Latest welding equipment sale Tenders | Government welding equipment sale Tenders

CTN :42847474

19 Dec, 2025 NA

Chandigarh - Chandigarh

Tender For corrigendum : purchase of raw material to be supplied at various jails in state of punjab. - ply board of size 6 x3 (19mm), ply board of size 8 x4 (19mm), sunmica (brown) (plain) of size 8 x4 (1mm), ply of size 8 x4 (6 mm), adhesive fevicol sh, round pipe of size 1 x1 -16 g, square pipe of size 1 x1 -16 g, concentrate phenyl, plastic cane (double), welding rod 10 no., cotton yarn (open end) (pl grade) of size 14 s, cotton yarn (open end) (pl grade) of size 2/20 s, cotton yarn (open end) (pl grade) of size 6 s, cotton yarn (open end) (pl grade) of size 4/6 s, soap stone, pam fatty, rice fatty, sodium silicate, woollen acrylic 2/32 daffodil colour maroon, woollen acrylic 2/32 daffodil colour grey, fiber sheet of size 6 x 25

CTN :43149213

22 Dec, 2025 NA

Bokaro - Jharkhand

Tender For repairing of lhs and rhs brake drum replacement from serviceable assly, removing blade stabilizer rod broken bolt material filling and fitting new bolt 4 nos. as per size with welding supporting plate of dozer sl. no. t-11971 of konar expansion, bnk.

State Government

CTN :43145347

17 Dec, 2025 9.51 Lacs

Delhi - Delhi

Tender For providing and installing open gym equipments with buy back of old gym equipments at district park at dilshad garden (link chain) (specialized work). - schedule -a , air walker: providing, designing and fixing of air-walker of size 1100x550x 1480 mm fabricated with main post of 114 mm dia and 2.5 mm thick and other pipes of 40 mm dia 2.5 mm thic made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pie to be closed with gi /lldpe caps, base plate cover shall be made of virgin lldpe plastic by rotational molding with minimum 8 mm thickness, uv resistant and colour as approved by engineer-in-charge. high quality grip rubber should be sued on handles. foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and pedal and fixing of equipment etc. ., sit up station: providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40 mm dia and 2.5 thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8 mm, colorful and uv resistant and environmental friendly. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal seat and base pedal and fixing of equipments etc. ., air swing: providing, designing and fixing of air swing in pair of size 1150x900x1250 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 8 mm, colorful and uv resistant and environment friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrets is set, f

State Government

CTN :43145348

17 Dec, 2025 27.18 Lacs

Delhi - Delhi

Tender For providing and installing open gym equipments with buy back of old gym equipments in all the 6 parks as mentioned in the schedule.(specialized work). - schedule -a , air walker: providing, designing and fixing of air-walker of size 1100x550x 1480 mm fabricated with main post of 114 mm dia and 2.5 mm thick and other pipes of 40 mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pie to be closed with gi /lldpe caps, base plate cover shall be made of virgin lldpe plastic by rotational molding with minimum 8 mm thickness, uv resistant and colour as approved by engineer-in-charge. high quality grip rubber should be sued on handles. foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and pedal and fixing of equipment etc. (demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately)., sit up station: providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40 mm dia and 2.5 thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8 mm, colorful and uv resistant and environmental friendly. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal seat and base pedal and fixing of equipments etc. (demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately)., air swing: providing, designing and fixing of air swing in pair of size 1150x900x1250 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 8 mm, colorful and uv resistant and environment friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to

corporations/Associations/Others

CTN :43142744

16 Dec, 2025 7.54 Lacs

Multi City - Andhra Pradesh

Tender For supply, delivery of spare parts, repair foundry work for ex-200 proclainer machine, including replacement of chassis and track repairs.(rc.v1-121009/2025) - track frame- chasis r/f, service engineer mechanic charges, foundry & labour charges, bucket repair with material & welding, boom main pin, boom cylinder pins, boom stick joint pin, arm cylinder top pin, arm cylinder bottom pin, bucket pin bush, bucket pins, connector pin big, connector pin small, connector bush big, connector bush small, boom main bush, boom cylinder bush, boom stick join pin bush, boomn cylinder top & bottom bush, arm cylinder top & bottom bush, track bottom rollars, crane charges chasis lifting & fixing

State Government

CTN :42334379

22 Dec, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco - nshes - supply of certain consumables at nshes, nagarjunasagar. - fevicol sr-998 1kg, bearing grease, 1kg, molykote br2 plus, rustolene (in 1 litre cans), bearings grease of servo make (in 10 kg pack), asbestos cloth, 3mm thick, 1 mtr width, welding helments sigma brand, brush, paint. size:50 mm., length:2 inch, brush,paint, size:75 mm., length:3 inch, wire brushes, 5 rows, goggle: type:grinding, rod nylon, 20mm thick, pvc dotted cotton hand gloves, pressure gauge, 0-15kgf/cm2,4 inch, 3/8 inch bsp, teflon tape size: 12.5x12mtrs. x0.075mm, cutting wheels ag4, grinding wheel ag4, wheel, buffing, sponge, 6 inch x 3.5 inch x 2 inch, abrasive cloth, type:rough, material:emery, grit-36, size: 9 inch x 11 inch, abrasive, cloth, type:smooth, material:emery, grit-100, size: 9 inch x 11 inch, braided pvc flexible hose for air, id:12.5 mm, working pressure: 7.5 kg/cm2, nylon braided rubber hose,id-24mm,od-34mm, working pressure 15kg/sqcm, oxygen regulator, two stage with two gauges, make: esab, acetylene regulators, 2 stage with 2 guage, make: esab, neoprene rubber chord 10 mm dia, rechargeable torch light, 30watt, model:digi led dl30, make: eveready, nylon cable ties, size: 400 mm, tie, cable, nylon, size: 300mm, tie, cable, nylon, size: 250mm, tie, cable, nylon, size: 200mm, tie cable, nylon, size: 150mm, tie cable, nylon, size: 100mm, terminal block, porcelian, 2pin,6a, terminal block, plastic, 2pin,6a, copper lug, 1.5sqmm, rectangular-pin type, with ins sleeve, copper lug, 1.5sqmm, fork type, with ins sleeve, for 4mm stud, copper lug, 1.5sqmm, ring type, with ins sleeve, for 6mm stud, copper lug, 2.5sqmm, rectangular-pin type, with ins sleeve, copper lug, 2.5sqmm, fork type, with ins sleeve, for 6mm stud, copper lug, 2.5sqmm, fork type, with ins sleeve, for 4mm stud, lug,copper, 2.5sqmm, ring, pre insulated, double grip6mm, copper lug, 2.5sqmm, ring type, with ins sleeve, for 10mm stud, copper lug, 2.5sqmm, ring type, with ins sleeve, for 4mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 10mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 8mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 6mm stud, tape, electrical, type:insulation, material:pvc, color:red, width: 18mm, length: 7 mtr, tape, electrical, type:insulation, material:pvc, color:yellow, width: 18mm, length: 7 mtr, tape, electrical, type:insulation, material:pvc, color:blue, width: 18mm, length: 7 mtr, tape, electrical, type insulation, material:pvc, color:black, width: 18mm, length: 7 mtr, bolt,w/nut, spring and flat washer, ht gr. 10.9, m20x98 mm, half thread, bolt,w/ nut and sprig washer, ht gr. 10.9, m20x60 mm,full thread, bolt w/nut and spring and flat washer, ht gr. 10.9 m16x70 mm, full thread, bolt.w/nut and spring and flat washer, ht gr. 10.9 m16x45 mm, full thread, bolt,w/nut and spring and flat washer ht gr. 10.9. m12x40mm,full thread., bolt w/ nut and spring and flat washer, m20x80 mm, ht gr.10.9, half thread, dye penetrant testing (dpt) kit containing cleaner, penetrant and developer, pack of 03 nos., chloroprene rubber o-ring cord. dia:6 mm, length: 10 mtr., chloroprene rubber o-ring cord, dia:8 mm, length: 10 mtr., fuse hrc 32a, 500v ac, din, s-00, make: siemens, fuse hrc 63a,500v ac, din, s-00, make: siemens, fuse, hrc, 200a, 500v ac, din, s-00 make: siemens, terminal block, bakelite, 2 way,6a 230v, terminal block bakelite 3 way 16a 415v, terminal block bakelite 4 way 30a 415v, terminal block, porcelian 3 way,164,415v, nylon rope diameter: 12mm, colour: yellow/white type: braided, length: 100 meters roll, gas cutting hose (red). (1 no may be read as 1 meter), gas cutting hose blue (1 no, may be read as 1 meter), socket countersunk head cap screw, m8x20 mm. allenkey size: 5mm make: unbrako (part no. 103340)

