Latest welding spares Tenders | Government welding spares Tenders

CTN :45329993

09 Jun, 2026 373

Mandya - Karnataka

Tender For procurement of water suply items for the year of 2026-27 kothathi - pvc fiber 1.1/2pipe 10feet hand borewell, copper wire 2.5mm 90mtr, copper wire 1.5mm 90mtr, cable clamp, motor pump 6hp x 8 stg, winding wire 1.3 mm copper, winding wire 1.1 mm copper, winding wire 1 mm copper, pump 12stg, pump 8stg, motor repair charges 6 hp, motor repair charges 7.5hp, cable 3core 4 sq mm, cable 3core 2.5 sq mm, mn2 realy(14-23), auto.switch, preventer 7.5hp to 15hp, preventer upto 7.5hp, no push button, terminal block, r,y,b indicater lamp, volts.meter, amps.meter, start no push button, stop nc push button, overload realay, wiring.charges, motor repair.charges, start repair charges, lathe work fitting.charges, pump repair charges, motor lifting and eraction.charges, suction case set nbr, non slam check valve, pump shaft, teflon plate, couple, suction plate, bush(rubber+ stainlesss steel), suction, ss counter, setting sleeve, middle, bush seal, bush seal cover, impeller, diffuser, bowl, bowl bush, key, step sleeve, washer., hexbolt, square nut, patti (motor&pump), adaptor (motor&pump), pump nrv, stud, nut, safety valve, brackets, motor pipe, lamination, stator stack, body sleeve, motor shaft, rotor stack, copper lamination, pressure ring, balance ring, rotor assembly, upper.housing, grommet, connection piece, oil seal cover, oil seal rubbar, water bolt, sand guard, v-notch rubber, couple key, couple sleeve, stud ring, lock ring, bush, carbon bush, lower.housing, allen bolt, thrust bearing.plate, circlip lock, base, rocker support, rocker support nut, thrust bearing, thrust bearing segment, til-ting pad(trust pad), pcd cup, pcd plate, drain plug, stainer, cable.guard, winding wire 1.2 mm copper, boltnut 3/8, boltnut 5/8, insulation.tape, rewireable fuse 250 amps 415v, rewireable fuse 100 amps 415v, rewireable fuse 63 amps 415v, sada pannel board7.5hp to 15hp, d.o.l pannel board- 7.5hp to 15hp, sada pannel board 7.5 hp, d.o.l pannel board- 7.5 hp, hp7.5 x 12 stg pump, hp6 x 12 stg pump, hp10 x 12 stg pump, hp10 x 12 stg motor pump, hp7.5 x 12 stg motor pump, hp6 x 12 stg motor pump, plunger rod for hand pump borewell, bore hole casing for hand pump borewell, compression cone for hand pump borewell, riser pipe, bore well handle, cylinder for hand pump borewell, axcel for hand pump borewell, bearing for hand pump borewell, water tank for hand pump borewell, pedstail stand for hand pump borewell, nut & bolt for hand pump borewell, head for hand pump borewell, chain nut & bolt for hand pump borewell, baket washer for hand pump borewell, gi 1.25 inch copler/coller 32mm for hand pump borewell, connecting rod for hand pump borewell, gi 1.25 inch pipe for hand pump borewell, pvc tape roll, mrf tape, shalk threas, pvc 6inch cassing pipe, pvc 4.5inch cassing pipe, pvc 7inch cassing pipe, gi 6inch cassing pipe, gi 7inch cassing pipe, hacksaw blades 12x1/2x24t, garden pipe 1inch, garden pipe 3/4inch, lather nrv, electrofusion welding machine ef, hdpe 1.1/2inch pipe, hdpe 1.1/4inch pipe, hdpe 110mm pipe, hdpe 90mm pipe, hdpe 75mm pipe, hdpe 63mm pipe, hdpe(electrofusin fittings) 110mm tapping tee(belt type), hdpe(electrofusin fittings)110mm tapping tee (clamp type), hdpe(electrofusin fittings) 110mm end cap, hdpe(electrofusin fittings) 110mm reducer, hdpe(electrofusin fittings) 110mm equal tee, hdpe(electrofusin fittings) 110mm elbow 45, hdpe(electrofusin fittings)110mm elbow 90, hdpe(electrofusin fittings) 110mm copler/coller, hdpe(electrofusin fittings) 90mm tapping tee(belt type), hdpe(electrofusin fittings) 90mm tapping tee (clamp type), hdpe(electrofusin fittings) 90mm branch saddle(belt type), hdpe(electrofusin fittings) 90mm branch saddle(clamp type), hdpe(electrofusin fittings) 90mm end cap, hdpe(electrofusin fittings) 90mm reducer, hdpe(electrofusin fittings) 90mm equal tee, hdpe(electrofusin fittings) 90mm elbow 45, hdpe(electrofusin fittings) 90mm elbow 90, hdpe(electrofusin fittings) 90mm copler/coller, hdpe(electrofusin fitting

corporations/Associations/Others

CTN :45319347

15 Jun, 2026 NA

Bhilai - Chhattisgarh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - bhilai nagar nigam area; replacement of 8 inch frp common slide height 1 point 2 m , area 0 point 5x2 point 4mwelding and fixing at site with all necessary fittings len..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - bhilai nagar nigam area; gym equipments, replacement of swing patta fiber patta for swing length 1 point 75 ft breadth 1 ft height 200 mm properly holed for grip of ch..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - bhilai nagar nigam area; replacement of see saw main frame pipe 60 or 90 mm pipe, length 3 mtr with support of 25x25x3 angle, with all necessary fittings, welding and ..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - bhilai nagar nigam area; replacement of see saw patta 2 nos seat with tee, welding and fixing at site, see saw patta have to be properly molded in pipe length 300 mm hei..,repair, main

corporations/Associations/Others

CTN :45321251

10 Jun, 2026 NA

Kolar - Karnataka

Tender For auction sale of used scrap grinding wheels,used scrap aluminium valves,used scrap ms valves pumps,scrap electric motors,obsolete discarded bolts nuts washers springs,obsolete discarded copper round plate components,used scrap high percentage nickel chromium charge trays,obsolete discarded hoses with ss end fittings filters,obsolete discarded nipples adapters,scrap high percentage nickel chromium heating elements holding rods tubes,used damaged scrap broken saw cutting machine blades,salvaged condemned beml equipment be200,salvaged condemned beml equipment be220,used scrap links of various models,end bits of steel rods and pipes,used scrap 11 kv bulk oil circuit breaker with panel,used scrap codemned heat treatment furnace,used scrap aluminium mixed items.,scrap gi ms pipes,obsolete discarded wheel disc rims,scrap condemned gi ms sheet metal items,obsolete discarded field returned condemned axles pto,used scrap condemned co2 and annual rate contract welding machines and parts,scrap gears,obsolete discarded scrap hydraulic cylinders attachments,used scrap sheet metal items fabricated parts structures,obsolete discarded lamp guards,used scrap small casting forging bushes,used scrap heavy castings steel cast iron scrap-field failure items,condemned scrap hoses with springs,condemned scrap filters,obsolete discarded brake pads brake bands,used oil filled in barrels,obsolete discarded wire harness,scrap defence armoured vehicles7 nos approximately

Central Government/Public Sector

CTN :45235182

26 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap released industrial waste products unserviceable for railway use 1 coal /coke ashes debris steam coal and hard coke dust scrap pieces of u/s fire bricks 2 broken piece of plain and color glass mirror porcelain washbasin commode crockery item etc.3 u/s cotton rag canvas released from coaches old unusable hand gloves aprons etc 4 u/s rubber items window sealing rubber foam pieces gas rubber hose pipes shutter felts damaged & condemned rubber hose and pvc pipe pieces damaged torn vacuum hose pipes without universal couplings small broken pieces of rubber released from roof of the coaches & glass wool 5 unusable timber plywood wooden scrap pieces of compreg ply broken slates pieces of berth shutter panel etc scrap broken pieces of released packing wood timber jolly board condemned wooden seats without rexene & ferrous fittings wood shavings mixed with sand & rubbish 6 released packing material rubber fibre wooden polythene bags gunny bags card board paper puttah gatta thermocole etc. broken and u/s pieces of asbestos cement sheets released from shops 7 unserviceable old lp sheet including pop rivet seat berth number plate unuseable off cuts of new lp sheet unusable pieces of limpet /nftc sheet 8 floor sweeping consisting of sand mud mud muck scrap paper shrubs tree branches including dried grass & leaves coach-rust rusty nails screws and washers u/s aluminum rivets mixed with sweepings and ashes from burn material mud and muck includes unserviceable pieces of stones boulders broken concrete foundations and u/s pieces of other bricks oily greasy rags oily dirt and mud mixed with rubbish heaps excluding sludge oil 9 unserviceable off-cuts of fresh rexene pvc sheet coir recron foam released and unserviceable rexene pvc sheet coir recron foam 10 unserviceable frp products like window shutters louvers inlay lavatory wall protectors wash basin fish tails banjo shutter front cover or axle box mouldings 11 u/s nylon plastic bushes nylon wire rope and other nylon items broken welding hand screen helmet face shield 12 u/s bakelite bakelite box with screws broken and condermned bakelite cover of tumber switch and fuse without non-ferrous fitting mcb with embedded material except aluminum and copper, ceramic pieces plastic pvc sheet and sleeves broken pieces of electric switches battery floats flexible pipes unserviceable broken tube lights and bulbs fuse without non-ferrous fittings broken damaged pieces of insulating material 13 engineering garbage not required by iow and generated inside workshop like tree branches loose earth etc 14 following unserviceable items released from poh activities -bp and fp houses with end ferrous parts, unserviceable buffer pads and draft pads, frp main door embedded with ferrous window bars handle latch etc frp window shutters with embedded ferrous material, unserviceable lavatory door vestibule door fiied with latch/handle and ferrous mouldings etc, hdpe commode chute with ferrous bracket and supporting ring,plastic spool with end pieces of filler wire. 15 ferrous pieces mixed with rubbish weighing not more than 500gms 16 any item of industrial waste not covered above as advised in writing by the site engineer in charge. as is where is basis. loading by purchase. location of material : site c i.e. 100 kld etp plant/lower parel workshop/ maharashtra. custodian :sse/ys/pl(total approximate weight 50 mt.) note 1)the above items are expected generation of various items in the workshop. the railway does not guarantee availability of all types of industrial waste at all times in the same proportion some item may be even zero 2)the railway will not accept any claim for availability of any specific items or their quantities 3)no material other than above shall be permitted to be lifted 4)mode of delivery will be in metric tonne. no sorting & pick and choose of material will be allowed.

Central Government/Public Sector

CTN :45220393

26 May, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of others - during shed cleaning, the scrap/waste generated and mixed in garbage includes dust, dirt, daily cleaning waste removed from pits, champion sheet pieces, cotton waste, broken iron pieces along with ferrous material, old nails, broken electrical wire pieces, rusted nuts-bolts and washers, and other rusted small-big loco and non-loco ferrous parts pieces. it also includes thermocol, polythene bags, cardboard boxes, broken putty pieces, small-big wooden covers/lids, broken cover body filters and relay covers, various loco parts of equipment, broken unusable scrap/rubber items, gaskets, flexible rubber hose pieces along with ferrous fittings, engine torn clothes, unusable leather gloves, broken glass pieces mixed in scrap. pvc scrap, insulated material pieces, small welding electrode pieces, empty rdp tins, various minor copper/bronze parts generated during daily cleaning are also mixed in the scrap. broken tarpaulin, broken plastic jars, acid containers/jars, small broken paint and chemical empty bucket/container pieces are also mixed in the scrap. broken and bent small containers along with ferrous and non-ferrous materials such as nuts-bolts etc. of various loco material parts are mixed in the scrap total lot qty- 300 cubic meter approx .sse ss 11 no et/trs cs industrial waste 06 01 dt 13.04.2026 note 1.delivery of lot by actual weighment in cubic meter 2. qty of lot has been assessed on approximate basis subject to any variation during by cubic meter . 3.lot to be sold as is where is basis. 3.if any other material except description is found while delivery, which is strictly restricted and it cannot be delivered. 4. the purchaser will be responsible for the safety of his labour and other staff in railway premises. 5.it is strictly advised to the bidder to see the lot and the loading point personally before bidding the lot in e-auction no claim will be entertained after sale of lot. 6.qty. of lot has been assessed on approximate basis subject to any +/-10% variation during delivery by actual weighment if any.

CTN :45282015

01 Jun, 2026 1.47 Crore

Imphal - Manipur

Tender For supply of a portable shelter , arrangement for transportation , steel structur , electricla items , external elect store , furniture items - shs 100 x 100x 4.0 mm thick. make: sail /tata / apollo / equivalent isi marked, shs 50 x 50x 2.00 mm thick. make: sail /tata / apollo / equivalent isi marked, rhs 100 x 50x 4.05 mm thick. make: sail /tata / apollo / equivalent isi marked, ms plate 20 swg /1 mm thick as in wall (outer body), ms plate 18 swg /1.22 mm thick as in roof (outer body), ms plate 26 swg /0.46 mm thick as in secondary outer body., 4 mm thick acp sheet (inner) (make alstone/eurobond/ aludecor/ alstrong), hybrid (poly-isocyanate) pir panel insulation shall be provided using 45 mm thick density of 48 kg/m³ with aluminum foil one side, hdf laminated wooden flooring 8 mm thick (make - action tesla/centurry/pergo/greenpanel/micasa), 19mm thick ply make: kitply / green ply / century ply, steel doors: one number of door of size 900mm x 1800mm with inside opening shall be provided with complete accessories., steel doors: one number of door of size 900mm x 2100mm with inside opening shall be provided with complete accessories., detachable ms steps: 1x ms steps of size 600 x 300 mm 6 tier of steps made up of ms angle of size 40mm x 40mm x4mm (wt not less than 4.20 kg/m) would be provided. reference drawing as directed and approved make: sail/tata/jindal, pop rivet 3m x ½”, pop rivet 4m x ½”, welding rod n. 10, primer paint, ir absorbent paint camouflage pattern, metal putty, rubber solution, hydraulic jack with rubber hoses and fittings, electrically operated winch assy, jack side support 2 ton, map boards 6' x 6' with all accessories, vps / projector system stand, canvas cover 30'x30', 3 kg fire extinguisher & fire ball, self screw 25x1, multi spectral camoflauge net, led concealed light 9’’ x 9”x 22 watt, make- havells/ bajaj/ crompton), entrance light (bucket light), ac starter with fittings and mcb, single core wire 2.5mm, single core wire 1.5mm, single core wire 1 mm, insulation tape, modular s/w with cover on/off 5/15, socket 5 amps 3 pin, socket 15 amps 3 pin, switch boards 10 “ x 10”, switch boards 6” x 6” & 6” x 3”, exhaust fan 300mm, work station/ partition, wall mounted fan 450mm, focus / spot light for mapboards, hdmi cable for projector, led screen (sonic view / equivalent) 65'" (164 cm) with modular stand 4k ultra hd (3840 x 2160) etc. make - samsung / sony, de-humidifier 1.5 ton with stablizer and complete fittings etc. make- voltas/ daikin/lg/blue star/ panasonic., electric connections. cables to be used should isi marked of make havells/ crompton greeves/ plaza , fire retardant material. 1.5 sqmm cable to be used in all light points and 2.5 sqmm cable to be used in power points. 18 watt & 11 watt leds of make: cromptongreaves/bajaj/havells/syska . shall be provided at all light points. all switches to be used should be of 6 amp modular type of havells/anchor /crompton greeves/ general electric. the fwg electric connections shall be provided for :-, (ii) power point of 5 pin15 amp socket and 8 nos switch combination of modular type all switch point will be modular type will be provided as approved of make crompton greave/bajaj/havells ., (iii) concealed conduits will be provided for cabling in the portable shelter set of pvc insulated cable 1.5/2.5 sqmm multistanded copper conductor single core 1100v, grade conforming to is 649/1990 of make havells/finolex/plaza, (iv) mcb dp 32amps conforming to is 8828-1996 make crompton greave/ bajaj/havells, (v) miniature circuit breaker (mcb) 6 amp to 32 amps (single pole) make : crompton reave/bajaj/havells., (vi) change over over 63 amps, 3 pole of make: crompton greave/bajaj/havells., cable jointing kit for 11kv (earthed) grade cable for straight through heat shrinkage type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminum conductor cable of size 16 sqmm to 35 sqmm, power backup (ups/ inverter system) capacity 3

Central Government And Public Sector

CTN :45281451

05 Jun, 2026 NA

Damanjodi - Odisha

Tender For tender for supply of welding spares and machines - hand held gas cutting torch in complete asemily with cutting alor gal cutting cohen one pce degelen gal cutting come in one piece degjelen

Central Government/Public Sector

CTN :45135275

25 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - cond and u/s annual rate contract welding plants/ electronic welding plants of various sorts, shapes and sizes with/without available ferrous and non ferrous attachments and fittings in as is where is condition. note: (1) segregation and removal of attachments is not permitted. (2) crane loading is permitted. approx lot weight: 7730 kgs. pl no 98322000

Central Government And Public Sector

CTN :45067005

05 Jun, 2026 NA

Bangalore - Karnataka

Tender For high pressure hi-impulse sae 100r2 a 1-1/4" bore hose assembled with 2 hose fittings-1 sae 90 deg split flange, 2" flange head & 1 sae 45 deg split flange, 2" flange head swivel nut,angles of end fitting in same direction make:parker/manuli/gates/ aeroquip make only overall length - 3250 mm. note - 1. 90 degrees & 45 degrees and straight hose end flanges shall be of single piece without any welding/brazing. 2. hoses should be suitable for high pressure and high impulse application 3.miniumu warranty of one year shall be given for the total hose assembly by the supplier from the date of supply. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45261715

11 Jun, 2026 NA

Dausa - Rajasthan

Tender For providing of custom bid for services - providing the carpentry service with contractors skilled labour for day to day maintenance of doors windows door closers calendars incumbency boards safety boards etc by tightening / adjustment of door / window fittings ..,custom bid for services - providing the plumbing/pipe fitter services with contractors skilled labour for day to day maintenance of water services pipe lines taps in toilets & drinking water booths etc complete for aden/awr or aden/bki section,custom bid for services - providing the painting services with contractors skilled labour for day to day maintenance of staff quarters and service buildings etc complete for aden/awr or aden/bki section,custom bid for services - providing the welder services with contractors skilled labour for day to day maintenance of staff quarters and service buildings etc repairs of all iron work regarding doors windows railings grill etc this includes welding w..,custom bid for services - providing the gardner/mali service with all

Welding Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors