Latest weather coat Tenders | Government weather coat Tenders

Central Government/Public Sector

CTN :45335153

11 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of enamel synthetic, exterior, finishing, signal red. specification:- is 8662:2024 (third revision), isc:537 as per is 5:2007(sixth revision) (reaffirmed year 2022), along with rdso amendment no. 1a(rev.1.0) as an additional requirement. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45335154

11 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of enamel synthetic, exterior, finishing, golden yellow. specification:- is 8662:2024 (third revision), isc:356 as per is 5:2007(sixth revision) (reaffirmed year 2022), along with rdso amendment no. 1a(rev.1.0) as an additional requirement. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45335155

11 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of enamel synthetic, exterior, finishing, white. specification:- is 8662:2024 (third revision) along with rdso amendment no. 1a(rev. 1.0) as an additional requirement. [ warranty period: 30months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45338576

12 Jun, 2026 NA

Yamunanagar - Haryana

Tender For supply of enamel synthetic, exterior, undercoating, to ral ds 0708040. specification:- is 8662:2024 (third revision), along with rdso amendment no. 1a (rev.1.0) as an additional requirement. special terms & conditions:- (i) material shall be packed in 20 ltrs. metal containers conforming to is:2552/1989_amend.1 (third revision) (reaffirmed 2018) grade b-1. (ii) the goods should be dispatched within 2 months from the date of manufacturing and firm will give an undertaking that the material supplied is not more than 60 days old. (iii) suppliers have to write on the container batch no., date, month,year of manufacturing and also write the paint can be used before 12 months from the date of manufacturing. (iv) keeping properties - not less than one year. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45341930

05 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate including gst and cess for implementation of different scheme under mgnrega at khoyrasole dev. block and 10 nos of gp under khoyrasole dev. block for the year 2026 27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee

Central Government / Public Sector

CTN :45351992

06 Jun, 2026 96.7 Thousand

Guntakal - Andhra Pradesh

Tender For supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3)

State Government

CTN :45198711

01 Jun, 2026 45.0 Thousand

Noida - Uttar Pradesh

Tender For corrigendum : supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , ready mixed paint, air drying, red oxide zinc chrome, priming (v2) as per is 2074 (q3)

CTN :45214556

29 May, 2026 NA

Pithoragarh - Uttarakhand

Tender For bid to ras supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , gum spirit of turpentine (oil of turpentine) conforming to is 533 (q3)

CTN :45351004

08 Jun, 2026 NA

Kinnaur - Himachal Pradesh

Tender For supply of ordinary portland cement , stone aggregate 20mm , coarse sand shall , stone aggregate 40mm , rr stone , tmt steel bar 16mm dia , tmt steel bar 12mm dia , tmt steel bar 10mm dia , tmt steel bar 8 mm dia , binding wire 20 gauge 0 point 9mm , shuttering water proof plywood of size 8feet x 4feet and 12mm , nails 2 inch for shuttering , nails 3 inch for shuttering , nails 5 inch for shuttering , quick setting compound make , 2nd class hardwood square section 50mmx50mm length 3 point 0 m , wooden ballies 75mm to 100 mm dia 3m , pbs roll is 1322 to 62 weight min 3 kgs per sqm and minimum length 10 mtr width 1m , bitumen and blown type and 85 or 25 grade , water proofing compound , hdpe film of 400 micron , loop holes of size 600x500mm with a angel iron 50x506mm andiron 40x6 mm covered with 3 mm size 200x50x6mmof 8 mm thick mild steel plate 600x500mm of 75x75mm 100 mm , wooden scantling 3 point 20m long section 100x75mm , steel door of size 900x1800 mm shall be provided as per drawing , lightning conductor made of copper tube 150 cm long x 25mm dia , supply dual edge 8 pin cloth hanger , supply pipe 150mm dia or bukhari outlet dia , supply ms round pipe 20mm dia of medium class for telehphone outlet , pre- painted g aluminum zinc coating sheet 0 point 60mm thickstrength of 550 mpa , 75mm dia pvc pipe , ms plate 10 mm , ms plate 20 mm , shredded rubber 150 mm , ordinary portland cement grade 43 , coarse sand , binding wire 20 gauge 0 point 9mm , nails 2 inch , nails 3 inch , nails 5 inch , quick setting compound , 2nd class hardwood and square section 50mmx50mm length 3 point 0m , wooden ballies 75mm to 100 mm dia 3m long , pbs roll is 1322 to 62 weight min 3 kgs per sqm and minimum length 10 mtr width 1m laid , bitumen and blown type and 85 per 25 grade primer for roof treatment , synthetic enamel paint colour , turpentine oil , loop holes of size 600x500mm angel iron 50x506mm and 45x45x6 mm and flat iron 40x6 mm covered with 2 mm thick size 200x50x6mm flat iron mild steel plate 400x480mm , steel door of size 900x1800 mm shall be provided as per drawing ms angle 50x50x6 mm , lightning conductor made of copper tube 150 cm long x 25mm dia prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm , shredded rubber 150 mm crumb rubber tiles size 500 x 500 x 50 mm , pvc single core 1 point 5 sqmm , pvc single core 2 point 5 sqmm , cable pvc insulated and pvc 1100v , pvc conduit pipe round shape 50 mm dia and 3 point 00 mm , pvc l bend for 20 mm , pvc t 20 mm , pvc square box 4 inch x 4 inch , pvc elbow 20 mm dia , dry wall screw 50 mm , mcb single pole 230v ac and 50 hz and 6 ampc and 10 amp , switch piano flush type15 amp and socket multi purpose 5 or 15 amp piano type with gang box , pvc ceiling rose 2 or 3 terminal , insulation tape 25 mm width 9 mtr , distribution box mcb box 12 way , stainless steel u clamp for 20 mm pvc , isolator 63 amp dp , earthing of building provided using 3 mm dia of size 60cm x 60cm 6mm , pvc t 20 mm for conduit pipe , dry wall screw 50 mm long , mcb single pole 230v ac and 50 hz and 6 ampcand 10 amp , insulation tape 25 mm width 9 mtr long , distribution box 12 way , isolator 63 amp , earthing of building provided using 3 mm dia gi , stone aggregate 10mm to 12mm graded , coarse sand sand shall be clean , stone aggregate 20mm graded , stone aggregate 40mm graded //bid details 2 / 62

CTN :45329379

16 Jun, 2026 NA

Bandipora - Jammu And Kashmir

Tender For stage contract for supply of workshop/line material as and when required during financial year 2026-27 or till next contract gets finalised - electrical store/workshop items/: as per is standards and kpdcl approved vendors only wherever applicable, bush rods 12mm(lt) of standard make, bush rods 19mm(lt) of standard make, bush rods 25mm(lt) of standard make, bush rods 30mm(lt) of standard make, ht bush for dts of standard make(33/11kv as per requirement and relevant is), lt bush set for 250kva dt of standard make, lt bush set for 63kva dt of standard make, lt bush set for 100kva of standard make, aluminum thimbles 95sqmm of standard make, aluminum thimbles 120sqmm of standard make, aluminum thimbles 185sqmm of standard make, aluminum thimbles 240sqmm of standard make, aluminum thimbles 300sqmm of standard make, soldress clamp for 630kva, soldress clamp for 400kva of standard make, soldress clamp for 250kva of standard make, soldress clamp for 100kva & 63kva, gi channel/angle/flat/clamps of sizes (as per requirement), gi v cross-arm with top bracket including clamp(2 nos), 11 kv gapless surge arrestor,9 kv ,10 ka ,la with polymer housing, stn. type, 11kv go, ab switch 3-phase, 3-pole, 200 amp, vertical type, 11 kv horn gap fuse set 3 phase 200a, 11 kv heavy duty link set (polymer) line type with 6mm copper blade and 02 no. 8ft. gi channel, clamps and nuts and bolts, 11 kv pin insulators (polymer/porcelain) with pins(5kn), 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, lt shackle with mukhi clamps including gi nuts & bolts, gi nuts & bolts of sizes with full thread, manilla rope, gi wire 8 swg, suspension/tension clamp with eye hook as per kpdcl standards, insulating piercing connector (10-95sqmm), straight through cable jointing kit for 35/50sqmm ltab, straight through cable jointing kit for 75/95/120sqmm ltab, heat shrinkable outdoor cable termination kit, 50sqmm lt ab cable (3x50+1x16+1x35) sqmm xlpe (1.1kv, 3+1c, al), 35 mm ab (ht) cable (3x35+1x35 mm ) xlpe, dpc aluminium of sizes 13/14/16/18swg of standard make, super enamelled(se) of sizes 13/14/16/18/21swg of standard make, lathoride paper 10 mil of standard make, exchange of 1kg fresh al dpc by scrap dpc, exchanege of 1 kg fresh bush rods by scrap bush rods, lathoride paper 20 mil of standard make, ht paper 3 mil of standard make, hard card board 1/1.5/2/3mm of standard make, fiber tubes of standard make, cotton tape/ nawar of standard make, cork washers (32x12)5mm, cork washers (50x28)5mm, cork washers (110x74)5mm, cork washers (45x20)5mm, cork washers (60x32)5mm, cork washers (70x45)5mm, cork washers (90x50)5mm, cork sheets(24x36) 3 mm, cork sheets(24x36) 4mm, cork sheets(24x36) 5mm, cork strip(40x3) mm, cork strip(40x5) mm, oil seals for 250kva of standard make, oil seals for 100kva & 63kva of standard make, m seal, cotton tap 1" size (length 35 meter), nawar tap 1 size 35 meter long, tape roll pvc, old saree/doti cloth, insulating gum of standard make, aluminum strip of sizes (3/6, 3/7, 4/8, 4/10 mm etc ) of standard make, rubberized cork sheet 4mm thick, 2 feet *3 feet, rubberized cork sheet 3mm thick, 2 feet *3 feet, ht brown paper 3.0/2.5 mil, packing sheet (1mm)press card board 1/2/3mm, synthetic enamel paint grey colour, varnish dr.beck/empire, glass wool sleeves of sizes, fevicol, backlite tubes 1/2 inch,(1mtr length), packing gutties, electrical grade kraft paper,4mil, rubber washers ( m-12 ht oil seal),, rubber washers ( m-12 lt oil seal),, rubber washers ( m-16 lt oil seal),, rubber washers ( m-20 lt oil seal),, rubber washers ( m-25 lt oil seal),, rubber washers ( m-30 lt oil seal),, fiber glass sleeves 2mm, fiber glass sleeves 3mm, fiber glass sleeves 4mm, fiber glass sleeves 5mm, fiber glass sleeves 6mm, fiber glass sleeves 8mm, fiber glass sleeves 10mm, fiber glass sleeves 12mm, fiber glass sleeves 15mm, oxygen cylinder for welding with water c

Weather Coat Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government / Public Sector

State Government