Central Government/Public Sector

CTN :42972845

15 Dec, 2025 NA

Haridwar - Uttarakhand

Tender For corrigendum : tender for item description: complete machining, welding, assembly (as applicable) and coating (as applicable) of dabg items with bhel material, as per drg and technical requirements. - housing, cylinder, ctwt, w/m

Central Government/Public Sector

CTN :43127526

31 Dec, 2025 NA

Katipala - Karnataka

Tender For custom bid for services - tender for annual rate contract for specialized works at mrpl as per boq and scope of work (bidder has to quote lumpsum price higher or lower than the sor value including gst); 1 1057794 providing and laying of 6 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 6mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm+wr+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 2 1057795 providing and laying of 4 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 4mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 3 1057796 providing and laying of 2 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 2mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 4 1057797 providing and laying of 6 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 5 1057798 providing and laying of 4 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 6 1057799 providing and laying of 2 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 7 1057810 supply and laying of 2 mm frp with general purpose glass and resin including primer as per tender and instructions of eic. 8 1057811 joints repair of existing ppg lining with thermoplastic chemical resistant ppg of 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining having tensile strength at yeild not less than 37.59 n/mm2,elongation yield- 25.2%,flexural modulus- 1522.5 n/mm2 and acid and alkaline resistance from ph value 2 to 14 and as per enclosed specification and as directed by eic 9 1016067 supply of thermoplastic chemical resistant ppg of 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining having tensile strength at yeild not less than 37.59 n/mm2,elongation yield- 25.2%,flexural modulus- 1522.5 n/mm2 and acid and alkaline resistance from ph value 2 to 14 and as per enclosed specification and as directed by eic 10 1016068 laying of thermoplastic chemical resistant ppg for 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining including removal of the exisiting lining,joining/welding etc all complete as per enclosed specification and directed by eic. 11 1028194 supply of 5 mm pp/frp prefabricated system where sheet will be of 5mm in black color with u.v. stabilizing agent. along with material for 5 mm thick frp lining (adhesive) i.e. resin, woven roving, csm and special additive(hsn code 70199090). and as directed by eic 12 1028195 laying of 5mm pp/frp prefabricated system where sheet will be of 5mm in black color with u.v. stabilizing agent. along with material for 5 mm thick frp lining (adhesive) i.e. resin, woven roving, csm and special additive(hsn code 70199090) 13 1057812 providing and applying of epoxy putty filling in irregularitie

CTN :42897356

13 Dec, 2025 11.11 Lacs

Multi City - Karnataka

Tender For corrigendum : supplying materials for the construction of village market hut at korlagundi - ks-portland cement, ks-coarse sand (zone iii), ks-mixer (concrete small used in culvert), ks-cudddapah slab 4 cm thick/shahabad/thandur blue, ks-weld mesh 75 x 25 mm of 6g to 10g, ks-ms pipes of 80 mm to 100 mm dia, ks-rms gusset plate, ks-corbon electrodes, ks-welder grade i, ks-hom of welding and grinding machine, ksa-tools and plants at 2 percent on material, ks-ms flat 12 x 75mm, ks-cast iron ornamental design, ks-m.s. square bright bars 20mm, ks-cast iron arrows, ks-expansion bolt, ks-ready mix primer paint (ready mix red lead paint), ks-painter class i, ks-enamel metal paint, ks-dry distemper, ks-whitening, ks-add watering charges at 1 % on material, ks-lime, ks-unit cost as per the specification, ks-cobble stones of 60 mm thick, ks-plate vibrator having 3 ton compaction force, ks-gravel 2.36 mm/murrum, ks-water tanker, ks-vibratory roller 8 tonne, ks-solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm, ks-casurina poles 100 - 150 mm, ks-tmt bars fe 500, ks-binding wire, ks-silver oak or equivalent planks 38 mm thick, ks-casurina poles 75 - 100 mm dia, ks-broken stone aggregate 20 mm size, ks-broken stone aggregate 12 mm to 10 mm size, ks-plasticizer / super plasticizer, ks-mixer (concrete) - 1 cum capacity, ks-hom of vibrator 0.71 days, ks-boulders, ks-size stone 20 x 20 x 25 cms, ks-bond stone 20 x 20 x 45 cm, ks-mechanic class ii/mechanic hmp grade i/eme grade, ks-hom of cutting and grinding machine, ks-rubble stones, ks-broken stone aggregate 40 mm size

CTN :42897350

13 Dec, 2025 8.65 Lacs

Multi City - Karnataka

Tender For corrigendum : supplying materials for construction of godawn at korlagundhi village - kogo-unit cost as per the specification( gi sheet), kogo-ms pipes of 80 mm to 100 mm dia, kogo-rms gusset plate, kogo-corbon electrodes, kogo-welder grade i, kogo-hom of welding and grinding machine, kogo-mechanic class ii/mechanic hmp grade i/eme grade, kogo-hom of cutting and grinding machine, kogo-tools and plants at 2 percent on material, kogo-broken granite metal 12.5 mm, kogo-broken granite metal 10 mm, kogo-coarse sand (zone iii), kogo-portland cement, kogo-mixer (concrete small used in culvert), kogo-red oxide, kogo-add watering charges at 1percent on material, kogo-boulders, kogo-size stone 20 x 20 x 25 cms, kogo-bond stone 20 x 20 x 45 cm, kogo-broken stone aggregate 12 mm to 10 mm size, kogo-plasticizer / super plasticizer, kogo-mixer (concrete) - 1 cum capacity, kogo-broken stone aggregate 20 mm size, kogo-hom of vibrator 0.71 days, kogo-water proofing cement paint, kogo-painter class i, kogo-add providing and removing scaffolding at 3percenton labour, kogo-add handling , loading and unloading at 1percent on material, kogo-dry distemper , kogo-whitening, kogo-add brush, putty, glue at 5percent on cost of paint, kogo-ms sheet 20 gauge, kogo-fitter class i, kogo-ready mix primer paint (ready mix red lead paint), kogo-add handling , loading and unloading at 2percent on material, kogor-add hom of welding and grinding machine at 2percent on material, kogo-18 gauge 75 mm ms laths of 2.8 m length, kogo-side guides, kogo-suspension shaft, kogo-ms side shed clamps, kogo-high tension coil, kogo-ball bearing for rolling shutters, kogo-center pully, kogo-locking arrangments, kogo-ms handles, kogo-bottom lock nail, kogo-aluminium window frame section 1.20 mm thick, kogo-nylon rollers, kogo-rubber beading for shutters beading, kogo-pvc edge beading, kogo-alluminium tower bolt - 20 cm, kogo-alluminium handles - 15 mm, kogo-cleat angles, kogo-chrominum plated screws, kogo-5.50 mm thick plain glass, kogo-fabricator, kogo-silver oak or equivalent planks 38 mm thick, kogo-casurina poles 100 - 150 mm, kogo-jungle wood runners and planks, kogo-tmt bars fe 500, kogo-binding wire, kogor-solid concrete blocks (40x20x20 cms)-5.00 n/sqmm

Welding Equipment Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector