Latest welding station Tenders | Government welding station Tenders

CTN :43030856

16 Dec, 2025 NA

Leh - Jammu And Kashmir

Tender For corrigendum : supply of electrodes welding bronze 3. 15mm , electrodes welding bronze 4. 00mm , nails steel wire round 25 mm x 2 mm , nails steel wire round 30mm x 2 mm , nails steel wire round 125mm x 5. 6 mm , nails steel wire round 20 mm x 1. 6 mm , pad locks ig 4 lever 40 mm , padlocks ig 4 levers 75 mm , seals metallic lead 10 mm , plywood for general purpose mr - bb 7 ply , ply wood for general purposes mr-ab 3 p , soda ashtechnical , table folding cook house mk-iv ss top , broom country , paint rfu marking golden yellow , paint rfu black , paint rfu marking textiles white , paint rfu fin spr signal red , paint rfu syn spr white , paint rfu fin spr red oxide , fevicol sr998 , paper wrapping water proof plain 841 mm , tape niwar undyed 100 mm , soap toilet , wire steel mild annealed 1. 00mm , wire steel mild annealed 2. 00 mm , wire steel mild annealed 5. 00mm ) /bid number: gem/2025/b/6959611 * /dated: 03-12-2025 & & / bid document1 / 26

CTN :43144625

01 Jan, 2026 NA

Kolkata - West Bengal

Tender For supply of lathe with standard accessories , drilling machine,free standng typ - 11 - 2 inch , double grinding machine 8 inch , milling machine , pipe profile cutting machine , 6 inch vice on each work bench , welding trans_remote ctrl and stndard equip. , welding station with welding table , hydraulic press of 15 t , grinding machine for hss drills up_30mm , transportable welding transformer , portable welding machine , hydraulic pipe bending machine , pneumatic driven test pump , pneumatic driven pump_me tightening tool , hand driven hydraulic pump and cylinder sets , calibrating instrumnt_temperature sensor , calibrating instrument_pressure sensors , multimeter , clamp-on ampere meter - 500a , megger - 500 - 1000v , thermal imager , clamping tool for hydraulic hoses , vacuum pump for refrigeration plants , service case for refrigeration plants , electric pipe bender 0-40mm , electrical pressing unit , gas welding cabinet complete , welding electrode cabinet complete , automatic halogen detectors , complete gas central on main deck aft sb , feeler gauge , poker gauge , 20 m welding cable on reel , lockers of free standing type , wall mounted tool boards , work bench with drawers , vice , electrical test switch board , 6 inch vice , wire splice vice approved by owner , doc_lathe with standard accessories , obs_lathe with standard accessories , doc_drill machine,free stndng typ - 11 - 2 inch , obs_drill machine,free stndng typ - 11 - 2 inch , doc_double grinding machine 8 inch , obs_double grinding machine 8 inch , doc_milling machine , obs_milling machine , doc_pipe profile cutting machine , doc_6 inch vice on each work bench , doc_wldng trns_remote ctrl and stndard equip , doc_welding station with welding table , doc_hydraulic press of 15 t , doc_grinding machine_hss drills up_30mm , obs_grinding machine_hss drills up_30mm , doc_transportable welding transformer , doc_portable welding machine , doc_hydraulic pipe bending machine , obs_hydraulic pipe bending machine , doc_pneumatic driven test pump , obs_pneumatic driven test pump , doc_pneumtic drvn pump_me tghtening tool , doc_hand driven hydraulic pump and cyl. sets , doc_calibrating instrumnt_temp. sensor , doc_calibrating instrument_pr. sensors , doc_multimeter , doc_clamp-on ampere meter - 500a , doc_megger - 500 - 1000v , doc_thermal imager , doc_clamping tool for hydraulic hoses , doc_vacuum pump for refrigeration plants , obs_vacuum pump for refrigeration plants , doc_serv case for refrigeration plants , doc_electric pipe bender 0-40mm , doc_electrical pressing unit , doc_gas welding cabinet complete , doc_welding electrode cabinet complete , doc_automatic halogen detectors , doc_complte gas central main deck aft sb , doc_feeler gauge , doc_poker gauge , doc_20 m welding cable on reel , doc_lockers of free standing type , doc_wall mounted tool boards , doc_work bench with drawers , doc_vice , doc_electrical test switch //bid details 2 / 65 board , doc_6 inch vice , doc_wire splice vice approved by owner

CTN :42938083

15 Dec, 2025 NA

Amritsar - Punjab

Tender For corrigendum : supply of welding rod , switch assy , selector switch red and green , hood light assy , ignition switch , carbon bush set , amp meter , volt meter , bty lead negative , bty lead positive , hose assy , fuel pipe fuel pump to feed pump

CTN :42897356

13 Dec, 2025 11.11 Lacs

Multi City - Karnataka

Tender For corrigendum : supplying materials for the construction of village market hut at korlagundi - ks-portland cement, ks-coarse sand (zone iii), ks-mixer (concrete small used in culvert), ks-cudddapah slab 4 cm thick/shahabad/thandur blue, ks-weld mesh 75 x 25 mm of 6g to 10g, ks-ms pipes of 80 mm to 100 mm dia, ks-rms gusset plate, ks-corbon electrodes, ks-welder grade i, ks-hom of welding and grinding machine, ksa-tools and plants at 2 percent on material, ks-ms flat 12 x 75mm, ks-cast iron ornamental design, ks-m.s. square bright bars 20mm, ks-cast iron arrows, ks-expansion bolt, ks-ready mix primer paint (ready mix red lead paint), ks-painter class i, ks-enamel metal paint, ks-dry distemper, ks-whitening, ks-add watering charges at 1 % on material, ks-lime, ks-unit cost as per the specification, ks-cobble stones of 60 mm thick, ks-plate vibrator having 3 ton compaction force, ks-gravel 2.36 mm/murrum, ks-water tanker, ks-vibratory roller 8 tonne, ks-solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm, ks-casurina poles 100 - 150 mm, ks-tmt bars fe 500, ks-binding wire, ks-silver oak or equivalent planks 38 mm thick, ks-casurina poles 75 - 100 mm dia, ks-broken stone aggregate 20 mm size, ks-broken stone aggregate 12 mm to 10 mm size, ks-plasticizer / super plasticizer, ks-mixer (concrete) - 1 cum capacity, ks-hom of vibrator 0.71 days, ks-boulders, ks-size stone 20 x 20 x 25 cms, ks-bond stone 20 x 20 x 45 cm, ks-mechanic class ii/mechanic hmp grade i/eme grade, ks-hom of cutting and grinding machine, ks-rubble stones, ks-broken stone aggregate 40 mm size

CTN :43115001

15 Dec, 2025 1.10 Lacs

Sumbal - Jammu And Kashmir

Tender For overhauling repairs to water turbine driven horizontal pumping unit at achoora gurez of misd hajin. - overhauling/major mechanical repairs/replacements of damaged non-functional mini water driven turbine (damaged by heavy snow slide) coupled with 03 cusec horizontal pumping unit. the job comprises of following works: pump sidei. engaging of labours in the machine drive chamber by way of moving of boulders and other trash till the machine chamber be cleaned and washed., ii. temporary oiling the turbine and pumping unit on machine chamber side till the the mechanism of machinery is free from rust and dust, then decoupling the pumping unit from the turbine coupling and genset from belting. using skilled labour and other tools and tackles., iii. dismantling of 8 x8 horizontal pumping unit from its existing pump foundation to machine floor smoothly without any hammer stroke using skilled job knowing personnel., iv. dismantling of the pumping unit parts at machine floor,removing of defective rotating kit assembly from the pump body using proper tools to be arranged by firm., v. shifting of the dismantled kit assembly with the allied accessories and defective chain pulley block to road side upto the lead of 150 m by head loading and then loading the rotating kit assembly in private load carrier to be arranged by the firm and shifting to workshop for conducting necessary repairs., vi. complete servicing of rotating kit cum bearing housing at workshop using diesel oil till the whole bearing assembly and rotating parts are washed and cleaned and free from rust and dirt. the job includes dismantling of bearing housing and removing of defective parts like damaged shaft, broken bearings and other items smoothly. the job includes removing of broken bolts from the bearing housing, re-tapping the damaged holes and providing and fitting of new holes., vii. repairs to impeller shaft of the pump by way of rebuilding the damaged portion using arc welding and then machining, polishing, threading completely till the size of the shaft is brought to required specifications. the job further includes providing and fitting of check nut as per sample., viii. manufacturing/providing and fitting of gm bush to suction part and gm cooling ring, gm gland with bolts. the job includes casting, machining, finishing to proper dimensions., ix. providing and fitting of high pressure gasket on suction side and delivery side., providing and fitting of ht bolts of assorted size, xi. rebuilding the wearing ring seats of suction and coupling end plates using ci welding electrodes. the job includes machining and finishing to proper dimensions., xii. repairs to defaced/ damaged impeller shoulder ring seats using ci welding electrodes. . the job includes machining and finishing to proper dimensions., providing and fitting of taper roller bearing on coupling side and gland side. the job includes greasing of bearing xiv. 32315, xv. 32314, xvi. assembling of bearing housing with rotating kit at workshop to check the rotating kit assembly is free from any obstacles and loading and shifting to site in private load carrier to be arranged by the firm including haltage and retun back of workers, turbine side:- repairs to turbine side by way of:complete cleaning and washing of turbine chamber by way of removing of boulders and other trash from the turbine by engaging of labours.complete servicing/ washing/oiling of turbine assembly in turbine chamber till the assembly of turbine and guide vanes are free from the rust and dust and then complete oil washing the guide vanes, guide hinges and outer body of turbineproviding and fitting if turbine shaft gm bush bearingtesting of turbine assembly on no-load decoupled from pump assembly by way of charging of turbine chamber to check the vibration, sound, rpm, setting of turbine guide vanes, hinges to ensure smooth functionre-installation of pumping unit by way of fitting of rotating kit assemblycomplete painting by black japan to entire pu

CTN :42897350

13 Dec, 2025 8.65 Lacs

Multi City - Karnataka

Tender For corrigendum : supplying materials for construction of godawn at korlagundhi village - kogo-unit cost as per the specification( gi sheet), kogo-ms pipes of 80 mm to 100 mm dia, kogo-rms gusset plate, kogo-corbon electrodes, kogo-welder grade i, kogo-hom of welding and grinding machine, kogo-mechanic class ii/mechanic hmp grade i/eme grade, kogo-hom of cutting and grinding machine, kogo-tools and plants at 2 percent on material, kogo-broken granite metal 12.5 mm, kogo-broken granite metal 10 mm, kogo-coarse sand (zone iii), kogo-portland cement, kogo-mixer (concrete small used in culvert), kogo-red oxide, kogo-add watering charges at 1percent on material, kogo-boulders, kogo-size stone 20 x 20 x 25 cms, kogo-bond stone 20 x 20 x 45 cm, kogo-broken stone aggregate 12 mm to 10 mm size, kogo-plasticizer / super plasticizer, kogo-mixer (concrete) - 1 cum capacity, kogo-broken stone aggregate 20 mm size, kogo-hom of vibrator 0.71 days, kogo-water proofing cement paint, kogo-painter class i, kogo-add providing and removing scaffolding at 3percenton labour, kogo-add handling , loading and unloading at 1percent on material, kogo-dry distemper , kogo-whitening, kogo-add brush, putty, glue at 5percent on cost of paint, kogo-ms sheet 20 gauge, kogo-fitter class i, kogo-ready mix primer paint (ready mix red lead paint), kogo-add handling , loading and unloading at 2percent on material, kogor-add hom of welding and grinding machine at 2percent on material, kogo-18 gauge 75 mm ms laths of 2.8 m length, kogo-side guides, kogo-suspension shaft, kogo-ms side shed clamps, kogo-high tension coil, kogo-ball bearing for rolling shutters, kogo-center pully, kogo-locking arrangments, kogo-ms handles, kogo-bottom lock nail, kogo-aluminium window frame section 1.20 mm thick, kogo-nylon rollers, kogo-rubber beading for shutters beading, kogo-pvc edge beading, kogo-alluminium tower bolt - 20 cm, kogo-alluminium handles - 15 mm, kogo-cleat angles, kogo-chrominum plated screws, kogo-5.50 mm thick plain glass, kogo-fabricator, kogo-silver oak or equivalent planks 38 mm thick, kogo-casurina poles 100 - 150 mm, kogo-jungle wood runners and planks, kogo-tmt bars fe 500, kogo-binding wire, kogor-solid concrete blocks (40x20x20 cms)-5.00 n/sqmm

CTN :43102910

16 Dec, 2025 NA

Aligarh - Uttar Pradesh

Tender For supply of spair parts - backhoe loader (mahindra) filter kit, excavator loader jcb 20 filter kit, load on crane jcb filter kit, tata ace filter kit, tractor (new holland) filter kit, tractor (eicher) filter kit, excavator loader tmx- 50 filter kit, excavator loader (tata hitachi) filter kit, backhoe loader 3 dx filter kit, backhoe loader ace filter kit, tractor loader (john deere) filter kit, skid steer loader (bactra) filter kit, skid steer loader (bobcat) filter kit, nala cleaning machine (leyland) filter kit, hydraulic tipper (tata-1613) filter kit, tractor (power track) filter kit, compactor (tata 1613) filter kit, dumper pressure (eicher) filter kit, small tractor (mahindra) filter kit, trolla (tata) filter kit, hydraulic trolley jack 05 ton capacity, tractor umbrella complete, small tractor umbrella complete, backhoe loader teeth (front/rear) set complete, vehicle lifting jack-10 ton, portable welding machine, tractor (eicher-312) bearing 31305 (nbc/skf), tractor (eicher-312) bearing 31207 (nbc/skf), tractor (mahindra-265) bearing 30205 (nbc/skf), tractor (mahindra-265) bearing 30207 (nbc/skf), tractor (sonalika) bearing 30305 (nbc/skf), tractor (sonalika) bearing 32207 (nbc/skf), tractor (eicher-312) engine overhauling kit, tractor (mahindra) engine overhauling kit, tractor (eicher) front axle spindle, trolley hub 7.50x16, tata hyva clutch kit set, tractor (eicher) fan belt-48, tractor (mahindra) fan belt, tata ace (fan belt with teeth), backhoe loader (mahindra) filter kit, hyva tipper filter kit, tata ace clutch cylinder (upper/lower), tampo tipper tata ace clutch set, road sweeping ready con brush set, tractor (mahindra) clutch set, tractor (eicher) clutch set, tata ace sound system, section pipe 4 inch (pbc), section pipe 3 inch (pbc), rickshaw front wheel rim with tire (solid rubber), rickshaw rear wheel rim with tire (solid rubber), rickshaw wheel bearing, rickshaw handle, skid steer loader rim (10.16.5), tampo tata ace rim (145.80.12), hydraulic trolley rim (7.50 .16), backhoe loader front bucket 6 in 1 multi-purpose, backhoe loader front wheel bearing (tata hitachi), tata ace engine overhauling kit, tractor (sonalika) engine overhauling kit, mechanic loader filter kit escort, thrust bearing (eicher), sheet 12 gauge ms, sheet 10 gauge ms, sheet 16 gauge ms, checker sheet 8 gauge ms, sheet 08 gauge 2 inch ms, angle 1.5 inch 2 strand ms, angle 1 inch 2 strand ms, channel 4x6 inch ms (3x), channel 5x6 inch ms, channel 2 inch 6 strand ms, channel 4x6 inch ms, backhoe loader front wheel bearing (nbc/skf), skid steer loader front wheel bearing (nbc/skf), hydraulic pipe 5 ton capacity trolley (nbc/skf), hydraulic pipe shovel bucket, nut bolt various sizes, welding rod packet (10 nos maruti company), welding rod packet (12 nos maruti company), welding rod packet (16 nos maruti company), welding rod packet steel (10 nos maruti company), welding rod packet steel (10 nos maruti company), mobile toilet tap plastic, mobile toilet seat, tractor hitch, trolley hook, rim 16.9 x28, rim 12.4 x28, rim 1000x20, dustbin capacity 10 liter, tata ace radiator, tractor (mahindra) radiator, tractor (new holland) radiator, tractor (sonalika) radiator, tata-709 radiator, excavator (mahindra) loader radiator, excavator (tata hitachi) radiator, excavator bm radiator, rim (600x16), asbestos jetting pipe, backhoe loader hydraulic pipe 514, oxygen cylinder, lpg cylinder, mechanic loader 3 kg front wheel bearing, hydraulic trolley bearing-32213 (nbc/skf), hydraulic trolley bearing-32214 (nbc/skf), hydraulic trolley bearing-32216 (nbc/skf), hydraulic trolley bearing-32212 (nbc/skf), gas cutter pipe, welding lead, welding goggles, air compressor pipe, hyva tata 1518 ultra diesel filter kit, tampo (tata ace) water body, tractor (sonalika) water body, tata (709) water body, tractor (new holland) water body-fan belt, tractor (mahindra) water body, driver seat, hammer chisel, spanner set various sizes, wrench set, diesel pipe tractor mahindra, diesel p

CTN :43079682

22 Dec, 2025 6.06 Lacs

Gokak - Karnataka

Tender For supplying materials of kitchen room and ac sheet in govt high school benachinmaradi k in benachinmaradi gram panchayat - bib cock 20mm nominal sieze bore, flats ms, chlorinated polyvinyl-chloride pipe 25mm outer dia, mixer(concrete)-1cum capacity, boulders.,, mixer (concrete small used in culvert.), handling loading and unloadding 3% on material, labour charges for lifting and placing in position and making connection at 7% on material.03, polyenthylene water storage tank of specified capacity l.12, pvc pipe of 4kgcum, 63 mm.00, add brush, putty, sand paper at 5% on cost of paint,, liquid wood filter, add brush, putty, sand paper at 2% on cost of paint.,., water proofing cement paint,., add brush, putty, sand paper, roller at 5% on cost of paint.,, plastic emulision paint 01, add brush,putty at 5% on cost of distemper primer, distemper primer.,., mathi/nandi wood scantling,, hom of machinaries for planing,., add cutting and other wastage 5%,, mathi/nandi wood planks for panels 25 mm thick,, add hom welding and grinding machine at 2% on material, fabricator,., ., thick plain glass of 5.50mm, chromium plated screws,.,.,, cleat angles.,., alluminium handles - 15 mm.,., alluminium tower bolt-20 cm., pvc beading.01, rubber beading for shutters beading,.,., nylon rollers,., powder coated 60-70 micron,, add brush at 1% on cost of paint.,., enamel metal paint.,.,, add providing and removing scaffolding at 3% on labour.,, painter class i.,, add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint., ready mix primer paint (ready mix red lead paint)., add hom of welding and grinding machine at 4% on materi, welder grade i,, fitter class 1, m.s rods,, add white cement for pointing at 2% on material, border tiles 30 x 10 cms,, glazed tiles 300x400, vitrified tiles 10 mm thick 600 x 600, mm, hom of vibrator 0.71 days.,, plasticizer / super plasticizer.,., binding wire,., tmt bars fe 500,., add handling loading and unloading at 1% on material.,, mason class i (with tools).,.,, solid concrete blocks (40x20x20cms) 4.00 n/sqmm, add watering charges at 1 % on labour.,, add sundries charges at 1 % on labour.,, bond stone 20 x 20 x 45 cm.,, rubble stones.,, casurina poles 100 - 150 mm.,, add handling loading and unloading at 2% on material.,, casurina poles 75 - 100 mm dia., jungle wood runners and plank.,, silver oak, or equivalent planks 38 mm thick.,, add watering charges at 1 % on material.,, mixer (concrete) - 1 cum capacity.,, portland cement,., coarse sand (zone iii),, broken stone aggregate 12 mm to 10 mm size,, broken stone aggregate 20 mm size,, broken stone aggregate 40 mm size - bib cock 20mm nominal sieze bore, flats ms, chlorinated polyvinyl-chloride pipe 25mm outer dia, mixer(concrete)-1cum capacity, boulders.,, mixer (concrete small used in culvert.), handling loading and unloadding 3% on material, labour charges for lifting and placing in position and making connection at 7% on material.03, polyenthylene water storage tank of specified capacity l.12, pvc pipe of 4kgcum, 63 mm.00, add brush, putty, sand paper at 5% on cost of paint,, liquid wood filter, add brush, putty, sand paper at 2% on cost of paint.,., water proofing cement paint,., add brush, putty, sand paper, roller at 5% on cost of paint.,, plastic emulision paint 01, add brush,putty at 5% on cost of distemper primer, distemper primer.,., mathi/nandi wood scantling,, hom of machinaries for planing,., add cutting and other wastage 5%,, mathi/nandi wood planks for panels 25 mm thick,, add hom welding and grinding machine at 2% on material, fabricator,., ., thick plain glass of 5.50mm, chromium plated screws,.,.,, cleat angles.,., alluminium handles - 15 mm.,., alluminium tower bolt-20 cm., pvc beading.01, rubber beading for shutters beading,.,., nylon rollers,., powder coated 60-70 micron,, add brush at 1% on cost of paint.,., enamel metal paint.,.,, add providing and removing scaffolding at 3% on labour.,, painter class i.,, add wire brush, fine steel woo

corporations/Associations/Others

CTN :43066646

26 Dec, 2025 1.22 Crore

Mughalsarai - Uttar Pradesh

Tender For supply of pway maintenance tools c c -versine measurement kit , 6 kg abc fire extinguisher , mechanical track jack 15t capacity , rake ballast with long handle , electronic toe load measuring device , electric arc welding machine , steel sections cutting equipment , rail drilling machine , chamfering kit , thermit welding tool set , rail profile weld grinder , rail trimmer power pack for at welding , rail heating blower for at weld , insulated rail dolly , dip lorrey , tent , chair , umbrella , plate screw tubular spanner , fire bucket with stand , p way measuring kit , track gauge cum level , abrassive rail disc cutter machine , weld measuring straight edge , fish plate nut bolt spanner , g i steel bucket , wire brush , adjustable spanner , telescopic self supporting ledder , crow bar , clip applicator , chiesel , gas cutting equipments machine with spare gas cylender , portable dc welding generator , gang hooter , pipe wrench , chain saw , mono rail basket , filler gauge , emergency inflatable lightning equipment , laser distance mete , rail roller , wire basket , jim crow , ballast profile template , prc sleepers lifting chain , destressing roller , tommy bar , box spanner , beater steel with handle , chain 10 meter long with both side with s hook , measuring tape 5 mtr , safety goggles transparant polycarbonated , safety jacket , handle for 2kg hammer , handle for 3kg hammer , handle for 5kg hammer , wooden handle for ballast rake , safety shoes , h s flag red with pvc handle , h s flag green with pvc handle , banner flag red with pvc handle , rain coat , water proof keyman shoulder bag heavy , tri color led torch , torch with rechargeble patrol man torch , wooden block , drill twist , first aid box , industrial safety hand gloves , steel whistle , dragon torch , safety cross belt with reflective tape , retro reflective tape 45m long , cotton canvass tarpoline , sipper water bottle , grease graphite , small testing hammer , inspection cum chipping hammer , elcometer , pocket steel tape , straight edge , metallic tape , logll line with 20kg lead ball , probing rod , calliper inside and outside , feeler gauge , mirror 10x15 cm , torch light , magnifying glass 100cm , piano wire with clamps , plumb bob , steel scrapper , leaser thermometer , spirit level , binoculars , current meter , echo sounder , schmidts hammer , dye penetration kit , magnetic crack detector , welding gauge , duro meter , auto level , hydraulic torque wrench , erc mk v ro rdso drg no t 5919 , metal liner t 8254 , metal liner t 8255

State Government

CTN :43055645

15 Dec, 2025 6.00 Lacs

Jobner - Rajasthan

Tender For 56/2025-26 interconnection work in various schemes under sub. division kishangarh renwal. - providing, lowering, laying, aligning, fixing in position at all level/ depths ci class - b specials as per is : 1538, amended up to date in trenches complete including all material, labour, testing and commissioning along with pipe line/ appurtenence as per technical specifications and as per direction of engineer. plain ended ci specials including tail piece, spigot end and socket end. up to 300 mm dia note : e/w to be measured and paid separately., providing and fixing of flanged/ plain ended ms specials made from ms sheet strips of relevant is specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of engineer-in-charge. ms pipe specials upto 600mm dia (with minimum 5mm thickness sheet), earth work in excavation by mechanical means (hydraulic excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 mtr. including required all safety provisions etc.:, all kinds of soil, dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work., providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)., dismantling of flexible pavement for pipe line line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work., bituminous courses, granular courses, work of lnter connection in ac/pvc

Welding Station Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government