Latest welding portion Tenders | Government welding portion Tenders

CTN :40830467

16 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back shall be electros

CTN :40830509

14 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be operated with aesth

Central Government/Public Sector

CTN :40809805

02 Jul, 2025 NA

Multi City - Multi State

Tender For supply of .welding portion as per drawing no. 60 kg r-260 wirth matching material [ warranty perio d: 30 months after the date of delivery ]

State Government

CTN :40227801

08 Jul, 2025 49.58 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : various routine/preventive and breakdown maintenance work on as and when require basis at chp-gtps - replacement of hammer rings for stage ii crusher , replacement of hammer rings for stage i crusher , replacement of screen plate / breaker plate/kick off plate of stage i and ii crushers , replacement of rotor of stage i crusher with disassembling of removed rotor and assembling of new/repaired rotor , replacement of drive end side bearing / pedestal of crusher rotor or complete gear coupling set of crusher or repositioning of dislocated rotor of crusher , replacement of non drive end side bearing/pedestal of crusher rotor or complete alignment of crusher motor with crusher rotor , replacement of broken hammer rings of stage i and ii crushers (stage i crusher up to 12 nos.of hammer rings and stage ii crusher up to 06 nos. of hammer rings at a time) , replacement of rail of rail table of wagon tipplers 1/2/3/4 (in one side full length) , replacement of clamping rubber pads of clamp for wagon of wagon tipplers , replacement of whole resting pads for wagon of side beam of wagon tipplers , replacement of spill plate roller of wagon tipplers , repairing/preparation/ fitting and replacement of hooks/rods/turn buckle, chain, sling rope ,spring assembly etc. of vibrating trays and crusher house trays , spillage control at various locations , miscellaneous cutting/welding work require at various locations , replacement of gearbox in conveyor no. 2a/b,11a/b,12a/b,13,14/15,16a/b,17a/b ,18a/b,drc/apron/rg/,wagon tipplers,stacker-reclaimer , replacement of gearbox in conveyor no.,5a/b,8a/b,10a/b,shuttle conveyor 1/2,belt feeder 1/2 ,roller screen, mrc 3/4/5,wobbler feeder ,dribble conveyor 1/2 , replacement of slow speed coupling set (two halves) of drive pulley , replacement of coupling bolts and rubber bushes of slow/high speed coupling(input/output coupling ) in conveyor no.2a/b,11a/b,12a/b,13,14/15,16a/b,17 a/b,18a/b,drc/apron/rg/,wagon tipplers,stacker-reclaimer , replacement of coupling bolts and rubber bushes of slow/high speed coupling(input/output coupling ) in conveyor no.,5a/b,8a/b,10a/b,shuttle conveyor 1/2,belt feeder 1/2 ,roller screen, mrc 3/4/5,wobbler feeder ,dribble conveyor 1/2 , replacement/removing/refitting of various size and type of fluid coupling , replacement or removing & refitting of any internal/bearing/input/ output oil seal of various size and type of gear box , overhauling of dismantles old/used gearbox in all respect with fitment of input and output coupling. , replacement of drive pulley , replacement of drive end side bearing of drive pulley or repositioning of dislocated drive pulley , replacement of non drive end side bearing/any side pedestal of conveyor drive/non drive pulley , alignment of motor/ gearbox/drive pulley including decouple/couple of coupling , nut bolt and drive system checking with replacement of broken nut bolt in all 04 wagon tipplers no.1/2/3/4 as per scope , lifting and releasing of gravity take up of any conveyor belt for locking and de locking of belts for other than belt replacement work , loosening and tightening of horizontal type screw take assembly of any conveyor belts for other than belt replacement work , work of dismantling and re erection of new/repaired apron pan from existing apron feeder of wagon tippler , repairing of upper/lower structure/cone plates of damaged/bend apron pan , replacement of carrying roller of apron feeder , replacement of worn out/ damaged ti roller and garland rollers. , replacement of worn out/ damaged impact rollers , replacement of worn out/ damaged return rollers , replacement of various worn out/ damaged ti roller stands , replacement of various worn out/ damaged impact roller stands , replacements of various worn out/ damaged return roller stands , replacement of various worn out skirt rubbers [10 m each] and skirt rubber with angle , preparation and replacement of guide rollers with bracket in place of worn out/ damaged gu

Central Government And Public Sector

CTN :40811163

17 Jul, 2025 NA

Katihar - Bihar

Tender For manufacturing & supplying of at welding portion for 60kg/60e1 r 260 grade rails for using in single shot crucible method and compressed air preheating system of welding under the jurisdiction of sr. den/i/kir.

CTN :40610153

07 Jul, 2025 14.00 Lacs

Kathgodam - Uttarakhand

Tender For corrigendum : supply of small hydro technician tools and equipment d d - allen key set of 12 pieces , box drawing instrument , calliper inside with spring , calliper outside with spring , combination plier insulated , hammer ball peen with handle , hands file for second cut flat , heavy duty screwdriver insulated , knife double bladed electrician , measuring steel tape , philips screw driver set of 5 pieces , pliers combination , protractor celluloid , punch centre , scale card board , scales plotting box wood 6 metric scales , screw driver blade , screwdriver insulated , scriber , set square celluloid , set square transparent , spanner d e set of 12 pieces , spanner ring set of 12 , steel rule , steel rule graduated both in metric and english unit , template architects and builders , t square , adjustable spanner pipe wrench , air ratchet with standard accessories , allen key alloy steel , angle plate adjustable , angle plate size , anvil with stand , bearing puller inside , bearing puller outside , blow lamp brass , c clamp , chisel cold , chisel firmer with wooden handle , chisels cross cut , circlip pliers expanding and contracting 15cm , circlip pliers expanding and contracting 20cm , clamps c 100mm , clamps c 150mm , clamps c 200mm , de metric spanner double ended , dial gauge type 1 gr a , divider , dividers with spring , drift punch copper , drill hand brace , drill point angle gauge , drill s s twist block , engineers square , feeler gauge , file flat , file flat bastard , file flat rough , file flat smooth , file half round , file rasp half round , file round , file half round second cut , file square round , file square second cut , file triangular second cut , files assorted sizes and types including safe edge file , flat file bastard , flat file second cut , gloves for welding , granite surface plate with stand and cover , grease gun , geometrical models wooden or plastic , hacksaw frame , hammer ball peen , hammer chipping , hammer copper with handle , hammer extractor type , hammer mallet , hammer plastic , hand drill machine , hand operated crimping tool , hand reamers adjustable , hand shear universal , hand vice , hand vice , hollow punch set of seven pieces , left cut snips , lifting jack screw , magnifying glass , mallet hard wood , marking out table , oil can , oil pump for dismantling and assembling , out side micrometer , pully puller with 3 legs 150mm , pully puller with 3 legs 300mm , safety belt , smoothing cutters , snip straight , bent heavy duty , spanner adjustable drop forged ss , table vice , thermometer digital , try square , tweezers , calculator scientific nonprogrammable , flexible curves , french curves , land measuring chain , proportional dividers , radius curve metric , steel tape 30 meters long in a leather case , ranging rod wooden fitted , iron shoe , steel arrow wooden peg , wooden mallet hammer , prismatic compass with stand , dumpy level with all accessories , auto level with all accessories , levelling staff telescopic , levelling staff 2 straight pieces , instrument for total station , drill twist assorted , gloves for welding leather , oil testing kit //bid details 2 / 105

CTN :40794454

10 Jul, 2025 NA

Poonch - Jammu And Kashmir

Tender For supply of dustbin , apron , laptop bed table , office chair tan brown leather , doormat , wire gym , lock , hand towel , tray plastic , comb , paint sprayer , lumbar back support , toolkit , welding machine , massager , rotar pump , mosquito badminton , fly catcher , pen stand , customized drone landing gear , door name plate glass background with brass letter , wire 1.5 mm , wire 1.0 mm , tab one plus , dohab , commander flag , rajput flag , logo , citation , bag rest foam , light board

CTN :40768830

10 Jul, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of miscellaneous items for mta - 1 hexa blade 14 2 iron cutter blade isi marked 3 ppgi roof sheet (10x4) 0.63 mm thick 4 bitumen tar felt pbs roll of size 20mtr length, 1mtr wide type 3 grade 1 5 decorative looking mirror 6 stainless steel iwc toilet seat with pvc u trap 7 ss urinal pot 8 ss sink (steel basin) 9 ewc complete set, 10 iwc complete set, 11 flushing cistern 10ltr. 12 urinal pot, 13 waste pipe for urinal 14 stainless steel wash hand basin of size 300mm x 450mm with complete fitting assy 15 lelonium sheet (brown color/wood finish) 2mm thick 16 rubber anti skid shower mat of 4 wide 6mm thick 17 adhesive solution 18 corner self toughened glass with chromium plated steel frame, 19 whb shelf of toughened glass with frame 20 whb mixture 21 cp soap dish 22 cp towel rail 600mm long 20mm dia cp cocks 23 cp bip cock 15mm long body 24 cp bip cock 15mm short body 25 cp mixtue bip cock long body 26 cp mixture pillar cock for whb 27 cp whb pillar cock 15mm 28 cp stop cock 15mm 29 cp coat hook with two prong 30 waste coupling for whb 31 waste pipe for whb 32 m-seal (200gm) 33 measuring tape 3 mtr (steel) pvc tap 34 pvc pipe 50mm, 35 pvc pipe 75mm, 36 pvc pipe 110mm, 37 pvc think trap 75mm 38 pvc socket 100mm, 39 pvc elbow 100mm, 40 pvc elbow 110mm, 41 fevicol sr hooks & screw 42 steel coated coat hook with 4 prongs 43 self taping screw 3 44 self taping screw 4 45 self taping screw 1 46 self taping screw 50/55mm 47 ring curtains 48 hook/ bracket for curtain rod 49 curtain rod cap 50 curtain rod 8 long ss 51 steel jali without hole 100mm, 52 steel jali with hole 100mm, 53 (iron foot mat (4 x 4) ppr pipe 54 ppr tank connector 32mm, misc items 55 glass 4x4 x 5mm thick 56 wooden balli 100mm 10 long 57 bukhari pipe 58 bukhari bend 59 hamam 50 ltrs with stand 60 welding rod, wooden scantling 61 wooden scantling 2x2, make: fur wood 62 wooden plank of size 1111 (l) x 9 x 2 ply woods 63 ply wood 8 x 4 x 10mm, 64 ply wood 8 x 4 x 19mm, 65 ply wood 8 x 4 x 12mm, 66 ply wood 6 x 3 x 19mm, 67 ply wood 8 x 4 x 6mm, 68 ply wood 8 x 4 x 8mm, 69 ply wood 6 x 3 x 6mm, acrylic sheet 70 acrylic sheet for window 4 x 4 71 acrylic sheet 10 x 3 72 sky light sheet 3485mm pgi & cgi sheet 73 pgi sheet 10 x 3 long 74 cgi sheet 10 x 3, 75 cgi sheet 8 x 3,misc items 76 sand bags 77 good 78 distilled water 79 thinner 80 corner batten 2x2 81 half round beading 82 mattress 83 emery paper paints & distemper 84 primer red oxide, 85 paint bus green, 86 paint green, 87 paint and, 88 paint sand, 89 paint white, 90 paint brown, 91 paint sky blue. 92 paint blue, 93 paint po red, 94 paint red, 95 paint yellow, 96 paint black, 97 golden powder 98 distemper cream 99 distemper white 100 paint silver, 101 red terracota paint 102 red epoxy misc items 103 wall putty 104 wood varnish, 105 wood primer, 106 white cement, 107 touch wood 108 quick setting compound (dr. fixit) 109 putty filler 4 110 glass putty paint brush 111 paint brush 5. 112 paint brush 4 113 paint brush 3 114 paint brush 1 115 paint brush 2 nail and nut & bolt 116 nails 1/2, 117 nails 1, 118 nails 2, 119 nails 1.5, 120 nails 2.5, 121 nails 3, 122 nails 4, 123 nails 6, 124 nut & bolt 75mm door items 125 door handle ms 126 door handle aluminium 127 door hinges 75mm 128 door hinges 100mm 129 bow handle 130 door stopper 131 hydralic door closer, 132 sliding bolt132 sliding bolt 133 sliding bolt aluminium with nut & bolt 134 tower bolt aluminium tiles & tile cutter machine 135 tile cutter machine, heating appliances 136 geyser 25 ltr, 137 hamam element 1500w 138 motor for bhati tank 139 puf tank 1000 ltr 140 puf tank 500 ltr 141 hdpe tank 1000 ltr. 142 hdpe tank 500 ltr. table & chair items 143 pvc table, 144 pvc chair 145 dining table plastic 146 computer table 147 computer chair pump & borewell 148 submersible pump 3 hp motor & battery 149 battery 12v 88ah, fire extinguisher 150 fire extinguisher 5 kg, 151 fire extinguisher 2 kg, 152 fire extinguisher 1 kg, binding wi

corporations/Associations/Others

CTN :40782689

23 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For auction sale of condemened machine - praga drilling machine,condemened machine - ms brand bench type drilling machine,condemened machine - investa - pillar type drilling machine,condemened machine - mig welding machine,condemened machine - avery plat form scale,condemened machine - country wood works table,condemened machine - motorized blower,condemened machine - kirloskar lath mk brand mysore model, madras gdi,condemened machine - kirloskar lathe mk brand mysore model madras,condemened machine - metobo double ended electric grinder pedestal type,condemened machine - jyothi type clm square flange long stem coolant pump,condemened machine - block smithy unit without forges with chimneys and hooks,condemened machine - tansi hmt hydraulic power hacksaw machine,condemened machine - tool cutter grinder,condemened machine - 10-hpmotor with starter and old pump motor starter,condemened machine - 1/2 hp single phase motor with pump - 1set,condemened machine - sheet folding and bending machine,condemened machine - indarc welding machine

CTN :40782348

11 Jul, 2025 NA

Chiplun - Maharashtra

Tender For supply of at welding portion and welders for removal and welding of defective rail joints & at destressing location and while other track maintenance from track under sen/chiplun section.

Welding Portion Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government And Public Sector

corporations/Associations/Others