Latest welding machinery Tenders | Government welding machinery Tenders

CTN :45308055

05 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of push pull rod (traction bar) for wap-7/wag-9 to clw drg.no.1209.01.113.006 alt-5 consists of : 1) flange should be as per clw drg. no.1209.01.113.007 alt-7 2)tube welding as per clw drg. no. 1209.01.313.008 alt-4. 3)traction bar(push pull rod flange hole size should be as per rdso smi no.rdso/2006/el/0241(rev.0) dated 24.10.06 [ warranty period: 30 months after the date of delivery ] ]

CTN :45318064

10 Jun, 2026 NA

Bagpat - Uttar Pradesh

Tender For tender for supply of hardware items -blue paste tube , 15 ml camel make , holdtite , 500gram , grinding wheel ag-4 bosch make , buffing wheel ag-4 bosch make , cutting wheel ag-4 bosch make , angle grinder ag-4 bosch or dewalt make , pather tod tungsten carbide tip , carbon brush for ag-4 grinder , carbon brush for ag-7 grinder , pipe wrench 18 inch , taparia make , pipe wrench 24 inch , taparia make , sly wrench 24 inch , taparia make , hammering spanner size 36 mm , taparia make , chain block capacity 5ton indef make , welding holder , current 600amp , esab make , welding copper lead 35 sqmm , cutting torch , welding safety hand gloves , welding white glass , welding black glass , safety goggles (transparent) , oxygen regulator , lpg regulator , gas cutting nozzle 1/8 inch , gas cutting nozzle 1/16 inch , gas cutting nozzle 1/32 inch , white lead , red lead , emerey paper rough , emerey paper fine , emerey tape fine , graphite powder , hand wire brush 6 inch size , grinding wheel 5 inch bosch make , grinding wheel 7 inch bosch make , cutting wheel 7 inch bosch make , m-seal compound , teflon tape , oxygen rubber hose pipe , red , lpg rubber hose pipe , blue , woolen felt size 1500x4000x16mm (namda) , painting brush 4inch , hose pilpe clamp 1.25inch , rubber star l-75 , lovejoy make , rubber star l-90 , lovejoy make , rubber star l-95 , lovejoy make , rubber star l-100 , lovejoy make , wire braided rubber hose pipe 1inch , pressure- 800psi , temp.-80 to 120 degree c heavy duty , flexible wire braided hose pipe 3/4 inch , (tansperant) pressure- 5kg per sqcm , heavy duty , ms bolt 12x45 mm , full thraed , nylock nut m-12 , split pin m-6x50 mm , split pin m-6x65 mm , metalon pad as per drawing or semple , ms bolt 20x120 mm , halfthraed , nylock nut m-20 , oil seal mykoda/skf no-20-30-10 , oil seal mykoda/skf no-24-42-8 , oil seal mykoda/skf no-30-47-7 , oil seal mykoda/skf no-45-70-8 , oil seal mykoda/skf no-50-70-10 , oil seal mykoda/skf no-50-80-8 , oil seal mykoda/skf no-55-80-8/10 , oil seal mykoda/skf no-60-85-10 , oil seal mykoda/skf no-68-100-10 , oil seal mykoda/skf no-78-100-10 , oil seal mykoda/skf no-65-90-10 , oil seal mykoda/skf no-70-90-10 , oil seal mykoda/skf no-80-100-10 , oil seal mykoda/skf no-75-95-10 , oil seal mykoda/skf no-100-120-13 , oil seal mykoda/skf no-85-100-10 , oil seal mykoda/skf no-85-110-12 , oil seal mykoda/skf no-20-30-10 , oil seal mykoda/skf no-95-120-13 , oil seal mykoda/skf no-100-120-10 , oil seal mykoda/skf no-110-130-13 , oil seal mykoda/skf no-130-160-12/15 , oil seal mykoda/skf no--300-330-15 , hydraulic rubber hose pipe both side flange type -en853/sae100/r1 at , size-3/4inch , length-3 mtr. , max. w.p.-105 bar , 1520 psi make mithra fluidtrans , hydraulic rubber hose pipe both side flange type-1 sn dn16 din 20022 , en853 , sae100 , r1 at , size-5/8inch , length-3 mtr. , max. w.p.-130 bar/1900 psi make polyhose , hydraulic rubber hose pipe both side flange type -sae100 r4-16 , i.d.-1inch , length-1.5 mtr. , max. w.p.-17.2 bar/250 psi make parker markwel , hydraulic rubber hose pipe both side flange type -sae100 r4-32 , i.d.-2inch , length-1.5 mtr. , max. w.p.-10 bar/145 psi make parker markwe , hydraulic rubber hose both side flange type -5 sae100 r4-20 , i.d.-1 1/4inch , length-2.6 mtr. , max. w.p.-13.8 bar/200 psi make parker markwel , hydraulic rubber hose both side flange type -6 sae100 r4-32 , i.d.-2inch , length-2.6 mtr. , max , w.p.-10 bar/145 psi make parker markwel , socket set 1/4 inch drive , 46 pcs set (taparia sa46) , plier 8inch (taparia 1621-8) , pipe wrinch 8inch , pipe wrinch 12inch , slide wrinch 6inch , slide wrinch 10inch , slide wrinch 12inch , ring spanner set mm (6 , 7 to 30 , 32) , d-spanner set mm (6 , 7 to 30 , 32) , wire stripper set , allen key set inch , allen key set mm , nose circlip piler inner , nose circlip piler outer , hexa fram with blade model-hfsa12 size 12inch , screw driver kit (model 802) , long handle screw driver size (300mmx8mm) , cable t

CTN :44968332

26 May, 2026 NA

Asansol - West Bengal

Tender For corrigendum : supply of push pull rod for wag9/wap-7 loco.clw drg no: 1209-01-113-006 alt 6 consisting of (1) flange as per clw's drg no: 1209-01-113-007 alt 8 (2) tube welding as per clw's drg no: 1209-01-313-008 alt 5. specification: confirming to rdso's spec. no.mp.mod.vl-06.38.09 (rev-0) dated 30.11.2009. [ warranty period: 30 months after the date of delivery ]

CTN :45241818

05 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For corrigendum : supply of push pull rod (traction bar) for wap-7/wag-9 to clw drg.no.1209.01.113.006 alt-5 consists of : 1) flange should be as per clw drg. no.1209.01.113.007 alt-7 2)tube welding as per clw drg. no. 1209.01.313.008 alt-4. 3)traction bar(push pull rod flange hole size should be as per rdso smi no.rdso/2006/el/0241(rev.0) dated 24.10.06 [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :43799773

26 May, 2026 NA

Kudankulam - Tamil Nadu

Tender For bid to ras supply of 3 inch slip on flat face flange buttweld with suitable bolts, nuts ,2 washers and gasket , 2.5 inch slip on flat face flange buttweld with suitable bolts, nuts ,2 washers and gasket , 1 inch slip on flat face flange buttweld with suitable bolts, nuts ,2 washers and gasket , 0.5 inch slip on flat face flange buttweld with suitable bolts, nuts ,2 washers and gasket , 4 inch welding neck raised face flange buttweld with suitable bolts,nuts ,2 washers and gasket , 3 slip on raised face flange buttweld with suitable bolts,nuts ,2 washers and gasket. , 2.5 inch slip on raised face flange buttweld with suitable bolts,nuts ,2 washers and gasket .flange should be as per jis b2220-10k , 2.5 inch slip on raised face flange buttweld with suitable bolts, nuts ,2 washers and gasket flange should be as per asme b16.5 class 150

Central Government And Public Sector

CTN :45067005

05 Jun, 2026 NA

Bangalore - Karnataka

Tender For high pressure hi-impulse sae 100r2 a 1-1/4" bore hose assembled with 2 hose fittings-1 sae 90 deg split flange, 2" flange head & 1 sae 45 deg split flange, 2" flange head swivel nut,angles of end fitting in same direction make:parker/manuli/gates/ aeroquip make only overall length - 3250 mm. note - 1. 90 degrees & 45 degrees and straight hose end flanges shall be of single piece without any welding/brazing. 2. hoses should be suitable for high pressure and high impulse application 3.miniumu warranty of one year shall be given for the total hose assembly by the supplier from the date of supply. [ warranty period: 12 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45242153

10 Jun, 2026 NA

Hyderabad - Telangana

Tender For auction sale of scrap used bearings,cast iron scrap wheel disc,empty plastic bucket 10 ltr cap,scrap televisions w/picture tubes,power hacksaw machine w/o motr - small,copper ally scrap - electwire,pinion for crown wheel,steel metling scrap back and face plate,power invertors,scrap hitch 2 seater asst w/cush,alucable wire,injector scrap w/out nozzels,can plastic 20ltr,steel scrap - fiploose parts,alu scrap pisiton,steel scrap air pre guage wall typ,cast iron scrap - sprbra and shalinks,scrap celling fan w /blades,iron scrap ms turing boring w/b,u/s small lcd television,steel scrap - flange companion,cylinder heads,scrap computer equipment/ups,aluminium scrap - fip all types,ciscrap - engine blocks all types,air compressor - bus,scrap arc/mig welding machine - big and small,u/s payneer swipe machine,scrap empty barrel - eoil,scrap computer equipments all types,steel scrap - sleeve yokes,transformer oil with barrel,plastic/iron scrap - jnnurm seats,iron scrap - msrubbish,scrap cash chest,scrap leather cash bags and hand gloves,c i scrap - car washing plant parts,copper scrap - copper wire,copper iron scrap - self starter - small and big,numbering machine for rotary

Central Government/Public Sector

CTN :45085874

19 May, 2026 1.72 Lacs

Nagpur - Maharashtra

Tender For corrigendum : providing of custom bid for services - repairing of old and damaged ms pipes of 8inch size welding of cracked portion flange replacement leak rectification etc of makarardhokda 1 ocm

CTN :45177120

23 May, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of supply of three fourth inch ss 304 swm gasket , supply of 1 inch ss 304 swm gasket , supply of 3 inch ss 304 swm gasket , supply of 4 inch ss 304 swm gasket , supply of 6 inch ss 304 swm gasket , supply of 8 inch ss 304 swm gasket , supply of 10 inch ss 304 swm gasket , supply of 12 inch ss 304 swm gasket , supply of 16 inch ss 304 swm gasket , supply of 18 inch ss 304 swm gasket , supply of 20 inch ss 304 swm gasket , supply of 24 inch ss 304 swm gasket , supply of studs and nuts m14 x 75 mm ht , supply of studs and nuts m16 x 100 mm ht , supply of studs and nuts m20 x 120 mm ht , supply of studs and nuts m22 x 120 mm ht , supply of welding electrodes e6013 , supply of pressure gauge 0 to 16 kg per cm2 , supply of pressure gauge 0 to 21 kg per cm2 , supply of thermal safety valve tsv , supply of strainer filter 4 inch , supply of strainer filter 6 inch , supply of strainer filter 8 inch , supply of bearing 7313 skf lnt , supply of bearing 6308 skf lnt , supply of bearing 6307 skf lnt , supply of bearing 7307b skf lnt , supply of bearing 7307b spare , supply of bearing 7313 becbj , supply of bearing 7314 becbj , supply of gi reducer 2 inch x 1 inch , supply of thinner 844 , supply of zinc silicate primer , supply of protecto mastic primer , supply of pu paint , supply of enamel paint , supply of paint remover , supply of paint brush , supply of paint roller , supply of beading u type , supply of beading s type , supply of ptfe sealing tape , supply of white waste cloth , supply of tata safari tubeless tyre , supply of grinding wheel , supply of cutting wheel , supply of buffing wheel , supply of 3 inch ms sorf flange , supply of 4 inch ms sorf flange , supply of 3 inch ms blrf flange , supply of 4 inch ms blrf flange , supply of 1 inch upvc pipe , supply of 1 inch upvc socket , supply of 1 inch upvc elbow , supply of 1 inch upvc union , supply of 2 inch upvc pipe , supply of 2 inch upvc socket , supply of 2 inch upvc elbow , supply of 2 inch upvc union , supply of 2 inch x 1 inch upvc reducer , supply of 1.25 inch foam pickup tube , supply of half inch foam pickup tube , supply of wrapping coating , supply of silica gel , supply of concertina coil , supply of earthing strip 50x6 mm , supply of earthing strip 25x3 mm , supply of nitrogen cylinder , supply of ss worm gear , supply of hose box glass 330x330 mm , supply of ss nut and bolt m10 to m17

CTN :45175502

23 May, 2026 NA

Katipala - Karnataka

Tender For supply of ss 304 tank 4mm plate size , 24in man hole with flange , tank shoe ms steel , 2in ss 304 pipe , 2in flange 150 class , 2in elbow , ss welding , ss pipe cutting , ss pipe laying , tank fixing , excavation , pcc 1 4 8 , rcc m25 , reinforcement steel , foundation bolt gr8 m25 x 0.3 , pipeline painting 3 coat

Welding Machinery Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector