Latest welding kit Tenders | Government welding kit Tenders

Central Government/Public Sector

CTN :40837596

08 Jul, 2025 14.76 Lacs

Nashik - Maharashtra

Tender For procurement of hvac items components and accessories at acem under emu r and d nasik - d scaling for chemical, chemical, top up the gas in the refrigent working/non-functional units after pressure testing, vacuum testing, and leak testing up to required pressure and flow rate to maintain temperature etc. complete of split window/ vrf/ compressor unit of various ratings., providing & supply following field devices as per directions of engineer-in-charge., valve actuator. 50mm, level switch, float valve, thermostat, temperature sensor, pressure gauge, temperature gauge, expansion valve, volt meter, ammeter, selector switch, air dryer, indicator, compressor oil, providing laying, testing & commissioning of c class heavy duty ms pipe conforming to is 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per is 10221, refilling the trench etc. of following sizes complete as required., 80mm, 65mm, 50mm, 40mm, providing & supply following refrigerant copper tube & nitrile insulation as per directions of engineer-in-charge., 1 copper tubes, copper tubes, copper tubes, 3/8 inch copper tubes, providing & supply globe valves as per directions of engineer-in-charge., 125 mm (5"), providing & supply check valves as per directions of engineer-in-charge., 75 mm (3 "), providing, fixing and supply following size y strainers as per directions of engineer-in-charge., 50 mm (2"), 65 mm (2. 1 2 "), providing, fixing and supply following size pot strainers as per directions of engineer-in-charge., 100 mm, providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) :, 25 mm (1"), providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete :, 15 mm, 20 mm, 25 mm, providing and fixing gun metal non- return valve of approved quality (screwed end) as per directions of engineer-in-charge., 65 mm, providing, fixing and supply following electrical accessories as per directions of engineer-in-charge., mccb 100a / 415v / 50hz make and model as per existing system required., mccb 200a / 415v / 50hz make and model as per existing system required., sfu 63a / 415v /50hz fn 63 as per suitable in existing panel, sfu 32a / 415v /50hz fn 32 as per suitable in existing panel, motor protection relay range 0 - 20a/240v/50hz make minilec for existing panel, plc card, three phase monitoring relay, mod motor ll sensor, vfd 3.7 kw motor

Central Government/Public Sector

CTN :40842288

16 Jul, 2025 5.00 Crore

Lucknow - Uttar Pradesh

Tender For providing of custom bid for services - schedule-a general furnishing of coaches and amenity attention work including carpentry, painting, welding, trimming, plumbing/pipe fitting during maintenance of lhb and icf coaches for primary maintained rakes,custom bid for services - schedule-b general furnishing of coaches and amenity attention work including carpentry, painting, welding, trimming, plumbing/pipe fitting during maintenance of lhb and icf coaches for terminal attention rakes,custom bid for services - schedule-c cost of supply items for mbdp c&w depot as per annexure-ii

Central Government/Public Sector

CTN :40842623

16 Jul, 2025 10.71 Crore

Lucknow - Uttar Pradesh

Tender For providing of custom bid for services - schedule-a general furnishing of coaches and amenity attention work including carpentry, painting, welding, trimming, plumbing/pipe fitting during maintenance of lhb and icf coaches for primary/secondary maintained rakes and..,custom bid for services - schedule-b cost of supply items for bsb c&w depot as per annexure-ii

Central Government/Public Sector

CTN :40837124

15 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of lscn roof assembly to drawing no. 58216001, col i, alt 'n' - 1 no ---- ( 58210045 col.i, alt 'nil' welding pin to be assembled) along with roof end part to drg. no. 58116066, col i, alt 'g' - 2 nos. the firm shall fulfil the requirement as per icf/md/ specn.200 issue status-01,rev.04, amendment no-01 special condition : schedule a- (to be deli vered to shell) complete roof assembly to be supplied with welding pins welded to roof a ssembly as per drawing. schedule b- (to be delivered to fur) cap to drg no 49516008002, alt 'a' and serrated spring washer to drg no 49516008003, alt 'a' of required quantity as per drawi ng are to be packed in suitable polythene bags of 100 microns thickness with printed label with compl ete details kept inside the polythene bags. (complete details: 1. item description, 2. qty in the packi ng, 3. date of packing, 4. po no., 5. type of coach, 6. vendors name & address) "polythene bags t o be sealed properly to prevent moisture and water entry". - all the items to be supplie d in coach sets only. - packing as per icf/j&t/misc-2627, alt 'b'. [safety item ]

Central Government/Public Sector

CTN :40762589

30 Jun, 2025 NA

Lakshadweep - Lakshadweep

Tender For corrigendum : providing an alternate berthing arrangement (by using pontoon) to facilitate landing for tourists at aberdeen jetty near rajeev gandhi statue, rgws complex, sri vijaya puram, a and n islands. - shifting / towing of one number 100 ton cap. steel pontoon (size: 20mx9mx2m) from pbhc to aberdeen jetty (rgws) complex by suitable motor vessel and anchoring/positioning at the location as directed by the eic, including the cost of ropes and other required materials etc.., lashing charges,completing all port formalities,labour charges,transit insurance, all taxes and duties, gst, port dues, minor tools and plants, lwc etc. complete., fabrication of various component and fittings for pontoon jetty, the work including cutting and welding of steel strucutres for fabrications work by using various sizes of m.s rods, m.s.angles, m.s.channels, t-frame, seamless pipe schedule 80 pipes for bollards etc. as per the instructions of eic. removing all the dust and scales from the newly fabricated steel sections and applying one coat of synchromate primer of approved quality. the rate is including cost of different sizes of steel sections, welders/gas cutters, fitters, semi skilled labours, unskilled labours, painters, gas, carbide, welding rods (m/s. irs approved brand), minor tools and plants. hire charges of welding sets, gas plants, cost of primer paint and other consumables required, gst, lwc etc complete., collection of materials required such as c.c.anchor blocks / m.s anchors, chains etc. required in connection with pontoon jetty arrangement and other miscellanous works, loading, transporting, unloading and placing in suitable location as per the direction of eic, including cost of all labour charges for loading and unloading , hire charges of truck, gst, lwc etc. complete., supplying & fixing of chain pulley block 3 ton capacity at existing structure, suitable for lifting the aluminium gangway from the pontoon and lowering the gangway at the pontoon as and when required at aberdeen jetty, other miscellanoeus required, painting with aluminium paint as directed by eic. the rate is including the cost of all labour, materials such as aluminium paint, bolt and nut of various sizes, d shackle 32 mm pin size, wire grips 32 mm, g.i. chain 16 mm for gang way, m.s. hinges, chain pulley 3 ton capacity, pad lock & cardium compound ,gst and lwc etc complete., removing all the scale and rust, de-greasing the surface by pickling in dilute hydrochloric acid and thereafter attending painting to the 100 ton pontoon by applying one coat zinc phosphate primer and thereafter applying two coat high build black paint over the external area above water level area and finish black and deck green paint (marine quality) over the outer shells and deck plate,towing post, bollard etc. the rate is inclusive of all labour charges, paint, painting materials, scaffolding materials, chipping hammer, wire brush and other minor t&p, gst, lwc etc complete. (outer side surface only)., providing and fixing of accessories like old u/s truck tyre fenders all around the pontoon, hanging with g.i chain at suitable position as per the direction of eic. the rate is including cost of u/s truck tyres, transporting, cost of g.i. chain 16mm, d-shackle etc. or any other items required the the work, cost of all labour charges for making holes other minor t&p, gst and lwc etc. complete.

Central Government/Public Sector

CTN :40640555

30 Jun, 2025 NA

Haridwar - Uttarakhand

Tender For corrigendum : complete machining, welding, stress relieving (sr), grinding, induction hardening (ih), nitriding, carburizing, coating (as applicable) and assembly (as applicable) of dabg items

CTN :40840123

23 Jul, 2025 NA

Panchkula - Haryana

Tender For purchase of machinery and equipments (7 m and e items), sector-welding and allied under state schemes required by skill development and industrial training dept.

CTN :40826000

15 Jul, 2025 NA

Cooch Behar - West Bengal

Tender For supply of electronics and stationery items-womaniya office accessories, office chair (v3), saras officeaccessories (v3), hunar haat office accessories, paperadhesive, liquid gum and office paste type as per is 2257(rev), emergency lighting and accessories (portableemergency lighting system tower type with acgenset), composite office tables confirming to is 8126(v2), single operator ac and dc arc welding transformersgtaw welding machine as per is 6008, fittings andaccessories for power transformer, drain valve and flangesas per is:3639, fittings and accessories for powertransformer - filter valve and flanges

CTN :40830467

16 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back shall be electros

CTN :40830509

14 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be operated with aesth

Welding Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector