Get complete information related to latest Wearing Piece Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Wearing Piece Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Wearing Piece Tenders.
Tender For corrigendum : supply of wearingpiece for side bearer on bogie bolster suspension as per icf drawing no. t-0-5-649, alt.l(small l)/18, item no.1, material & specification as per drawing. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of wearingpiece dia 150 x 36 mm for side bearer on bolster suspension to icf drg no. emu/m-0-5-010, alt.l (small l)/3 and conforming to icf/md/spec no.141,rev.nil. drg no : emu/m-0-5-010,alt : alt.l (small l)/3, type drg: icf. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For auction sale of depot non ferrous scrap - scrap and condemned brass wearingpieces of sorts and sizes,complete or incomplete,with or w/o attachment, as it is,us & ur. qty:-1425.00 kg loc:-material lying at room no.a,bin no.01 & bin no.22 in nbg judw remarks -1. loading by purchaser 2.delivery will be given by actual weight on electronic weighing scale cap-1000 kgs.
Tender For auction sale of depot non ferrous scrap - brass diesel part scrap including wearingpieces, suspension bearings etc., sorts and sizes,as is where is basis,as it is. location - godown no-01a/ssb two stack (a) and (b)
Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-wc-081581/ accnh /rcf 2-wc -081405 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/12/0048. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearingpieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.
Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-wc-081432/ accnh /rcf 2-wc -081390 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/12/0049. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearingpieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.
Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-wc-081505/ accnh /rcf 2-wc -081431 accnh/rcf 3-wc -081327 accnh/rcfnote : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/12/0050. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearingpieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.
Tender For supply of wearingpiece for side bearer on bolster suspension to icf drawing no. . emu/m-0-5-010/1 alt-i/3.(small 'l') note: material and specification as per drawing. (bronze) [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of wearingpiece for side bearer on bolster suspension bronze to drg. no. emu/m-0 5-010/1 alt-i/3. [ warranty period: 30 months after the date of delivery ] ]
Tender For procurement of consumables for oh of u6, 2026 under ahp-mm and tm dept, ktps. - pu tube connector 1/2 1/2" to 10 mm npt(m) pu tube connector ( push male pu tube connector thread size: 1/2inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube connector 1/4" to 10 mm npt(m) 1/4" to 10 mm npt(m) pu tube connector ( push male pu tube connector thread size: 1/4 inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube connector size 10 mm diax3/8in bsp(m) ( push male pu tube connector thread size: 3/8 inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube,od-10mm, id-6.5mm pu tube od-10mm,id-6.5mm,wall thickness1.75 mm,temp range-40f to+160f,hardness shorea98,brust pressure(psi)-450, vacuum rating-to 28"hg,working pr.(psi)-150 @70f ( make:-aeroflex/spac pneumatic ), anabond 666 size 310 gm # ( thixotropic silicone sealant in hdpe cartridge (310g) make:-anabond ltd ), bend pipe, 90 deg, 40nbx40nb,ms seamless for wet ash system moc-ms thk-3.7mm as per sch 40 steel pipe ( schedule 40 no negative tolerance in thickness is allowed ), bend,ms,200x200x90 deg ash water line ( seamless, schedule 40 thk-9.52mm no negative tolerance in thickness is allowed ), bend,ms,150x150x90 deg ash water line ( seamless,schedule 40 thk-9.52mm no negative tolerance in thickness is allowed ), bend pipe,90 deg, 50nbx50nb,ms seamless for wet ash system moc:-ms thk-4mm as per sch 40 steel pipe, bend,ms,80x80x90 deg ash water line ( seamless, sch-40 thk-7.0mm no negative tolerance in thickness is allowed ), bend,ms,100x100x90 deg ash water line ( seamless,sch-40 thk-7.5mm no negative tolerance in thickness is allowed ), u-clamp,m16 for 8 in ci pip for ahp bktpp moc: ms; size: 232mm dia,308mm length,75m ( with 02 nos of nuts & 02 nos of washers for each u-clamp ), turn buckle,gi ( with ms mounting bracket type-eye to eye eye hole should be for m20 bolt total length-1350mm thk-20mm square section-50x250mm ), gasket,200nb coupling,neoprene rubber for ash conveying line ( temp withstand capacity-140 deg celcius ), flat gasket,8 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,9 inch,od,11 inch,th.,1/4 inch ( temp withstand capacity-140 deg celcius ), flat gasket,6 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,7 in,od,8-3/4 inch,th.,1/ 4 inch ( temp withstand capacity-140 deg celcius ), flat gasket,10 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,11 in,od,13 in,th.,1/4 in ( temp withstand capacity-140 deg celcius ), flat gasket,9 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,10 in,od,12 in,th.,1/4 in ( temp withstand capacity-140 deg celcius ), gasket,graphite coated asbestos,10 inch # # for sleeve coupling in vacuum line ( temp withstand capacity-140 deg celcius ), gasket,9 inch,graphite coated asbestos # # for sleeve coupling in vacuum line,stg.-2 ( temp withstand capacity-140 deg celcius ), gasket,6 inch,graphite coated asbestos # # for sleeve coupling in vacuum line,stg.-2 ( temp withstand capacity-140 deg celcius ), gasket for esp hopper gate mouth hand hole od-170mm,id-120mm,thk-5mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper chute face od-400mm,id-315mm,thk-3mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper hand hole for actuator sa25e125 od-118mm,id-90mm,thk-9mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper v