Latest welding rectifier Tenders | Government welding rectifier Tenders

State Government

CTN :40838125

01 Jul, 2025 NA

Una-Hp - Himachal Pradesh

Tender For repair and maintenance of t/well gondpur banehra (jaswalan mohalla) in tehsil ghanari distt una (hp) (sh repair of rising main gmserw pipe 200mm dia by butt welding in t/well gondpur banehre (jaswalan mohallaj & gondpur banehra (harizan bastij

State Government

CTN :40838127

01 Jul, 2025 NA

Una-Hp - Himachal Pradesh

Tender For repair and maintenance of ws5 bhanjal under jal shakti section bhanjal sub division daulatpur in tehsil ghanar distt una (hp) (sh:- repair of distribution system of various dia g.i. pipe line, butt welding peet valve etc in wss bhanjal)

State Government

CTN :40836282

30 Jun, 2025 8.44 Lacs

Multi City - Telangana

Tender For tggenco-ytps(5x800mw) - repair and rectification of lighting fixtures and welding recepticles at different locations in unit-1and2 ,ahp,service building and bop areas as and when required during the year 2025-26 for stage-i

CTN :39431350

27 Jun, 2025 NA

Mumbai - Maharashtra

Tender For bid to ras repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; installation of ibs onboard ins brahmaputra; service provider-1. services - bridge- degutting of existing cabling of nav radars manta and bridgemaster (bridge, bridge top, post 23, ops room and flyco) 2000 mtrs, 2. services -degutting of foundation of existing units of navigational radars, bridge master, ecdis, mr 212 and manta (location- bridge, ops room, post 23 and flyco) 1 job, 3. services- degutting of units of bridgemaster radar, manta and ecdis. (location- bridge, ops room, post 23 and flyco) 1 job, 4. services-degutting and removal of bme radar antenna 1 job, 5. services-bridgetop- degutting and removal of nav radar pedestals/ platforms (qty-02) 2 job, 6. services - bridge manufacturing and fitment of all foundations for installation of mfcs (qty -03), mfds (qty03), optical bearing device (obd) (qty-02), integrated captain console (icc) (qty-02), dgps (qty-02) 12 nos, 7. services - bridge - installation of mfcs (qty -03), mfds (qty-03), optical bearing device (obd) (qty-02), integrated captain console (icc) (qty-02), dgps(qty-02) 12 nos, 8. services- ops room manufacturing and fitment of foundations of mfcs (qty -02), mfds (qty-05), integrated captain console (icc) (qty-01) 8 nos, 9. services- ops room - installation of mfcs (qty -02), mfds (qty-05), integrated captain console (icc) (qty-01) 8 nos, 10. services- post 23 manufacturing and fitment of all foundations for installation including vdr (qty -01), acos (qty-01), mccb (qty-01), ups (qty -03), nddu (qty-02), network switch (qty-02), battery bank (qty-01), transformer (qty-02) 13 nos, 11. services- ops room - installation of vdr (qty -01), acos (qty-01), mccb (qty-01), ups (qty -03), nddu (qty-02), network switch (qty-02), battery bank (qty-01), transformer (qty-02) 13 nos, 12. services - bridge wings/bridge top - manufacturing and fitment of all foundations for installation of mfd (qty -02) at bridge wings (port & stbd) and mfd (qty-01) at bridge top 3 nos, 13. services- bridge wings/bridge top - installation of mfd (qty -02) at bridge wings (port & stbd) and mfd (qty-01) at bridge top 3 nos, 14. services- captain s cabin fabrication and fitment of foundations for installation of mfd (qty -02) at captain s day/night cabin 3 nos, 15. services- captain s cabin - installation of mfd (qty -02) at captain s day/night cabin 3 nos, 16. services - renewal of cable trays (60 mm). (provisioning, installation and renewal of old cable tray including hot work). 500 mtrs, 17. services- manufacuring and fitment of cable conduit 60 sq mm at weather deck 1400 mtrs, 18. services- laying and securing of power cables as per schedule. 1000 mtrs, 19. services- laying of data cable i.a.w cable schedule. 3000 mtrs, 20. services- laying of intra compartment cables as per cable schedule indicated 4000 mtrs, 21. service-termination of old/ unused cables by terminating the shield circumferentially and grounding the core at both ends. 1 job, 22. service for -removal of microtech tiling 1 job, 23. services- surface preparation, deck foundation and deck strengthening for installation of ibs units in all compartments including ops room, bridge, flyco, post, 23, bridge wings (port & stbd), bridge top, captains day cabin/ night cabin and mcr preparation/ strengthening as per drawing. 1 job, 24. services- provisioning of all lagging and welding material during degutting and welding of all devices and compartment. 1 job, 25. services- regutting/degutting of lagging and all other associated units viz firemain line, power supply sockets, cables, trunking etc in all affected compartments due to the installation activities as indicated 1 job, 26. services-fitment of securing brackets on deck head to hold /fasten trunking for cooling system 1 job, 27. services-fabrication and fitment of trunking from deck heads to all cables as per cable route 1 job, 28. services- manufacture and fitmen

CTN :40828763

15 Jul, 2025 3.00 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For providing of custom bid for services - fabrication of repair bay supporting structure for welding section

CTN :40841946

04 Jul, 2025 4.09 Lacs

Bokaro - Jharkhand

Tender For 1. repairing of mast ladder, welding work of cabin mtg. and mast body, repair work of compressor and engine mounting with fitment work, platform crack welding mtg. hole making and drive shaft opening material depositing work. 2. repair of chassis eye

CTN :40211420

25 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For bid to ras bid to ras corrigendum : supply of repair oblic work is required for flt 3 ton sl no 30153 at ge ep jodhpur , parts of vehicle to be replace , fuel pipe intake and return , accelerator cable , fuel filter set of two , hose pipe set , air filter , engine oil , transmission oil , hydraulic pressure pipe , fan belt , exhaust bellow spring , coolant , grease , oil filter , rubber pad for accelerator , hub packing kit , shaft seal , gasket , master cylinder , roof hood , hydraullic oil , brake fluid , high pressure line for fuel injection , maintenance and labour work required , brake setting and bleeding , levling the hydrualic oil , welding of exhaust spring , greasing of wheel and hub , repair to hydraulic pump , cleaning of lifter chain and forks slide , auto electrical wiring , complete servicing of vehicle , complete denting and painting , fixing of hood fixing arrangement , fuel pump repair , caliberation of injector nozzle

State Government

CTN :40808025

01 Jul, 2025 1.99 Lacs

Una-Hp - Himachal Pradesh

Tender For sub head excavation repair of leakage cutting welding of rising main and distribution line various dia various location

CTN :40801139

12 Jul, 2025 1

Baramulla - Jammu And Kashmir

Tender For supply of plainer , cutter machine 7 inches , cutter blade 5 inches , cutter blade 4 inches , flexible wire , fan belt , led blub 9w , holder , 3 pin socket 6amp , 2 pin socket 6amp , switch 6amp , 5 pin socket 6amp , tube light , welding rod , 1mm wire , gang box 4 x 1 , mega phone , inverter repair , brush cutter head , mcb 32 amp , mcb 16 amp , laser pointer , switch board 10 in one , chain of chain saw machine , usb cable 3 mtr

Central Government/Public Sector

CTN :40773560

09 Jul, 2025 20.00 Lacs

Poonch - Jammu And Kashmir

Tender For repair of furniture for units in aor of stn hq bg under ge 881 ews - almirah large steel fd-351,339, 1031, removing unsv shelves of almirah large steel and s&f new shelves made out of 1 mm thick ms sheet with suitable clips/brackets/gas welding (if any) complete all as specified and directed by engr-in-charge., removing unsv foot rest of almirah large steel and s&f of new foot rest made out of 1.6mm thick ms sheet with continuous gas welding complete all as specified and directed by engr-in -charge., removing unsv lock of almirah large steel and s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make godrej/harrison/link, removing of unserviceable handle of almirah large steel and s&f of new steel handle 150mm long with suitable steel nuts and bolts complete all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms round bar 10mm dia all as specified and directed by engineer-in-charge., removing of unserviceable key plate of almirah large steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coats of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel large throughout inside and outside complete with spray machine after properly smoothing the surface all as directed by engineer in-charge., almirah med steel (fd-243, 340, 1032), removing unsv shelves of almirah med steel, s&f of new shelves made out of 1 mm thick ms sheet with suitable clips/ brackets/gas welddng (any one) all as specified and directed by engr-in-charge., removing unsv foot rest of almirah med steel, s&f of new foot rest made out 1.6mm thick ms sheet with continuos gas welding all as spcified in and directed by engr-in-charge., removing unsv lock of almirah med steel, s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make - godrej/harrison/link, removing of unserviceable handle of almirah med steel, s&f of new steel handle 150mm long with suitable steel nuts and bolts all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms bar round 10mm dia all as specified and directed by engineer-in- charge., removing of unservicable key plate of almirah med steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coat of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel medium throughout insided outside complete with spray machine after proper smoothing the surface all as directed by engineer in-charge., locker bed side steel (fd-1029), removing of old unsv hasp and staples of locker bed side steel and s&f of new ms hasp and staples as specified in drg and approved by the engr- in- charge., removing of old unsv conduit pipe of locker bed side steel and s&f of new cp steel 16mm dia 22 guage conduit hanging pipe all as specified and directed by engineer-in- charge., removing of old unsv handle of locker bed side steel and s&f of new cp steel handle 150 mm long as approved by engineer-in- charge., removing of old unsv hinges of locker bed side steel and s&f of new ms hinges 75mm long as approved by engineer-in- charge., removing of old unsv foot rest of locker bed side steel and s&f new foot rest made out of 1.6 mm thick ms sheet with continuous gas w

Welding Rectifier Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government/Public Sector