Latest welding set scrap Tenders | Government welding set scrap Tenders

CTN :40697499

03 Jul, 2025 24.70 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of spares for esp system of unit#1 to 4, ctpp, chhabra for fy. 2025-26 - inner arm assembly for cerm & eerm consistsi)inner arm half-2 nos.ii)hex bolt m16x90-1 nos.(half threaded, grade 4.6) iii) hex bolt m16x40-1 nos.(half threaded, grade 4.6) iv) hex nuts m16-2 nos.( grade 4.6) (moc en-08 for flats ) as per drawing / sample, outer arm for cerm (total weight 8kg+/-2.5-5%)i)roller wheel- 1 no.ii) arm- 2 nos.(10 mm thick flat)iii)washer- 2 nos.(45x28x3 mm)iv)pin - 2 nos.(l114xdia25mm round bar) as per drawing / sample*moc en-08 for roller wheel & pin and ms for arms & washers, sleeve bearing bracket assy. consistsi)sleeve bearing/ci liner (in two halves),c.i.fg-210 - 2nos.ii)ht hex nut+ bolt m12x50- 2nos.iii)ms strip (40x40x10)- 4 nos.iv)weld type - 6 (moc for liner set is as per is-210 fg-210) as per drawing / sample, set ring (material en-08)id-50+/-0.5mm , od-75.0m, height-18.00mm grub screw,m10x15 mm-2nos., grip coupling for eerm (moc en-08 for flat) consistsgrub screw m10x25 mm -1 no.as per drawing / sample, shaft sleeve 50 mm (en-24)inner dia -50+/- 0.5 mmouter dia-70+/- 0.5 mmlength- 130+/-1 mm thickness-10 mm,, shaft sleeve 40.5 mm (en-24)inner dia -40+/- 0.5 mmouter dia-50+/- 0.5 mmlength- 120+/-1 mm thickness-5 mm, plain bearing assembly for rapping mechanism consistsi)lower half -01(is-210-fg 200)ii) upper half -01 01(is-210-fg 200)iii)hex bolt m16x120 mm-02 nos (4.6 grade half threded)iv)hex nut m16 -02 nos.( 4.6 grade)*casting must be free of all kinds of casting defects., top sleeve for emmiting shaft dia.40 mm (material en-8), end shaft for cermdia 50mmlenth : 790mmhole dia 17mmmaterial : en-8 as per drawing / sample, gd screen material as per is 513,crca sheet 2.5mm (as per drawing),material of hook ms, 4.00mm thick, emitting rapping shaft i, emitting rapping shaft ii, emitting rapping shaft iii, c.i. liner in two halves (moc as per is 210 fg 210), shock bar guide angle, u-guide/clamp for collecting electrodes, material - cold rolled ms sheet is 513, 2.50 mm thick or as per drawing/sample, screen tube for emmitting drives of esp, material - ms sheet 5.00 mm thick or as per drawing/sample, item should be painted with red oxide inner/outer side

CTN :40703054

24 Jun, 2025 NA

Thiruvarur - Tamil Nadu

Tender For supply of 3470113000800 r2 , rubber pad drg no 3470113001600 r1 , avm ph 3b polybond make used on 3470700000001 r2 drg no avm ph 3b , seal kit for cylinder no 1 pl no 55 bar 9 to 55 bar 17 and 55 bar 26 as per ispl 2022 drg no seal kit cylinder no 1 , seal kit for cylinder no 2 pl no 57 bar 9 to 57 bar 17 as per ispl 2022 drg no seal kit cylinder no 2 , seal kit for cylinder no 3a and 3b pl no 59 bar 19 to 59 bar 30 as per ispl 2022 drg no seal kit cylinder no 3a and 3b , seal kit for locking cylinder pl no 65 bar 5 to 65 bar 10 as per ispl 2022 drg no seal kit locking cylinder , seal kit for pushing cylinder pl no 63 bar 5 to 63 bar 10 as per ispl 2022 drg no seal kit pushing cylinder , rubber pad drg no 3470220000700 r1 , beta light blt t 72 drg no beta light blt t 72 , tubelar type beta light blt t 72 drg no tubelar beta light blt t72 , camouflage net drg no cat part no 1080000053 , elastomeric seal 3 by 8 inch bsp drg no elastomeric seal 3 by 8 inch bsp , hose pipe sae 100r1at 19idx27 dot 7od 1m long drg no hose sae 100r1at 19idx27 dot 7od , hose pipe sae 100 r9 din 200234sp 3 by 4 inch bsp both side 700mm long from one end to other end drg no hose sae 100 r9 din200234sp , hose pipe sae 100r1at 50 dot 8id x63 dot 5od 1m long drg no hose sae 100r1at 50 dot 8idx63 dot 5od , hose pipe for contraction mechanism used on contraction mechanism kit as per cces of blt t 72 drg no hose pipe , marker rod drg no 34711c0000400 r1 , night vision goggle drg no cat part dot z7 by 58550001437 , o ring for weld nipple 20mm od cces of blt t 72 drg no o ring for weld nipple 20mm od , o ring for weld nipple 16mm od cces of blt t 72 drg no o ring for weld nipple 16mm od , o ring for weld nipple 10 mm od cces of blt t 72 drg no o ring for weld nipple 10mm od , o ring for weld nipple 30 mm od cces of blt t 72 drg no o ring for weld nipple 30mm od , seal kit 157b5112 cces of blt t 72 drg no seal kit 157b5112 , gap measuring instrument range finder cces of blt t 72 drg no cat bar part no 1240014819 , welding rod select arc dia 3 dot 2mm x 450mm long cces of blt t 72 drg no welding rod dia3 dot 2 x 450mm //bid details 2 / 36

Central Government/Public Sector

CTN :40663545

23 Jun, 2025 NA

Medak-T - Telangana

Tender For corrigendum : supply of tc9518750505 - ring d202/135, l 25 (matl. std. sa 182 f91) , tc9751526051 - weld neck flange 10" cl 2500 sch120 rj

Central Government And Public Sector

CTN :40097547

25 Jun, 2025 NA

Thane - Maharashtra

Tender For corrigendum : supply of end fittings (finish machined) as per taps-4/31120/2403/ddand specification pb/e/00040, r0 , end fitting flange forcoolant tube rolling, drawing no. taps-4/31120/2421/dd &pb/e/00040, r0 , ef spool-a, cs ring shrink fitting mockup,drawing no. taps-4/31120/2428/dd and ts no. pb/e/00040,, ef spool-b for cs ring shrink fitting mock-ups, drawing no.taps-4/31120/2428/dd & ts no. pb/e/00040 , ef spool-c forcs ring shrink fitting mock-ups, drawing no. taps4/31120/2428/dd & ts pb/e/00040, r0 , lattice tube for 16channel mock up as per drawing no. taps-3/31610/2507/ddand 2506/dd , lattice tube 100mm long from 241.25 mmdia end for weld qualification drg no. taps3/31610/2506&07/d , liner tube as per drawing no. taps4/31120/2402/dd and specification pb/e/00041, r0 , linertube spacer (button) as per drawing no. taps4/31120/2402/dd and specification pb/e/00041, r0 , linertube spool for rolling qualification as per drawing no. taps4/31120/2424/dd and specification , liner tube flange forrolling qualification-drawing no. taps-4/31120/2423/dd &ts no. pb/e/00040, r0 , journal ring, cal. side (tool steelaisi-d-2) drawing no. taps-4/31150/2401/dd & tspb/e/00042, r0 , journal ring, fm side as per drawing no.taps-4/31150/2401/dd and specification pb/e/00042, r0 ,bearing sleeve fm side for 16 ch. mock up drg no. taps4/31150/2401/dd & ts no. pb/e/00042, r0 , bearing sleevecal. side side for 16 ch. mock up drg no. taps4/31150/2401/dd & ts no. pb/e/00042, r0 , bearing sleeveretainer ring fm side for 16 ch mock up drg no. taps4/31120/2414/dd & pb/e/00043, r0 , bearing sleeveretainer ring cal. side for 16 ch. mock up drg no. taps4/31120/2414/d & pb/e/00043r0 , ef retaining ring as perdrawing no. taps-4/31120/2414/dd and specificationpb/e/00043, r0 , split sleeve assy. (cs- is: 2062gra, znplated) drg no. taps-4/31120/2413/dd & ts no.pb/e/00044, r0 , bellows attachment ring (cs-a519gr1025) drg no. taps-4/31120/2409/dd & ts no.pb/e/00045, r0 , ss seal ring in bellows 308l/321l as perdrawing no. taps-4/31120/2409/dd & ts no. pb/e/00045,r0 , yoke of position assy drg no. taps-4/31120/2407/ddand specification pb/e/00046, r0 , stud 17-4 ph m-30 x 2-6g as per drawing no. taps-4/31120/2408/dd andspecification pb/e/00047, r0 , unthreaded fixing block(part no. 2) ss-193 (yoke assembly) as per drawing no.taps-4/31120/2410/dd , unthreaded fixing block (part no.2a) ss-193 (yoke assembly) as per drawing no. taps4/31120/2410/dd , threaded block (part no. 3) as perdrawing no. taps-4/31120/2410/dd , threaded block (partno. 3a) as per drawing no. taps-4/31120/2410/dd , squarehead screw m-10 x 1.25-6g (850 x 4) as per drawing no.taps-4/31120/2410/dd , hex. main nut (850 x 2) as perdrawing no. taps-4/31120/2410/dd , hex. lock nut as perdrawing no. taps-4/31120/2410/dd , spring washer (b-10)as per drawing no. taps-4/31120/2410/dd , spring washer(b-30) as per drawing no. taps-4/31120/2410/dd , hex soc.headed cap sc. m4 x 0.7 x 8lg as per drawing no. taps4/31120/2410/dd , master gauge for dimension (l-27, c-4,l-30, b-10, c-8) as per ts no. pb/e/00040, r0 , workinggauges for dimension (l-27, c-4, l-30, b-19, c-8) as ts no.pb/e/00040, r0 , landed sleeve insert (ss-410) for ctrolling as per drawing no. taps-4/31610/2414/dd , cstsflanges (ss304l) for ct rolling as per drawing no. taps4/31610/2414/dd

State Government

CTN :40005494

23 Jun, 2025 25.47 Lacs

Bhavnagar - Gujarat

Tender For corrigendum : supply of various pipes and fittings for stacker-cum-reclaimer a & b at lignite handling plant - bltps. - parallel male stud coupling with nut welding, part no. ge 16 s x 1/2", 2, 7, set, 58, pipe clamp pch 12 pipe size, 6, 100, numbers, 18, pipe clamp pch 28 pipe size, 10, 6, numbers, 20, sae 1 1/2" 6000psi flange without "o" ring groove socket, 14, 4, set, 18, sae split flange 1 1/4" 6000 psi, 18, 5, numbers, 10, seamless tee od 48.3 x 7.1 mm socket weld sch-160, 22, 2, set, 4, swivel elbow with nut welding nipple, part no. se-25-l, 26, 8, set, 4, tee 22l with nut welding nipple,part no. t-22-l, 30, 2, set, 2, tee 25s with nut welding nipple t- 25s, part no. t-25-s, 34, 80, meter, 140, tube od 22 x 2 mm thickness seamless, 38, 50, meter, 12, tube od 48.3 x 7.1 mm thickness seamless sch-160, 42, 6, set, 13, elbow with nut and welding nipple,part no. e-16 s, 46, 15, set, 5, elbow with nut and welding nipple,part no. e- 28 -l, 50, 6

CTN :40425959

21 Jun, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply and fixing m.s, ring patti, m.s. angle, weld mesh jail tree guards nagar nigam ratlam (estimate details)

Welding Set Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

State Government