Latest welding tank Tenders | Government welding tank Tenders

corporations/Associations/Others

CTN :45564954

18 Jun, 2026 6.00 Lacs

Nagapattinam - Tamil Nadu

Tender For supply erection and commissioning of cooking equipments for amma unavagam in nagore bus stand at nagapattinam. - supply of following ss vessels, plastic materials & mixy, tilting grinder and other equipments at site etc., complete, ss sambar karandy, ss water drum 50 litres capacity, ss water jug, ss plate, ss oil cane, ss tumler, ss spoon, ss murum, filter karandy, aluminium bucket ( 25 l - 15 kg), emergency light, mobbu, plastic container ( 50 litres), plastic container ( 10 litres), plastic mate, plastic stool, broom, cloth mate, idly cloth, ss arival munai, repaire for tilting grinder ( 15 litres), wall clock, mixcy with 3 jar, supply, erection and commissioning of stainless steel pulveriser of 50 kg per hour capcity with 2 hp single phase motor etc., complete, steam generatorthe outer jacket is made of 6mm & 8mm thick ms plates. inner shell by 2mm thick aisi 304 grade ss sheet and inner bottom plate by 4mm aisi 304 grade ss sheet. steam generator is fitted with necessary accessories viz. automatic float ball assembly, pressure gauge meter, water level indicator, safety valve and drainage valve etc.,this lid is made of 1.6mm stainless steel sheet. all outlet copulings are stainless steel. it is operated by gas/firewood. the capacity of steam, size ms outer : 28" dia x 45" hss inner 17" dia x 35" h, m.s. fire bar stand, 6" dia ms smooke pipe, instalation charges, rice cooking & multipurpose vessel it is fabricated by 304 grade 2b finish stainless steel sheet. the vessel and the perforated plate is made of 2mm thick ss sheet. the perforated plaste is kept at a distance of 100mm from the bottom plate for the effective filtration of kanji 1" drainage nozzle is fitted plate with ball valve for draining the "kanji"the vessel lid is made of 1mm thick 304. grade 2b finishes thickness stainless steel sheet. vessel sides are supported by 65mm dia ss rod with steam inlet connection. tilting handle pipe of 28mm dia ss pipe provided with locking arrangements. it is fitted with stam inlet 33mm dia pipe, size 19" dia x 19" h (15kg), ss legs for vessels, service connection accessories l.t. 1100v pvcbain marie (hot case)fabricated by 1.25 mm sheet. it consists of 2 nos ss container, each container 10 litre capacity. it is mounted on ss standsize : 24" l x 14" b x 11" h ( ii holes), size : 24" l x 14" b x 11" h ( ii holes), supply of ss waste dish landing table with the following specificationoas : 1100 x 600 x 850 mmtop : made out of 304 grade 16 swg ss sheet bottom cross bars & garbage chutelegs : made out of 16 swg 40mm od ss pipe legs with adjustable nylon boots, supply of ss plate collecting trolley with the follwing specificationoas : 600 x 500 x 750 mm top : made out of 304 grade 16 swg ss sheet trays duly supported by ss pipeus : 01 nowheel : the trolley is fitted with rotating wheels with stopper, steam pipe line and fitting and supply of following materials for gas pipeline works and fittings 4 cylinder connections

corporations/Associations/Others

CTN :45564955

18 Jun, 2026 6.00 Lacs

Nagapattinam - Tamil Nadu

Tender For supply erection and commissioning of cooking equipments for amma unavagam in gh campus at nagapattinam. - supply of following ss vessels, plastic materials & mixy, tilting grinder and other equipments at site etc., complete, ss sambar karandy, ss water drum 50 litres capacity, ss water jug, ss plate, ss oil cane, ss tumler, ss spoon, ss murum, filter karandy, aluminium bucket ( 25 l - 15 kg), emergency light, mobbu, plastic container ( 50 litres), plastic container ( 10 litres), plastic mate, plastic stool, broom, cloth mate, idly cloth, ss arival munai, repaire for tilting grinder ( 15 litres), wall clock, mixcy with 3 jar, supply, erection and commissioning of stainless steel pulveriser of 50 kg per hour capcity with 2 hp single phase motor etc., complete, steam generatorthe outer jacket is made of 6mm & 8mm thick ms plates. inner shell by 2mm thick aisi 304 grade ss sheet and inner bottom plate by 4mm aisi 304 grade ss sheet. steam generator is fitted with necessary accessories viz. automatic float ball assembly, pressure gauge meter, water level indicator, safety valve and drainage valve etc.,this lid is made of 1.6mm stainless steel sheet. all outlet copulings are stainless steel. it is operated by gas/firewood. the capacity of steam, size ms outer : 28" dia x 45" hss inner 17" dia x 35" h, m.s. fire bar stand, 6" dia ms smooke pipe, instalation charges, rice cooking & multipurpose vessel it is fabricated by 304 grade 2b finish stainless steel sheet. the vessel and the perforated plate is made of 2mm thick ss sheet. the perforated plaste is kept at a distance of 100mm from the bottom plate for the effective filtration of kanji 1" drainage nozzle is fitted plate with ball valve for draining the "kanji"the vessel lid is made of 1mm thick 304. grade 2b finishes thickness stainless steel sheet. vessel sides are supported by 65mm dia ss rod with steam inlet connection. tilting handle pipe of 28mm dia ss pipe provided with locking arrangements. it is fitted with stam inlet 33mm dia pipe, size 19" dia x 19" h (15kg), ss legs for vessels, service connection accessories l.t. 1100v pvcbain marie (hot case)fabricated by 1.25 mm sheet. it consists of 2 nos ss container, each container 10 litre capacity. it is mounted on ss standsize : 24" l x 14" b x 11" h ( ii holes), size : 24" l x 14" b x 11" h ( ii holes), supply of ss waste dish landing table with the following specificationoas : 1100 x 600 x 850 mmtop : made out of 304 grade 16 swg ss sheet bottom cross bars & garbage chutelegs : made out of 16 swg 40mm od ss pipe legs with adjustable nylon boots, supply of ss plate collecting trolley with the follwing specificationoas : 600 x 500 x 750 mm top : made out of 304 grade 16 swg ss sheet trays duly supported by ss pipeus : 01 nowheel : the trolley is fitted with rotating wheels with stopper, steam pipe line and fitting and supply of following materials for gas pipeline works and fittings 4 cylinder connections

Central Government / Public Sector

CTN :45469205

23 Jun, 2026 NA

Nashik - Maharashtra

Tender For corrigendum : supply of hardware items - forged hexagonal head bolt with nut spring washer and two plain washers. , austenitic stainless steel hex head bolts, heavy hex nuts, and washers for cryogenic pressure vessel/flange bolting, per asme sa-320/astm a320 for low-temperature service. , carbon steel fasteners

CTN :45525406

22 Jun, 2026 NA

Pondicherry - Pondicherry

Tender For main work : construction of canteen building for the puducherry technological university inside the ptu campus under rusa fund. sub work : providing and fixing of kitchen chimney, gas pipeline connection and kitchen equipment for the canteen building inside the ptu campus under rusa fund (iii call) - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

State Government

CTN :45263804

22 Jun, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

Central Government/Public Sector

CTN :45465699

23 Jun, 2026 7.00 Lacs

Dinajpur - West Bengal

Tender For supply of laboratory consumables under ntep for the office of the chief medical officer of health and the secretary dh and fws of uttar dinajpur district - laying and jointing pvc pipe. heading, plastic disposable sputum containers- wide mouth(plastic disposable sputum containers (60ml capacity) (water tight, screw-top, translucent opalescent, polyethylene of thin plastic) (burning easily and appropriate size (at least 4 cm diameter)), diamond marker pencil (6 (15.24 cm.) holder with artificial diamond (hard stone) embedded at one end with screw cap, to mark on microscope glass slides), water bucket (plastic) (water bucket (plastic) with tap 40 ltr capacity of good quality), slide holding forceps (stainless steel) (slide holding forceps (stainless steel) 15 cm), plane tissue paper rolls (plane tissue paper rolls (size+ length 21 mtr x breadth 10cm (non doted) (two ply) ), foot operated paddle bucket plastic with cover (foot operated paddle bucket plastic with cover (12 ltrs capacity)), measuring cylinder 1000 ml (measuring cylinder 1000 ml capacity (glass) round bottom), measuring cylinder 500 ml (measuring cylinder 500 ml capacity (glass) round bottom), measuring cylinder 100 ml (measuring cylinder 100 ml capacity (glass) round bottom), filter paper type-1 (filter paper whatman no1.11 cm diameter containing 100 leaves per box), filter paper type-2 (filter paper whatman no1.15 cm diameter containing 100 leaves per box), stickers adhesive labels (stickers adhesive labels (small size) for sputum containers), water bath with thermometer with digital temp. meter (water bath with thermometer with digital temp. meter 5 liter for the preparation of carbolfuchsin), lens clean tissue paper(lens clean tissue paper 100 pages pack), plastic tray (plastic tray 24 x12 good quality), spirit lamp aluminum (spirit lamp aluminum 50 ml), drop bottle plastic (250ml capacity built in stem all polypropylene; leak proof screw cap made of polypropylene), storage for stock bottle (plastic) (white bottle 2 ltrs capacity), binocular microscope cover (plastic good quality), balance with cover box (can measure 10mg accuracy to 200 mg digital + battery system), broom stick (8) (broom stick (8 ) bundle of 100 pcs good quality), smear preparation loop (plastic loop with inner diameter 3-4 mm for smear preparation of biological specimen), slide box-type-1 (slide box (50 capacity) plastic), slide box-type-2 (slide box (100 capacity) plastic), glass slide new glass slide (glass slide new glass slide size 76mmx26mm, thickness 1.3 mm, edges polished, sealed in a moisture absorbing dassicant pack scratch free), silica gel (big 25gm), silica gel (blue small (04gm)), absorbent cotton roll (absorbent cotton roll 300gm/450gm), para film ((2 wide) 250ft). refractive index of 1.48. it should be colourless, odorless, transparent, free from fluorescence in day light with relative density of 0.827 to 0.890, viscocity of 110 to 230m pas, specific gravity of 0.76-0.78 at 15.5 degree c), biohazerd labels (biohazerd labels 4 x 2.875 ), thin transparent plastic pkt. (thin transparent plastic pkt. (8 x 6 )), glass rod (glass rod 6-8 mm dia x 20 length), thermocol box (thermocol box 6.5 x7.5 x7.5 ), thermocol transport box (size. thickness of box 2.5cm, outer dimension: 18.5cm length x 13 cm breadth x 14cm hight (with lid), inner dimension:14.5cm length x 8cm breadthx 13 cm hight (with inner part of lid)), stop watch (digital), thin black permanent marker pen (fine tip), zip lock plastic pouch (zip lock transparent pkt. 10 x14 plastic pouch), zip lock plastic pouch (zip lock transparent pkt. 06 x06 plastic pouch), alminium vessel (5.5 ltr (3mm gauge)), pvc tape (2.5 ), rubber band ( nylon), gel pack (250gm), gel pack (500gm), falcon tube (falcon tube (sterile)material: polypropylene, capacity: 50ml,tube style: centrifuge, bottom style: conical, neck style: wide, top style: threaded, max rcf:15500xg, graduations: yes, graduations range: 5-50 ml, graduation interval: 2.5 ml, colour

CTN :45379269

15 Jun, 2026 NA

Attingal - Kerala

Tender For corrigendum : 3226122/26,attingqal municipality supply of kitchen and pooja items for town hall - kitchen items, chembuvarppu. supplying the pure copper, min 3mm thick, hand hammered, tin lining inside mandatory brass handles heavy duty size, 1500lit capacity, " medium size, " small size, aluminium valiya ( alloy uruli large) supply and stacking hindalium/heavy gauge aluminium capacity 100l having 4mm+with lid, andav/chembu supply and stacking copper with tin lining mix of 5lit to 20lit, basin, supply and stacking ss304 grade dia various 18" to 22" having min thickness of 0.8mm, steel thotti, supplying and stacking ss304 grade capacity various from 10lit to 15lit with handle, chattukam, supplying and stacking iron/cast iron dia various from 24" to 30" with wooden handle, koruva chattukam, supplying and stacking cast iron koruva chattukam, supplying and stacking kuthupponi stainless steel perforated ladle, long handle 3 feet, supplying and stacking arippa charuvam materials the copper with tin lining capacity of 50lit to 80lit for washing the rice, supplying and stacking kettle make with stainless steel ss-304 capacity of 5l to 10 l, supplying and stacking ss-304 thavi-steel,flat ladle, 2 ft handle, supplying and stacking steel spoon ss-304 having 12 to 15 serving spoon, supplying and stacking cup-steel having ss-304 capacity of 200 ml, supplying and stacking dheda-alloy having aluminium material large vessel 80lit, supplying commercial high pressure gas stove burner double ring isi marked aduppu, supplying aluminium mug make with aluminium having capacity 1 litre, supplying stainless steel (ss 304) mug having capacity 1 litre, supplying stainless steel (ss 304) idli kuttuka having 200 idlis at a time with trays and lid, supplying gas aduppu having single burner, isi marked for small cooking, supplying virak aduppu having firewood stove make with iron and portable., supplying grinder with tilting wet grinder capacity of motor 1.5 hp with isl mark of 15 lit, " 10 lit, pooja items, supplying para + 1 idangazhi material with brass bronze traditional kerala para, supplying ammayi vilakku + maravilakku material with brass having 2 ft with handcrafted., supplying panineer spray with brass / silver plated for rose water, supplying thalapppoli vilakku materials of brass with hand held plate with lamp, supplying thattam materials with brsss/ bronze dia of 12 to 15, supplying valiya vilakku materials of brass having 5 feet height nilavilakku, supplying cheriyavilakku having brass materials having 2 feet height nilavilakku, supplying thattam having stainless steel (ss-304) dia with 15, supplying iripidi palaka having wood type low stool for sittting, supplying laminated ,framed having size 18x 24 min of sreekrishnan,narayanan photo, supplying chandanakinnam having brass/stone for sandle paste, supplying waste collecting bucket having heavy duty plastic 60 l with lid & pedal color coded small & large size

CTN :45430824

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of lab equipment - basic engineering lab materials, digital balanceweight 500g, accuracy 0.01g, top pan. tare function,caliberation- automatic external display type: led, digital tds meterrange 0-9990 ppm, resolution 1ppm, digital lcd display, atc feature., digital ph meterph range o to 14, resolution 0.01 ph, digital display, joule calorimetercopper vessel, battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), thermometer (alcohol), stop clock, mortar with pestleporcelain/agate,gazed exterior, unglazed grinding surface.item weight 2290 gramsitem diameter 4 inches, water distillation unitoutput capacity: 2 4 liters per hourmaterial: stainless steel boiler and condenserheater: built-in electric heating elementpower supply: 220 240 v ac, 50 hzcooling: water-cooled condensersafety: automatic low water cut-off, ic regulated battery eliminatoric regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., galvanometermoving coil type, 30-0-30 scale, sensitivity 20 a/div, resistance approx. 100 ohms., voltmeterdc voltmeter; range 0 10 v, analog , ammeter dc (0 - 2 amp), cdecade resistance box3 or 4 dials, range 0.1 to 100 or 1k , constantan/manganin wire coils., rheostathigh-grade ceramic tube, oxidized resistance wire, 0.5a 5a, range 10 100 ., solar cell kitthe apparatus consist of variable dc power supply, led, solar cell and two multimeters (or an ammeter and a voltmeter). a variable dc power supply of 0-5v. light source is provided by led. the illumination intensity of the led can be controlled, wheatstone bridge kitseries arm: four decade dials in steps of thousands, hundreds, tens, & units of ohms. ratio arm: the ratio arm of the bridge is capable of selecting multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100, 1000 for resistance measurements. two press keys are provided, one marked b is for battery & one marked g is for galvanometer one toggle switch is provided for internal battery a sensitive galvanometer is provided in the bridge., ohms law verification kitbattery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, meter bridgetype: 1 m length, with uniform wire (resistance wire)material: constantan or manganin (low temperature coefficient)scale: 0 100 cm, engraved or printedbase: wooden or metal, rigid, non-conductive supportjoints / terminals: brass or copper, fixed for connections2. galvanometertype: analog, moving coil or digital (for null detection)range: sensitive to detect micro-ampere currentsinternal resistance: high, typically ~100 or as specified5. cells / power supplytype: leclanch cells (1.5 v each) or dc power supplynumber: 2 4 cells in series (or supply ~3 6 v)

State Government

CTN :45455477

26 Jun, 2026 29.66 Lacs

Bidar - Karnataka

Tender For supply of equipments & goods to veterinary college, bidar - table top weighing scale (call-2), platform weighing scale (call-2), mixer grinder (call-2), tilting grinder (call-2), exhaust system installation charges (call-2), mug starter for blower (call-2), gi ducting (call-2), ss filters (call-2), exhaust hood (call-2), centrifugal blower (call-2), three sink unit with splash back (call-2), insect killer (call-2), coconut scrapper with stand (call-2), onion/potato bin (call-2), stainless steel rack of 5 shelves (call-2), spoon sterilizer(call-2), two shelves trolley (call-2), platform trolley (call-2), hood type dishwasher (call-2), four vessel bain marie with tray slide (call-2), vegetable cutting machine with 6 nos. blades (call-2), four door reach in freezer (call-2), water dispenser with in built uv purifier - cold, normal and hot 3 taps (call-2), dough ball making machine (call-2), semi automatic chapathi making machine (800-1000/hour) (call-2), semi automatic chapathi making machine (500 - 600/hr) (call-2), dosa tawa (call-2), two burner cooking range (call-2), single burner bulk cooking range (call-2), steam system installation charges (call-2), ss ball valve 3/4 in (call-2), steam pipe line (call-2), idli box with stand (call-2), sambar vessel with stand (call-2), rice vessel with stand (call-2), steam boiler call-2

CTN :45346458

10 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For corrigendum : supply of i year physics, chemistry lab items dept use - digital balanceweight 500g, accuracy 0.01g, top pan. tare function,caliberation- automatic external display type: led, digital tds meter range 0-9990 ppm, resolution 1ppm, digital lcd display, atc feature., heating mantlecapacity: 500ml rating 200w with energy regulator, joule calorimetercopper vessel, battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), thermometer (alcohol), stop clock, hotplateplate size:25 x 30 cm (10 x 12 inch) with adjustable thermostate controlup to 350 degree temprature controlheating element: nichrome heating elementpower supply: 220 240 v ac, 50 hz, electric bunsen burnermaximum temperature up to 800 degree c, power supply 220 to 240 v, power 350 w, water distillation unitoutput capacity: 2 4 liters per hourmaterial: stainless steel boiler and condenserheater: built-in electric heating elementpower supply: 220 240 v ac, 50 hzcooling: water-cooled condensersafety: automatic low water cut-off, ohms law verification kitbattery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, boyles law apparatusthe apparatus includes the quill tube, a retort stand, a clamp, and a mounted meter scale.quill tube specifications:length: approximately 50 cm.bore diameter: uniform bore, roughly 1 mm to 2 mm.construction: glass tube with one end sealed.trapped substance: a mercury pellet (or thread) of length 10 to 15 cm is introduced to enclose a column of air. mounting: attached to a half-meter or meter scale., helical spring apparatusstructure: a rigid support mounted on a heavy metal base, typically cast iron, to ensure stability during tests.springs: high-tensile steel spiral springs, typically (approx 25 mm) diameter, (100 mm) long.measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement. loading mechanism: a, typically (50g), hook-attached weight hanger at the bottom. pointer: a fine pointer attached to the bottom of the spring moves along the scale.accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

Welding Tank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government / Public Sector

State Government

Central Government/Public Sector

State Government