Latest wearing plate Tenders | Government wearing plate Tenders

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

Central Government And Public Sector

CTN :45034322

20 May, 2026 2.56 Crore

Dharchula - Uttarakhand

Tender For supply of coated labyrinths along with their fasteners for dhauliganga power station : : - head cover wearing plate top cheek plate with hvof coating , bottom ring wearing plate bottom cheek plate with hvof coating , upper fixed labrinth forged with hvof coating , upper moving labrinth forged with hvof coating , lower fix labrinth forged with hvof coating , lower moving labyrinth , special screw m18 , hexagon screw m20x90x38, 21-012 , bottom ring special screw , m20 , head cover special screw , m20 , hexagon screw m16x70x38

Central Government/Public Sector

CTN :45031576

07 May, 2026 NA

Multi City - Rajasthan

Tender For auction sale of depot ferrous scrap - scrap coach cut parts , foot step, guide, bracket, safety strap, pin, beam, wearing plate, compensating rings, round, bolt, hanger, destruction tube, ms sheet, plate, collar, pipes, angle, flat, strip, rod, round, suspension strap, valve, ctrb bearing and its parts,retaining ring, roll bar, lever, tube, spring, safety strap, gear,rail piece, fabricated structure item, p way items and other similar items. with or without negligible non-ferrous attachment if any. [bin 24 &31]

Central Government/Public Sector

CTN :45031656

15 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of rolling stock - u/s and condemened overage coach (1.) coach no.-82901, type-gs, railway-wcr, built year-1982. (2.) coach no.-890010, type-rh, railway-wcr, built year-1989. for stock holder sse/c&w/g/kota. hq breakup order no.01/2026 vide hq letter no-wcr/m/c/02/705 dt.06.03.2026. sr.dme l.no.-m.100/2 vol.-1 dt.13.03.2026. (a)list missing items- nill (b) per bogie reclaim items list:-a.bogie items:-1-complete trolly=02 nos. including following items. 1.1-wheel set with axle box, roller bearing and dynamo pulley=04 set+1, 1.2-axle box spring=16nos and bolster spring=08nos, 1.3-brake gear fittings=all items intact, 1.4-bronze wearing piece=04nos(not visible), 1.5-bolsters=02nos, 1.6-suspension link=16nos, 1.7-wearing plate=04nos(not visible), 1.8-l.s.beam(plank)=04nos, 1.9-equalising stay with pin=04nos. total reclaim weight-12.00mt. note:-only rru 4.5kw=01 nos(03 kg) reclaimed in 890010/rh bogie is in excess.as per reclaim list. coaches will be sold and handed over as is where is basis. purchaser has to arrange all safety equipment like fire extinguishers for ensuring safe working condition. at the time of delivery all items including zero value items such as like glass, pvc sheet, rubber, fiber, ply etc to be completely cleared from the location. purchaser should clear the site before final delivery. all reclaimed material must be return to be concern sse at his section in good condition. other than melting scrap if found during cutting & loading will be seperated & not delivered. purchasers are requested to see the lot/site and approchable road before bidding. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by nos only. cutting allowed for easy loading. material lying in rajasthan state.

Central Government/Public Sector

CTN :45031657

15 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of rolling stock - u/s and condemened overage coach (1.) coach no.-00102, type-wgaccn, railway-wcr, built year-2000. (2.) coach no.-98116, type-wgaccn, railway-wcr, built year-1998 with availbale ferrous-non ferrous excluding reclaim items. for stock holder sse/c&w/g/kota. hq breakup order no.01/2026 vide hq letter no-wcr/m/c/02/705 dt.06.03.2026. sr.dme l.no.-m.100/2 vol.-1 dt.13.03.2026. (a)list missing items- nill (b) per bogie reclaim items list:-a.bogie items:-1-complete trolly=02 nos. including following items. 1.1-wheel set with axle box, roller bearing and dynamo pulley=04 set+1, 1.2-axle box spring=16nos and bolster spring=08nos, 1.3-brake gear fittings=all items intact, 1.4-bronze wearing piece=04nos(not visible), 1.5-bolsters=02nos, 1.6-suspension link=16nos, 1.7-wearing plate=04nos(not visible), 1.8-l.s.beam(plank)=04nos, 1.9-equalising stay with pin=04nos. total reclaim weight-12.00mt. b.toilet fan-04+03=07nos and total weight-1.6+1.2=2.8 kg(in both bogie) as per reclaim list. coaches will be sold and handed over as is where is basis. purchaser has to arrange all safety equipment like fire extinguishers for ensuring safe working condition. at the time of delivery all items including zero value items such as like glass, pvc sheet, rubber, fiber, ply etc to be completely cleared from the location. purchaser should clear the site before final delivery. all reclaimed material must be return to be concern sse at his section in good condition. other than melting scrap if found during cutting & loading will be seperated & not delivered. purchasers are requested to see the lot/site and approchable road before bidding. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by nos only. cutting allowed for easy loading. material lying in rajasthan state.

Central Government/Public Sector

CTN :45010816

07 May, 2026 NA

Burnpur - West Bengal

Tender For supply of internals of wobblers d d - wearing plate 0161013 51.022 , ring 42crmo4 qt 0161013 51.024 , ring 42crmo4 qt 0161013 51.023 , wearing plate 0160024 51.024 , ring 42crmo4 qt 0160024 51.023 , ring 42crmo4 qt 0160024 51.022

CTN :45011317

07 May, 2026 NA

Dehradun - Uttarakhand

Tender For supply of ms shuttering plate 01 mtr x 01 mtr , ms pipe 06 mtr long 40 mm dia , ms adjustable jack , ms base plate , swivel coupler , mason trawel 150 mm , traffic cone , sintex 500 ltrs , shovel , pick axes , pan motor , spade , crowbar , electric steel cutting machine , steel cutter machine blade

Central Government And Public Sector

CTN :44923043

28 May, 2026 NA

Nagpur - Maharashtra

Tender For corrigendum : wearing plate, part no. re15.123. make: plasser or equivalent. warranty: 25 kms of deep screening or 30 months from the date of supply, whichever is earlier [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45013620

13 May, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of wearing plate for adjusting body bogie clearance. as per drg. no.- icf/sk3-0-5-007, item no.-4. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44803147

07 May, 2026 NA

Gurgaon - Haryana

Tender For corrigendum : supply of various spares of gangway of rmgl d d - balance frame assembly , latching handle assembly , latching rod assembly , limit rope , bellow retraction rope assembly , upper fixing support of protection plate , lower fixing support of protection plate , wearing strip1 , wearing strip2 , coupler wearing plate , step plate assembly , gangway full assembly , bellow assembly ) /bid number : gem/2026/b/7416736 * /dated: 08-04-2026 & & / bid document 1 / 16

Wearing Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors