galvanized steel pipe 32 mm dia. isi mark, galvanized steel pipe 20 mm dia. isi mark, ci sluice valve 75 mm, ci sluice valve 80 mm, ci sluice valve 90 mm, ci sluice valve 110 mm, ci sluice valve 140 mm, non return valve 75 mm, non return valve 80 mm, non return valve 90 mm, non return valve 110 mm, non return valve 140 mm, air valve 75 mm, air valve 90 mm, air valve 110 mm, air valve 150 mm, galvanized steel pipe and fittings 1.50 inch, galvanized steel pipe and fittings 2.00 inch, water tank 500 ltr, water tank 1000 ltr, water tank 2000 ltr, water tank 5000 ltr, green net 90 %, batching and mixing palnt, mixture machine rent, rolar machine rent, jcp rent, vibrator, water tanker, kateri tar, chain link fencing, pvc door (36"x78"), acp door (25"x75"), borewell flashing, borewell drilling, borewell casing pipe iron, borewell casing pipe pvc/cpvc, pv panal 50w per nos, solar street light installation charge per light, solar on-grid plant 1 kw with all charges, led bulb 9 w, led bulb 12 w, led bulb 15 w, led bulb 20 w, led bulb 30 w

State Government

CTN :45286479

29 May, 2026 NA

Gondia - Maharashtra

Tender For call for all types of building materials - list, cement isi marks 53 gread (ultratech/acc/birlagold/ambuja), composite cement, steel isi mark (6 mm), steel isi mark (8 mm), steel isi mark (10 mm), steel isi mark (12 mm), steel isi mark (16 mm), steel isi mark (20 mm), centring wire & nail, metal rod (angle), profile sheet 3 x16, profile sheet 3 x12, profile sheet 3 x10, profile sheet 3 x 8, steel square pipe 1 x 2, steel square pipe 1.5 x 2, steel square pipe 2 x 2, steel square pipe 2 x 3, 8 mm metal crusher broken (pachgaon) with roylti, 10 mm metal crusher broken (pachgaon) with roylti, 20 mm metal crusher broken (pachgaon) with roylti, 20 mm metal hand broken (pachgaon) with roylti, 40 mm metal hand broken (pachgaon) with roylti, 40 mm metal crusher broken (pachgaon) with roylti, 80 /100 mm metal hand broken with roylti, sand transport with roylti & all taxes, murum transport with roylti & all taxes, transporting/ carting (murum /malma /mati / material), fly ash bricks is type std size, rcc np-2 second 150 mm pipe with collars, rcc np-2 second class 800 mm pipe with collars, rcc np-2 second 600 mm pipe with collars, rcc np-2 second 450 mm pipe with collars, rcc np-2 second 300 mm pipe with collars, cement seet 4 x 10, rcc tanks for shok pit (mgnrega/sbm) standard size, rcc tanks cap for shok pit (mgnrega/sbm) standard size, indian toilet seet with murga, camod toilet seet with murga, wash besin complete set, hex nut bolt, wooden doors, fyber doors, wooden windows, steel doors, windows and ventilors and grills etc, tiles ceramic, tiles glezz, tiles vetrified, wall tiles, putty per bag, paint primer per ltr, paint regular per ltr, oil paint steel work per ltr, oil paint wall & roof per ltr, washable oil-bound distemper, waret proof cement paint per bag, pevar block 60 mm, pevar block 80 mm, pevar block 100/120 mm, scafolding & shuttering (centering), brass nal (tap) per nos, gi nal (tap) per nos, pvc nal (tap) per nos, brass ferrule 1/2" inch isi mark, mta 1/2" inch isi mark, fta 1/2" inch isi mark, pvc pipe 1/2" inch isi mark, pvc pipe 25 mm dia. isi mark, pvc pipe 32 mm dia. isi mark, pvc pipe 40 mm dia. isi mark, pvc pipe 50 mm dia. isi mark, pvc pipe 60 mm dia. isi mark, pvc pipe 75 mm dia. isi mark, pvc pipe 90 mm dia. isi mark, pvc pipe 110 mm dia. isi mark, pvc pipe 140 mm dia. isi mark, pvc pipe bend, galvanized steel pipe 110 mm dia. isi mark, galvanized steel pipe 90 mm dia. isi mark, galvanized steel pipe 75 mm dia. isi mark, galvanized steel pipe 65 mm dia. isi mark, galvanized steel pipe 32 mm dia. isi mark, galvanized steel pipe 20 mm dia. isi mark, ci sluice valve 75 mm, ci sluice valve 80 mm, ci sluice valve 90 mm, ci sluice valve 110 mm, ci sluice valve 140 mm, non return valve 75 mm, non return valve 80 mm, non return valve 90 mm, non return valve 110 mm, non return valve 140 mm, air valve 75 mm, air valve 90 mm, air valve 110 mm, air valve 150 mm, galvanized steel pipe and fittings 1.50 inch, galvanized steel pipe and fittings 2.00 inch, water tank 500 ltr, water tank 1000 ltr, water tank 2000 ltr, water tank 5000 ltr, green net 90 %, batching and mixing palnt, mixture machine rent, rolar machine rent, jcp rent, vibrator, water tanker, kateri tar, chain link fencing, pvc door (36"x78"), acp door (25"x75"), borewell flashing, borewell drilling, borewell casing pipe iron, borewell casing pipe pvc/cpvc, pv panal 50w per nos, solar street light installation charge per light, solar on-grid plant 1 kw with all charges, led bulb 9 w, led bulb 12 w, led bulb 15 w, led bulb 20 w, led bulb 30 w

State Government

CTN :45206601

28 May, 2026 NA

Gondia - Maharashtra

Tender For call for all types of building materials - list, cement isi marks 53 gread (ultratech/acc/birlagold/ambuja), composite cement, steel isi mark (6 mm), steel isi mark (8 mm), steel isi mark (10 mm), steel isi mark (12 mm), steel isi mark (16 mm), steel isi mark (20 mm), centring wire & nail, metal rod (angle), profile sheet 3 x16, profile sheet 3 x12, profile sheet 3 x10, profile sheet 3 x 8, steel square pipe 1 x 2, steel square pipe 1.5 x 2, steel square pipe 2 x 2, steel square pipe 2 x 3, 8 mm metal crusher broken (pachgaon) with roylti, 10 mm metal crusher broken (pachgaon) with roylti, 20 mm metal crusher broken (pachgaon) with roylti, 20 mm metal hand broken (pachgaon) with roylti, 40 mm metal hand broken (pachgaon) with roylti, 40 mm metal crusher broken (pachgaon) with roylti, 80 /100 mm metal hand broken with roylti, sand transport with roylti & all taxes, murum transport with roylti & all taxes, transporting/ carting (murum /malma /mati / material), fly ash bricks is type std size, rcc np-2 second 150 mm pipe with collars, rcc np-2 second class 800 mm pipe with collars, rcc np-2 second 600 mm pipe with collars, rcc np-2 second 450 mm pipe with collars, rcc np-2 second 300 mm pipe with collars, cement seet 4 x 10, rcc tanks for shok pit (mgnrega/sbm) standard size, rcc tanks cap for shok pit (mgnrega/sbm) standard size, indian toilet seet with murga, camod toilet seet with murga, wash besin complete set, hex nut bolt, wooden doors, fyber doors, wooden windows, steel doors, windows and ventilors and grills etc, tiles ceramic, tiles glezz, tiles vetrified, wall tiles, putty per bag, paint primer per ltr, paint regular per ltr, oil paint steel work per ltr, oil paint wall & roof per ltr, washable oil-bound distemper, waret proof cement paint per bag, pevar block 60 mm, pevar block 80 mm, pevar block 100/120 mm, scafolding & shuttering (centering), brass nal (tap) per nos, gi nal (tap) per nos, pvc nal (tap) per nos, brass ferrule 1/2" inch isi mark, mta 1/2" inch isi mark, fta 1/2" inch isi mark, pvc pipe 1/2" inch isi mark, pvc pipe 25 mm dia. isi mark, pvc pipe 32 mm dia. isi mark, pvc pipe 40 mm dia. isi mark, pvc pipe 50 mm dia. isi mark, pvc pipe 60 mm dia. isi mark, pvc pipe 75 mm dia. isi mark, pvc pipe 90 mm dia. isi mark, pvc pipe 110 mm dia. isi mark, pvc pipe 140 mm dia. isi mark, pvc pipe bend, galvanized steel pipe 110 mm dia. isi mark, galvanized steel pipe 90 mm dia. isi mark, galvanized steel pipe 75 mm dia. isi mark, galvanized steel pipe 65 mm dia. isi mark, galvanized steel pipe 32 mm dia. isi mark, galvanized steel pipe 20 mm dia. isi mark, ci sluice valve 75 mm, ci sluice valve 80 mm, ci sluice valve 90 mm, ci sluice valve 110 mm, ci sluice valve 140 mm, non return valve 75 mm, non return valve 80 mm, non return valve 90 mm, non return valve 110 mm, non return valve 140 mm, air valve 75 mm, air valve 90 mm, air valve 110 mm, air valve 150 mm, galvanized steel pipe and fittings 1.50 inch, galvanized steel pipe and fittings 2.00 inch, water tank 500 ltr, water tank 1000 ltr, water tank 2000 ltr, water tank 5000 ltr, green net 90 %, batching and mixing palnt, mixture machine rent, rolar machine rent, jcp rent, vibrator, water tanker, kateri tar, chain link fencing, pvc door (36"x78"), acp door (25"x75"), borewell flashing, borewell drilling, borewell casing pipe iron, borewell casing pipe pvc/cpvc, pv panal 50w per nos, solar street light installation charge per light, solar on-grid plant 1 kw with all charges, led bulb 9 w, led bulb 12 w, led bulb 15 w, led bulb 20 w, led bulb 30 w

Waterproofing Treatment Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

State Government

State Government