Latest weigh bridge foundation Tenders | Government weigh bridge foundation Tenders

Central Government/Public Sector

CTN :41626668

08 Sep, 2025 NA

Puruliya - West Bengal

Tender For supply of vis for bfp foundation for raghunathpur d d - mdbfp foundation , tdbfp foundation , frame for pre- stressing, hydraulic jack system,electric pump, high pressure tubes, manifold, lifting hook, packing plates, supporting stool, steel shims etc , hydraulic jack system and hand operated pump , travel to site from outstation and return after completion of work , supervision at site including boarding, lodging, local conveyance etc all complete

State Government

CTN :41624547

12 Sep, 2025 20.14 Lacs

Multi City - Karnataka

Tender For dismantling the existing cooling water pump motor sets along with concrete bed. all the civil works like removing the priming pipes cement bedding, concrete foundations of pump motor sets at el 166 ft. turbine floor concrete foundation bedding works with suitable packets / opening for motor foundation bolts and pump foundation bolts and fabrication of metal frame structure for erection of motor as per detailed approved drawings of pump motor sets, leveling, curing etc. has to be carried out by contractor. supply and erection of new motors and kpcl issued pump, leveling proper alignment on concrete bedding to match the existing old suction and delivery pipes flanges with hardware, gaskets height of centerline of pump suction nozzle and delivery nozzle should match the existing suction pipe flanges and delivery pipe flanges centerline from foundation. necessary pipes, flanges, bends, gaskets, hardware for retrofitting works and gas cuttings, welding, flanges holes drilling if any should be carried out by the contractor. necessary gas cutting, nozzles, gas welding machines, welding rods concrete drilling / chipping tools other tools, tackles, chain pulley, pull lifts, terfers, cement, sand strengthening work of concrete with skilled technicians to be carried out. local transportation for transporting men and material to site to be arranged by contractor. all other works of erection, testing and commissioning as per site engineers directions should be carried out by the contractor as specified in detailed technical specification and scope of work furnished in section-iii- of bid document attached in the e portal.

Central Government/Public Sector

CTN :41676635

15 Sep, 2025 2.46 Lacs

Angul - Odisha

Tender For demolishing of damaged concrete rcc base, dismantling of m.s foundation frame and casting of new concrete rcc base with fabrication of new m.s foundation frame for pump-motor no-3 of phase-ii along with anticorrosive painting of all foundation frame

CTN :41622290

18 Sep, 2025 20.00 Lacs

Poonch - Jammu And Kashmir

Tender For supply of excavation of earth , lean concrete for foundation , reinforcement tmt bar for foundation , ms plate for base and top qty 36 , nut and bolt with washer with fixing in rcc pillar , ms pipe heavy duty with gusset plate qty 18 , ms channel 75mm wide used for vertical portion , pp galvanized sheets including ridge , foundation , steel roof truss qty 08 truss , pp weld mesh , aluminum glass slider windows with mesh , steel door with frame , led flood lights with ancillaries including cabling, mcb with box etc , two coats of synthetic enamel over one coat of red oxide primer

corporations/Associations/Others

CTN :41508588

03 Oct, 2025 9.77 Crore

Pune - Maharashtra

Tender For request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm consisting of m

corporations/Associations/Others

CTN :41537428

08 Sep, 2025 8.80 Lacs

Salem - Tamil Nadu

Tender For providing foundation plinth for transformer a frame and cooler bank pedestals with allied civil works for additional 1 no. 100 mva 230/110 kv auto transformer in vinnamangalam 230 /10 kv ss

CTN :41668859

23 Sep, 2025 NA

Multi City - Multi State

Tender For construction of green house at dbo d d - stone aggregate single size 20 mm nominal size , coarse sand zone iii , portland cement 0.2225 cum , cement concrete block 40 cm by 30 cm by 20 cm , rr stone , ms pipe ms square tube ms tee ms foundation bolts 16 sqmm dia ms flat , acrylic exterior paint , acrylic exterior primer , painting brush 6 inch 5 inch and 4 inch , ready mixed pink or grey primer , synthetic enamel paint , 60 mm puf pannel for roof with 0.50 mm thick ppgi ribbed sheet on both sides with layer of rigid cfc free polyurethane foam of density 40 kg plus minus 2kg cum as insulation in between. , 6mm thick polycorbonate sheet on roofing , iron cutter bladge 100mm , iron cutter bladge 300mm , welding rod , self drilling screw 40mm , 1 mm thick ms sheet steel door shutter with frame of 44x40x6 mm ms angle of size 0.90 x 2.10m including ms sliding door bolt and tower bolt ) /bid number : gem/2025/b/6634053 * /dated: 01-09-2025 & & / bid document 1 / 19

CTN :41655760

22 Sep, 2025 NA

Dibrugarh - Assam

Tender For construction of special heliborne operation platform - ms frame structure work , raft foundation for slithering platform , painting for steel structure , labour and welding staff or climbing wall , technical equipment , climbing wall panel

CTN :41519449

04 Sep, 2025 NA

Pithoragarh - Uttarakhand

Tender For bid to ras supply of supply of complete structural and contruction material for medical shelter d d - hybrid core insulated fireproof sandwich ceiling panels in min 1100mm width , roof 0 point 60 mm thick ppgi sheet approved colour fixed with self tapping screws over steel purlins , ridge cover 0 point 60 mm thick pre coated corrugated sheet of approved colour matching with the roof sheet of size and design and 3m long and 900 mm wide , wind ties 12000mm long wind ties of 40 x 5mm ms flat on each side of roof will be provided and shall be secured adequately to purlins with self tapping screws and steel and bitumen washers and bolts , door of size 900mm x 2000mm made of powder coated aluminium frame , pvc doors factory made pvc moulded door shutter 30mm thick of size 750 x 1900mm , window powder coated aluminum two track sliding window of size 1200 x 1200 mm with 02 nos of glass shutter and stainless steel fly proof mesh and outside aluminium grill shall be provided , aluminum ventilator powder coated aluminum ventilator fix type of size 900 x 450 mm with stainless steel fly proof mesh shall be provided , acrylic sheet fixed aluminum frame with 6mm thick acrylic sheet glazing 900mm wide will be provided along the entire length of the verandah , sunshade a sunshade of size 1500mm x 500mm for external windows will have iron frame for fixing it to the shelter wall , sunshade b sunshade of size 1200mm x 500mm for external door and ventilatorss will have iron frame for fixing it to the shelter wall , foundation bolt 25mm dia 750mm long welded with top and bottom anchor plate of size 250 x 250 x 10mm and fixed with bottom base plate of column using nuts and bolts , nut bolt of size 12mm dia 75mm long with washer , nut bolt of size 12mm dia 125mm long with washer , nut bolt of size 12mm dia 150mm long with washer , rivet full size , self tapping screw 100 mm long , self tapping screw 75 mm long , star screw 15mm long , star screw 25 mm long , star screw 75mm long , water tank with staging 02 nos of hdpe 500 ltr capacity water tank and 01 nos of staging 3 point 20 mtr height which will be made with ms angle iron , ewc vitreous china wash down water closet cascade type with flushing cistern , wash hand basin vitreous china wash hand basin pedestal type angle back white flat back pedestal pype , bathroom cabinet ptmt cabinet with looking mirror for toiletry items of size 330mm x 140mm x 530mm with arrangements to fix the same with wall , ss soap dish holder , cp towel rail 24 mm dia and 600 mm long with fixing fixing arrangement , stainless steel grating 100mm dia isi marked , stainless steel grating whith hole for waste pipe of whb , cp bib cock 15mm bore long body , cp pillar tap 15 mm bore , cp angle valve chromium plated steel 15 mm bore , cp stop cock chromium plated steel 15mm bore , chromium plated shower rose 100 mm dia , pvc p trap 110mm dia , pvc floor trap 110mm dia , pvc elbow 110mm dia 90 degree angle , pvc elbow 110mm dia 45 degree angle , pvc tee 110mm dia , pvc socket 110mm dia , pvc pipe 75mm dia , ppr pipe 32mm dia and 3 layer pn 16 oblique sdr 7 point 4 , ppr elbow 32mm , ppr tee 32mm , ppr socket 32mm , ppr union 32mm , ppr reducer socket 32 x 20mm , ppr reducer tee 32 x 20mm , ppr reducer elbow 32 x 20mm , ppr tank connector 32mm , ppr gate valve 32mm , ppr pipe 20mm dia and 3 layer , ppr elbow 20mm , ppr threaded elbow 20mm , ppr tee 20mm , ppr threaded tee 20mm , ppr socket 20mm , ppr threaded socket 20mm , steel connection 600mm long with brass check nuts and rubber washers for gyzer , pvc connection 600mm long with brass check nuts and rubber washers for bain and flush //bid details 2 / 94 cistern , pvc solvent cement , teflon tape 12mm wide and 10 mtr long , cgi sheet 3000 x 900 x 0 point 60mm of isi mark , gi pipe 2400mm long and 50 mm dia and 1 point 5mm thick , 20 watt led tube light fitting and 230v with electronic ballasts and holder and connector and block etc , auto rechargable led bulb18 w with modular l

CTN :40974067

03 Sep, 2025 NA

Vadodara - Gujarat

Tender For bid to ras est of hyd trg lab with integrated facility for hyd system - puf panel sheet, both side 0.40mm ppg sheet, colour white ral 9002, pud density: 04 kgm3, panel joint : overlapped, thickness 50mm with installation, aluminium sliding door (6 ft width x 7 ft height), aluminium section (1.2 mm thick black powder coated section) with 5 mm thick bakelite sheet and 5mm thick black semi-transparent glass (saint gobin), grid ceiling with 2'x2' grid distance, epoxy coating on floor & colour: blue, necessary electric point (wire: r.r cable & switch:, anchor, 1) ac points, ii) fan points (wall mount), iii) 15 amp points, iv) 05 amp points, v) main junction box with mcb, vi) led light points, led lights 2'x2' (syska/crompton/ panasonic) 36w, split acs 1.5 ton (lloyd), 3-star inverter, work table with fabricated of ms pipe with plywood with 3 drawers duly powder coated size:4' x 3', work table with fabricated of ms pipe with top plywood with 5mm rubber sheet 3 drawers powder coated, size:6' x 4', fabrication frame work with ms pole and perlin with black oil paint (10ft height with necessary structure) and r.c.c in foundation., shed over fabrication work of ceiling (0.5mm jindal), colour: white, bty operated crane 5 ton, i) lifting capacity - 5 ton, ii) lifting hight-500mm, iii) lower hight-500 mm, iv) safety features- self braking sys, v) usage indoor, portable & shop floor, vi) total boom length- 1200mm

Weigh Bridge Foundation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others