Latest weigh machine repair Tenders | Government weigh machine repair Tenders

Central Government/Public Sector

CTN :45571803

25 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot miscellaneous scrap - scrap wooden furniture items all sort & size with or without broken condition consisting of almirah, bench wooden with or with out arm, box , chair with or without arm, stool, table with or without drawer, counter for record, bed, rack, batteries box and dressing table etc. with or without mirror ms attachment. ds-8 note- 479372 to 479375 dt.12.06.23, 193651 dt 16.05.23 and 511991 dt 22.05.23.etc. total weight= 2150 kg approx. delivery on actual weight basis. delivery will be given on as is where is basis. cutting allowed for easy loading. lot is approachable by pakka road. bidders are required to visit the lot site for being aware about the site condition/location and satisfy themselves before participating in the e-auction

State Government

CTN :45577262

02 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For supply of cell counter regart , hcl n10 , hb strip , lancet , edta vaccute , esr stand , 10 ml syringe , 20 ml syringe , dustbin , hypochloride solution , coverslip , blood spilage kit , zipper bag , thar mometer , feotal doppler , medicine tray , adut weight scale digital , autoclave , plasti container , table , thermometer , scissor , rack , mucas extractor , suction tube , three fold screen with curtain with stand , bad sheet with pillow cover , handwash , stich scissor , blanket , big sisser , tray with cover , tourch , nasal oxygen set , ryles tube , needle holder , cord cutting scissor , lasour room led light , auto clave drum , iv stand , plastic apron , measure tap , hub cutter with handle , ecg gelly , big sscissor , tissue papper , esr tube , napkin

Central Government/Public Sector

CTN :45548027

20 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : supply of counter weight lb rear as per drg.no. 40033553 alt ac as per specn. misc:717 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45548294

14 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For 1/2 inch sq. drive ratcheting head, max. recommended working torque: 240 ft.-lbs with 340 nm preset torque value. made in single piece aluminium alloy body, preset click type, interchangeable head permit ratcheting accuracy: plus/minus 4% (clockwise), plus/minus 6% (counter-clockwise) from 20% to 100% of full scale with two sockets of size 30mm. maximum weight: - 03 kg. note - calibration certificate to be provided by nabl accredited lab or oem. certificate of genuineness to be furnished at the time of supply by oem/authorised dealer. make - snapon or armstrong or samtool or gedore or similar. [ warranty period: 12 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45567473

24 Jun, 2026 NA

Karimnagar - Telangana

Tender For supply of counter weight eye rod ri no.- sk-588 (1.8 metres) assembly complete set as per rdso drg.no.eti/ohe/sk/588 suitable for 800kg counter weight and as per specn. ti/spc/ohe/fittings /0130 with a_c_slip_no_1, eti-ohe-13 (4-84) may 2018 or latest. make/brand: rdso approved vendors accepted only. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45541213

17 Jun, 2026 NA

Karur - Tamil Nadu

Tender For providing precast counter weight rcc slab for coal conveyors under rsps#2 project area at tnpl unit i

CTN :45525479

06 Jul, 2026 11.85 Lacs

Kamrup - Assam

Tender For establishment of material testing laboratory under o/o the agm(c) design and projects aegcl kahilipara - civil works, compression testing machine (2000kn) with digital reading, automatic pace control with all attachment for testing concrete cube & bricks conforming to indian standards (is: 516, is: 14858) and can also be supplied as per british standards (bs: 1881), astm c-39 with calibration certificate. it should be typically calibrated to class 1 accuracy ( 1%); featuring a robust, fully welded loading unit and hardened, ground, and polished platens, often with a self-aligning upper platen; with display type as pc-controlled with software. it should have pace rate of full three-term pid feedback control with fully automated data acquisition, storage, and analysis. the operation should be fully automated, stress & strain controlled loading., aggregate impact test, crushing value apparatus with hammer weight of 13.75 kg 0.25 kg (or 14 kg 0.5 kg), height of free fall of 380 mm 5 mm, impact cup (mould) inner diameter of 102 mm 0.25 mm and impact cup depth of 50 mm 0.25 mm as per is 2386 (part iv), bs 812-112. automation grade often semi-automatic with a digital counter. display type digital for the blow counter; sometimes includes a digital gauge for other measurements. overall weight (approx.) should be of 45 kg to 60 kg (total machine mass). standards compliance conforms to international standards like is: 2386 (part iv), bs 812-112, etc. , sieves: (40, 20, 10, 4.75, 2.36, 1. 18) mm with lid and pan and (0.6, 0.3, 0. 15, 0.075) with lid and pan (all 200mm diameter size) metal : gi, weighing balance-30kg (accuracy-1gm)., weighing balance-5kg (accuracy-0.1gm)., hot air oven with double walled design, thick glass wool insulation to prevent heat loss, micro processor based auto tune pid digital temp controller cum indicators and 230 volt 50hz single phase ac supply, heavy duty stainless steel lock, indoor hinge and sample placement trays, temp range should be 50 degree c 250 degree c with temp accuracy 0.5 degree c. it should have digital led display of size 45 cm x 45 cm x 45 cm (inner)., cube mould (cast iron) of size 150mmx150mmx150mm, isi marked as per is:10086. weight of the mould will be about 13.5 kg, strictly as per bis specifications and within required tolerance., slump cone test apparatus-(isi marked)-with tamping rod (complete set ) as per is: 7320 and is: 1199 part 2, consisting of slump cone, base plate and graduated tamping rod - made of stainless steel., proctor test apparatus with all accessories as per is: 2720 part 8 and is: 10074(1982), complete with base plate and collar., measuring cylinder-borosilicate (1 complete set ) glass of sizes 100 ml, 250 ml, 500 ml and 1000 ml., field density test app-core cutter method ( complete set) complete with core cutter of 100 mm dia x 130 mm long with chromium plating, dolly for 100 mm dia core cutter, and rammer with steel rod as per is : 2720, rebound hammer digital (original/silver schmidt type n) with calibration certificate as per is 516 part 5, sec 4 with impact energy of 2.207 nm (1.63 ft-lbf), concrete strength range of 10 100 mpa (1450 14500 psi) and weight of 570 g (1.3 lb) with display as graphic lcd (e.g., 17x71 pixels) or analog/digital and battery life: >5000 impacts., ultrasonic pulse velocity test apparatus (proceq, acoustic control systems, vedantrik technologies) with calibration certificate and frequency range of 24 500 khz (nominal transducer); measurement resolution of 0.1 s (microseconds); pulse voltage ranging from 125 v to 500 v (adjustable); receiver gain of 1x, 10x, 100x, auto, up to 1000x (lab+ model); pulse shape as square wave; measurement modes as pulse velocity, surface velocity, e-modulus, compressive strength correlation, crack depth; memory which stores >500 measured values; display should be 79x21 mm passive matrix oled; connectivity through usb for pc connection; software: pundit link for analysis and export. standards compliance

State Government

CTN :45510359

24 Jun, 2026 16.69 Lacs

Ahmedabad - Gujarat

Tender For replacement of wire rope with rope clamp by new one in total 3 no`s automatic gate and locking of 3 no`s automatic gate, providing and fitting rubber sheet support below steel type counter weight in total 27 nos gate, repairing work of guide track and track plate in total 27 nos automatic gate. fabrication, supplying and erection work of new entrance gate on both entrance and exit side of dam in order to allow authorized person to enter on dam gate and fabrication, supplying and erection work of railing with entrance gate on r.b.h.r gate and other miscellaneous repairing work of automatic gates of size 36` x 05`- 47 nos and h.r. gates of ranghola irr. scheme. as per the drawings, specifications and instructions of the engineer-in-charge. (dist- bhavnagar)

State Government

CTN :45317543

15 Jun, 2026 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ytps-supply of gravimetric feeder spares for hp1103 bowl mill in boiler -ii division. - calibration roller complete assembly, bearing housing,inlet spanroller, bearing housing,weigh spanroller, bearing housing, calibration roller, grease sealfor belt takeup pulley for inlet, weigh span roller grease seal for inlet, grease seal for calibrating for inlet, tension roll grease seal for inlet, wear sleeve belt take up for inlet, tension roll wear sleeve for inlet, drag ling assembly for inlet, bolt for drag ling, bolt for belt takeup rail support for inlet, weigh span roller pre loading washer for inlet, bolt forweigh module, tension roll pivot bolt for inlet, bearing housing-ii for weigh span rollers, retainer ring for calio shaftfor inlet, weigh span roller retainini ring for inlet, tension roll retainer ring for inlet, inlet span roller retainer ring for inlet, weigh span roller hanger rod, ring,retaining, block belt takeup for inlet, belt takeup pulley assy shaft for inlet, inlet skirt (rh) for inlet, inlet skirt (lh), end skirt for inlet, levelling bar for inlet, head pulley wear sleeve, bulls eye glass for inlet, shear pin for coc shaft, coal on belt padoie for inlet, coal on belt grease seal for inlet, oil seal, 70x85x8 mm, counter weight,of weighsensing system

CTN :45476070

15 Jun, 2026 2.37 Crore

Saharanpur - Uttar Pradesh

Tender For audyanik proyog avam prashikshan kendra saharanpur mein nirmaanadhin shahad utkrishthta kendra se sambandhit machinery or parts ki apoorti or establishment ka karya - supply & installation of automatic honey bottling filling machine with sensor based calibrator including with filling range (50 grams to 1000 grams), outout/min (any size within range 3000 to 5000 bpd), filling system (pneumatic vmp system synchronize with servo motor), direction of movement (left to right), number of head/syringe (single), drop controller (y- pneumatic stopper), calibration of machine (automatic with sensor), inlet material stopper (fg valve), feed tank (direct connected), feed tank overflow controller (float type), material feed in m-tank (automatic), heating arrangement in m-tank (water bath system), material shaker in m-tank (electrical shaker), bath temperature & material temperture monitoring system (full auto-control with ccp), electric spply (230 cm v/50hz), tempreture controller (pid), machine dimensions (250 cm x 100 cm x 210 cm (approx) and net weight (300 kg). etc all complete with isi marked., supply & installation of automatic linear capping machine including with output/hour (any size with range 4000 bpd), direction of movement (left to right ), machine dimensions (180 cm l x 90 cm w x 170 cm h (approx)), sensor (panasonic), pneumatic accessories (spac) and no bottle- no cap (yes). etc all complete with isi marked., supply & installation of automatic round bottle sticker labelling machine including with output/hour (10000 bpd), direction of movement (left to right), controlling (micro controller base mm interface), conveyor motor (0.25 hp/415 v/ 50 hz), pressing device motor (60 watt / 220 v/ 50 hz), servo motor (750 watt), label accuracy (+/-1mm), gap sensor (u-type), bottle spacer (electronic), variable speed (40 bpm-max), hmi & plc (7 inch coloured touch pad type), pneumatic (spac), pressure roller (sillicon), adjustment (lead screw), label size (up to 100 mm width), bottle dia (up to 120 mm dia), batch counter (yes) and online data indication (yes) etc. all complete with isi marked., supply & installation of air compressor including with type (reciprocating), tank volume (250 ltr), pressure range (10 kg/ cm 2), no of head-(02 nos.), type (industrial) and operation (continue) etc. all complete with isi marked., supply & installation of induction sealing including with automatic induction sealing machine etc. all complete with isi marked., supply & installation of turn table including with 750 mm dia turn table moc ss304, motor - 0.5 hp/440 vac, vfd - invt/delta and model -cgmp etc. all complete with isi marked., supply & installation of packing conveyor including with 10 feet long packing coveyor, width of conveyor 300 mm, motor - 0.5 hp/440 vac and model - cgmp etc. all complete with isi marked., supply & installation of auto honey feed pump including with automatic honey feed system for filling machine from plant etc. all complete with isi marked., supply & installation of bottle washing machine including with automatic bottle cleaning machine tilting action type etc. all complete with isi marked., supply & installation of particle inspection table including with online particle checker etc. all complete with isi marked., supply & installation of online printer including with online ink jet printer etc. all complete with isi marked., supply & installation of slate chain conveyor including with ss304 slate chain conveyor, motor - 0.5 hpx 3 nos, vfd - 3 nos and guider - as per design etc. all complete with isi marked., supply & installation of automatic wax sheet foundation mill including with sheet making roller set (cell size 5.4 mm, length ,600 mm, dia 200 mm), cold water circulation system 0.5 hp, conveyor belt length - 300 mm, sheet cutting system, water cooling system 1.5 - ton cap, wax malting tank, wax filtration system, ss tray, ss bucket, operation by hmi, dat

Weigh Machine Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors