Latest welding equipment Tenders | Government welding equipment Tenders

Central Government/Public Sector

CTN :40837596

08 Jul, 2025 14.76 Lacs

Nashik - Maharashtra

Tender For procurement of hvac items components and accessories at acem under emu r and d nasik - d scaling for chemical, chemical, top up the gas in the refrigent working/non-functional units after pressure testing, vacuum testing, and leak testing up to required pressure and flow rate to maintain temperature etc. complete of split window/ vrf/ compressor unit of various ratings., providing & supply following field devices as per directions of engineer-in-charge., valve actuator. 50mm, level switch, float valve, thermostat, temperature sensor, pressure gauge, temperature gauge, expansion valve, volt meter, ammeter, selector switch, air dryer, indicator, compressor oil, providing laying, testing & commissioning of c class heavy duty ms pipe conforming to is 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per is 10221, refilling the trench etc. of following sizes complete as required., 80mm, 65mm, 50mm, 40mm, providing & supply following refrigerant copper tube & nitrile insulation as per directions of engineer-in-charge., 1 copper tubes, copper tubes, copper tubes, 3/8 inch copper tubes, providing & supply globe valves as per directions of engineer-in-charge., 125 mm (5"), providing & supply check valves as per directions of engineer-in-charge., 75 mm (3 "), providing, fixing and supply following size y strainers as per directions of engineer-in-charge., 50 mm (2"), 65 mm (2. 1 2 "), providing, fixing and supply following size pot strainers as per directions of engineer-in-charge., 100 mm, providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) :, 25 mm (1"), providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete :, 15 mm, 20 mm, 25 mm, providing and fixing gun metal non- return valve of approved quality (screwed end) as per directions of engineer-in-charge., 65 mm, providing, fixing and supply following electrical accessories as per directions of engineer-in-charge., mccb 100a / 415v / 50hz make and model as per existing system required., mccb 200a / 415v / 50hz make and model as per existing system required., sfu 63a / 415v /50hz fn 63 as per suitable in existing panel, sfu 32a / 415v /50hz fn 32 as per suitable in existing panel, motor protection relay range 0 - 20a/240v/50hz make minilec for existing panel, plc card, three phase monitoring relay, mod motor ll sensor, vfd 3.7 kw motor

State Government

CTN :40835155

15 Jul, 2025 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of automatic and semi automatic welding equipment with self adjusting arcs mig / mag as per is 7931 (part 1, part 2 and part 3) (q2)

State Government

CTN :40838127

01 Jul, 2025 NA

Una-Hp - Himachal Pradesh

Tender For repair and maintenance of ws5 bhanjal under jal shakti section bhanjal sub division daulatpur in tehsil ghanar distt una (hp) (sh:- repair of distribution system of various dia g.i. pipe line, butt welding peet valve etc in wss bhanjal)

Central Government And Public Sector

CTN :40835530

04 Jul, 2025 NA

Surat - Gujarat

Tender For supply of tungsten inert gas (tig) welding equipment as per is 9604:1994 (q2)

Central Government And Public Sector

CTN :40845423

31 Jul, 2025 NA

Multi City - Multi State

Tender For general electrical work for reconditioning of welding plant supply system with provision of welding plant terminal box

CTN :39431350

27 Jun, 2025 NA

Mumbai - Maharashtra

Tender For bid to ras repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; installation of ibs onboard ins brahmaputra; service provider-1. services - bridge- degutting of existing cabling of nav radars manta and bridgemaster (bridge, bridge top, post 23, ops room and flyco) 2000 mtrs, 2. services -degutting of foundation of existing units of navigational radars, bridge master, ecdis, mr 212 and manta (location- bridge, ops room, post 23 and flyco) 1 job, 3. services- degutting of units of bridgemaster radar, manta and ecdis. (location- bridge, ops room, post 23 and flyco) 1 job, 4. services-degutting and removal of bme radar antenna 1 job, 5. services-bridgetop- degutting and removal of nav radar pedestals/ platforms (qty-02) 2 job, 6. services - bridge manufacturing and fitment of all foundations for installation of mfcs (qty -03), mfds (qty03), optical bearing device (obd) (qty-02), integrated captain console (icc) (qty-02), dgps (qty-02) 12 nos, 7. services - bridge - installation of mfcs (qty -03), mfds (qty-03), optical bearing device (obd) (qty-02), integrated captain console (icc) (qty-02), dgps(qty-02) 12 nos, 8. services- ops room manufacturing and fitment of foundations of mfcs (qty -02), mfds (qty-05), integrated captain console (icc) (qty-01) 8 nos, 9. services- ops room - installation of mfcs (qty -02), mfds (qty-05), integrated captain console (icc) (qty-01) 8 nos, 10. services- post 23 manufacturing and fitment of all foundations for installation including vdr (qty -01), acos (qty-01), mccb (qty-01), ups (qty -03), nddu (qty-02), network switch (qty-02), battery bank (qty-01), transformer (qty-02) 13 nos, 11. services- ops room - installation of vdr (qty -01), acos (qty-01), mccb (qty-01), ups (qty -03), nddu (qty-02), network switch (qty-02), battery bank (qty-01), transformer (qty-02) 13 nos, 12. services - bridge wings/bridge top - manufacturing and fitment of all foundations for installation of mfd (qty -02) at bridge wings (port & stbd) and mfd (qty-01) at bridge top 3 nos, 13. services- bridge wings/bridge top - installation of mfd (qty -02) at bridge wings (port & stbd) and mfd (qty-01) at bridge top 3 nos, 14. services- captain s cabin fabrication and fitment of foundations for installation of mfd (qty -02) at captain s day/night cabin 3 nos, 15. services- captain s cabin - installation of mfd (qty -02) at captain s day/night cabin 3 nos, 16. services - renewal of cable trays (60 mm). (provisioning, installation and renewal of old cable tray including hot work). 500 mtrs, 17. services- manufacuring and fitment of cable conduit 60 sq mm at weather deck 1400 mtrs, 18. services- laying and securing of power cables as per schedule. 1000 mtrs, 19. services- laying of data cable i.a.w cable schedule. 3000 mtrs, 20. services- laying of intra compartment cables as per cable schedule indicated 4000 mtrs, 21. service-termination of old/ unused cables by terminating the shield circumferentially and grounding the core at both ends. 1 job, 22. service for -removal of microtech tiling 1 job, 23. services- surface preparation, deck foundation and deck strengthening for installation of ibs units in all compartments including ops room, bridge, flyco, post, 23, bridge wings (port & stbd), bridge top, captains day cabin/ night cabin and mcr preparation/ strengthening as per drawing. 1 job, 24. services- provisioning of all lagging and welding material during degutting and welding of all devices and compartment. 1 job, 25. services- regutting/degutting of lagging and all other associated units viz firemain line, power supply sockets, cables, trunking etc in all affected compartments due to the installation activities as indicated 1 job, 26. services-fitment of securing brackets on deck head to hold /fasten trunking for cooling system 1 job, 27. services-fabrication and fitment of trunking from deck heads to all cables as per cable route 1 job, 28. services- manufacture and fitmen

CTN :39986266

26 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras supply of regutting and degutting of system valves and pipelines - system valves degutting , system valves , valve degutting , degutting with metalic , hot work , system pipes , shifting , system pipes degutting , system valve from shop floor , clamp welding , fitment of gasket , fitment of washer , testing pressure , shop floor , proving the system with air water , transportation from shop floor to onboard

CTN :40468954

01 Jul, 2025 NA

North 24 Paragana - West Bengal

Tender For corrigendum : supply of spot welding equipment for bottom plate sub assembly along with standard accessories and fixture, as

CTN :40826000

15 Jul, 2025 NA

Cooch Behar - West Bengal

Tender For supply of electronics and stationery items-womaniya office accessories, office chair (v3), saras officeaccessories (v3), hunar haat office accessories, paperadhesive, liquid gum and office paste type as per is 2257(rev), emergency lighting and accessories (portableemergency lighting system tower type with acgenset), composite office tables confirming to is 8126(v2), single operator ac and dc arc welding transformersgtaw welding machine as per is 6008, fittings andaccessories for power transformer, drain valve and flangesas per is:3639, fittings and accessories for powertransformer - filter valve and flanges

CTN :40813477

14 Jul, 2025 NA

Sonitpur - Assam

Tender For supply of 15 kva genr set d d - supply installation testing and commisissioning of 40 kva cpcb iv plus compliant genset efficent crdi system 02e series at low emission comma high efficiency engine tech specification , cement 43 grade opc packed in hdpe bag each 50 kg wt conforming to ls 8112 to 1989 make birla gold or ambuja or ultratech or acc or jk or dalmia , coarse sand free from vegitation , coarse aggregate 2omm graded , coarse aggregate 40mm graded , hard core 40 to 63 mm graded , stone for rr masonary less than 6 inch , pre painted galvatume aluminium zinc coating gl based corrugated steel sheet point 50 mm thick an colour having a tensile strength 550 mpa of size 08 feet by 3 feet , ms pipe med grade 50mm dia confirming to ls 1611 to 1998 jindal or tata or sail , painting brush 4 inch lsl marked , anti corrosive red oxide zinc chromate primer confirming to ls 5 to 2004 make berger or asian or nerolac , synthetic paint enamelled og confirming to ls 5 to 2004 make berger or asian , thinner , self driving screw for ppgi sheet 100 nos or pkt , lron welding rod confirming to ls 814 2002 lsl marked 3 point 15mm thick 100 nos or pkt , mcb spn 240 volts 32 amps make havells l and t or standard , mcb sp 6 to 32 amps make havells or l and t standard , pvc tape 19mm wide 5m long make steel grip or anchor or kilinjal , on load change over switch within sheet steel enclosure 100 amps comma 4 pole tpn confirming to ls 13947 parl 3 2607 make havells or standard or l and t , cable pvc insulated electric cables heavy duty1100 volts grade multi stranded copper conductor of size 1 point 5 sqmm single core frls , cable pvc insulated electric cables heavy duty1100 volts grade multi stranded copper conductor of size 2 point 5 sqmm single core frls , wire armored electric power cable heavy duty 1100 volts grade with multi stranded aluminum conductorofsize50 sqm 3 point 5 core comma frls , switch piano 5 amp 230 volts flush type one way snow white make anchor or ssk or cona , switch socket combination snow white multipurpose 2 in 1 comma 15a comma 230v make anchor or ssk or cona , led tuble light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete make havells or bajaj or philips or crompton , screw full thread 6x19 mm lsl marked 200 screw per pkt , pvc switch board snow white of size 7 inch x 4 inch for socket and switches make supreme or polycab or finolex , ceiling rose three terminal snow white make anchor or ssk or cona , pvc round or squire block make polycab or supreme or finolex , distribution box 4 way double door spn 240 volts copper bus bar and neutral link earthing stud conforming to ls 13032 and ls 8623 double doortype make havells or legrand or l and t , service cable pvc insulated aluminium conductor 1100 volt grade heavy duty served with inner sheathing of pvc tap and overall pvc sheathed in service connection 6 sqmm 2 core , earthing plate 600 by 600 by 6mm galvanised sleel suitable for gl strip fitings coma drilled with two nos holes for 6 mm dia near one side , cl earthing pit cover of size 300 by 300 by 6mm with angle iron isa 20 by 20 by 3mm thick ms frame , funnel fitted with 20mm dia gl pipe 1 point 5m long make jindal or tata or kalinga , galvanized lron strip 32 by 6 mm , charcoal , salt normal , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to ls 8112 to 1989 make birla gold or ambuja or ultratech , coarse sand free from vegetation , coarse aggregate 20mm graded //bid details 2 / 29

Welding Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government And Public Sector

Central Government And Public Sector