Latest wax polishing Tenders | Government wax polishing Tenders

corporations/Associations/Others

CTN :40205566

13 May, 2025 17.00 Lacs

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of material 500 bedded medical college jhansi - supply of material, earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in- charge:, 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete., r.c.c. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in column excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inclduing supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being included in this item, rcc work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inlcuding supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being inlcuded in the item., class-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work., r.c.c. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in foundation excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inclduing supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being included in this item, class-150 half brick work in 1:4 cement and coarse sand mortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.including suply and wastage & overlapping.thermo-mechanically treated bars of grade fe-500d or more., 15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand), providing and fixing 1mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. using m.s. angels 40x40x6 mm for diagonal braces, providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete., one priming coat & one coat oil distemper on new work inlcuding supply of all materials. labour and t&p etc. required for proper completion of the work, painting or varnishing or iron works in small areas with one coat of ready mixed in priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and t&p etc. required for proper completion of work paint to be used should confirm to the i.s.i. no. 103 1950, finishing walls with acrylic smooth exterior paint of required shade: - new work (two or more coat applied @ 1.67 ltr./10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm., kota stone slabs 20 mm thick in risers of steps, skir

CTN :40135836

13 May, 2025 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : phosphating, painting & varnishing of 250kg hsld bomb inside ofj premises. specification: - phosphatin

CTN :39641741

09 May, 2025 74.70 Lacs

Delhi - Delhi

Tender For bid to ras providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; wall panelling blinds wallpaper wpc panels upholstery varnishing polishing; service provider

CTN :40228770

26 May, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of services to undertake misc works at hqnavc - succession board stickering , polishing of photo frames , aluminium cladding pressure washing , cleaning and removal of grime on exterior walls , melamine polishing of awati hall table , replacement of 22 nos drawer channels , fitment of 5 led ceiling light 01 led baton light and 01 photo frame light including cable laying and fitment charges , defective 10 nos hydraulic door closer removal and fitment charges , varnishing of file tray , fitment of plastic coated steel net at 50 m length and 03 m height at lay apart store yard , polishing of appointment boards , obd painting job at grime affected interior walls , fitment of 02 nos 5 w and 10 w tube lights including wiring , fitment of 10 led round panel light 20 w with fitment and wiring charges

CTN :40204534

13 May, 2025 NA

Hooghly - West Bengal

Tender For repairing and rewiring of internal wiring at pump house or kiosk box and repairing heat varnishing of motorfor the financial year 2025-26 at different rli scheme under champadanga (a-m) sub-division under chinsurah (a-m) division, chinsurah

CTN :40204536

13 May, 2025 NA

Hooghly - West Bengal

Tender For annual maintenance of internal wiring at pump house or kiosk box and repairing and heat varnishing of motors at different rli schemes under balagarh (agri-mech.) sub-division under chinsurah (agri-mech.) division in the district of hooghly

CTN :40204537

13 May, 2025 NA

Hooghly - West Bengal

Tender For annual maintenance of internal wiring at pump house or kiosk box and repairing and heat varnishing of motors at different rli schemes under chinsurah (agri-mech.) sub-division under chinsurah (agri-mech.) division in the district of hooghly

State Government

CTN :40124042

09 May, 2025 NA

Multi City - Maharashtra

Tender For work of repair of lt mcc panel doors, their locking arrangement, replacement of door gasket and varnishing during aoh of unit no.4 at btps 500mw

CTN :40137485

26 May, 2025 NA

Vidisha - Madhya Pradesh

Tender For annual contract rate for supply of building electrical fitting material - supply of building electricals fitting materials, pvc insulated cable fr with copper multi strand conductor isi marked 2x2.5 mm, pvc insulated cable fr with copper multi strand conductor isi marked 2x4 mm, pvc insulated cable fr with copper multi strand conductor isi marked 2x1.5 mm, pvc insulated cable fr with copper multi strand conductor isi marked 1.0 mm, approved make electronic dimmer/requlator for fan 650w, approved make electronic dimmer/requlator for fan 1000w, ceiling fan (energy saver 50 w)-1200 mm sweep, ceiling fan (energy saver 50 w)-1400 mm sweep, approved make wall mounting fan complete with wall bracket ,canopy,blades,speed regulator 400 sweep, approved make fresh air fanac 230-250 volts 300 sweep, approved make exhaust fan heavy duty with mounting frame,blades ac230-250 300mm sweep 900 rpm, approved make exhaust fan heavy duty with mounting frame,blades ac230-250 380mm sweep 900 rpm, servicing & overhauling of cooler fan motor, pump including replacemnt of distribution & delivary pipes,pvc elbows, painting etc. as reqd. complete with nacessary material & labour including replacement of connection leads., cleaning,overhauling, servicingof ceiling /exhaust /wall bracket fanby applying grease & oil, including testing with mounting / hanging arrangement including replacement of saftypins, checknuts,locknut,nut bolts etc. making perfect allignment & refitting at site as required., rewinding of fans by copper enamelled wire of suitable gauge including all required material, insulation, varnishing,connection leads,oiling .greasing etc completewith testing including dismentalling& refitting of fan at site.scrap old material is not returnable to the department., providing & refilling of wood wool /khas pads of normal size cooler panels 3 nos includings craping of oldpaint,making surface even,painting withred oxideprimer & two coats of paint of required shade including fixingnew wiremesh complete, chemical servicing of window /split air conditioning unit 1.5tr /2tr capacity including cleaning of cooling &condensing units,filters,grills etc & all other parts oiling & greasing of fan motor testing of a.c unit etc, cleaning,overhauling, servicingof ceiling /exhaust /wall bracket fan by applying grease & oil, including testing with mounting / hanging arrangement including replacement of saftypins, checknuts,locknut,nut bolts etc. making perfect allignment & refitting at site as required., labour rateforpointwiringalight /fan/twincontrol light /socketout let on seperateboard / call bell point in (open) surface rigid steel conduit system., labour rateforpointwiringalight /fan/twincontrol light /socketout let onseperateboard/callbellpoint inrecessed/concealed rigidsteelconduit system., labour rateforpointwiringalight /fan/twincontrol light /socketout let on seperateboard / call bell point in (open) surface rigidpvcconduit system., labour rateforpointwiringalight /fan/twincontrol light /socketout let onseperateboard/callbellpoint inrecessed/concealed rigidpvcconduit system., labour rateforpointwiringapowerpoint inrecessed/concealed rigidsteel conduit system including labour for fixing earth continuity conductor ., labour rate for fixing rigid pvc conduit as per specification in recessed/concealed conduit wiring system.20mm, labour rate for drawingcables inexisting rigidsteel conduit ( surfaceor recessed/concealed ) "a" 2 wires -1 2.5 sq mm / 4 sq mm / 6 sq mm, xlpe insulated power cable (conformingis-7098 ) 1100 volt grade/heavy duty powerc unarmoured 2 core 6 sqmm, led of 1 to 3w each assembled on single mcpcb, having color temp 6500k & having 50000 burning hrs life with minimum @l70,led luminiare 1 x 1, 24w , 4-6.5k, led of 1 to 3w each assembled on single mcpcb, having color temp 6500k & having 50000 burning hrs life with minimum @l70,led luminiare 2 x 2, 36w, 4-6.5k, led luminiare 1x1, 24w p

Wax Polishing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government