Latest well testing equipment Tenders | Government well testing equipment Tenders

State Government

CTN :41248601

20 Aug, 2025 NA

Patiala - Punjab

Tender For corrigendum : purchase of multiple items for ptps projects - milk testing equipment, smart weighing scale, ai gun & accessories, tag applicator & pins

State Government

CTN :41333626

29 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen

Central Government/Public Sector

CTN :41399481

19 Aug, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of test leads of scope make testing equipment for ntpc korba

Central Government/Public Sector

CTN :41387691

18 Aug, 2025 NA

Nashik - Maharashtra

Tender For supply of intercom, p/n: ab-20-i , panel for ground testing, pnp-140a-i , control testing equipment, kpa-sdu- 10m2-i , automated working place, arm dk-30

CTN :41227369

23 Aug, 2025 NA

Rafiganj - Bihar

Tender For corrigendum : supply of civil equipment lab - compaction factor apparatus, vee bee consisto meter, beam moulds 500mm, beam moulds 600mm., beam moulds 700mm, advanced half cell potential system, cement autoclave, sieves (fa) 20cm dia brass, flexure strength testing machine, concrete mixing tray, double wheel harrow steel trolls, concrete maturity testing equipment (imported), rebar locators, diameter and cover meters with software, (imported), cod vials, cod vials stand, pipette, digital pipette with elongated tip, conical flask, volumetric flask, measuring cylinde, funnel, funnel, beaker, reagent bottles, spatula, durhams tube, filtration assembly with oi free vacume pump, vertical autoclave, drawing software-, staad pro, open flow, printer, video camera

CTN :41378219

18 Aug, 2025 NA

Ayodhya - Uttar Pradesh

Tender For dismantling of 150 cusec, kirloskar make bha-100 v.t. pump set no 5 installed in utraula pump canal, balrampur after removing h.t. motors then opening pump coupling, motor stool, driving coupling thrust bearing delivery pipe joints & lifting column pipe shafts tubes rubber bearing spiders sleeves etc. all component up to bell mouth by repairing of rubber bearing for intermediate shaft by casting and machining cell. press fitting neoprene rubber in bronze cell, cutting groove as per original shape and size for pump, bronze will be used in recasting, repairing of impeller of pump by opening & taking out all the twisted and rubbed vanes, straightening the twisted vanes and welding on rubbed portion by high quality s.s. welding electrodes & grinding etc. for giving it, it is original shape and size fitting vanes in impeller body using new lock washers balancing the impeller complete on precision machines its cartage from site to suitable work shop and back including cost of material, labour and t&p etc., and replacing of muff coupling of stainless steel material as per original sample for jointing intermediate shaft including cost of material & machining etc. and replacing of shaft sleeve pump side of standard make of stainless steel material as per original shape & size repairing of ratchet pin housing with cutting rubbed portion welding with c.i. welding rod with proper method, then machining from different angle on precision machine to bring it proper shape & size including cost of material, labour and t&p etc., fitting of ratchet pin in housing including cost of material, labour and t&p etc., providing and fitting of necessary spares in pump including cost of materials, i.e. key for propeller boss-01 no., key for shaft sleeve ps-01 no. key for muff coupling -06 no. lock nut for bearing nut-01 no. ratchet pin with spring-01 no. key for ratchet pin housing-01 no. o ring for bearing holder-01 no., o ring for bearing spider-02 no. with labour t&p required for proper completion of work and errection & commissioning by fitting g.m. bowl liner, lowering bell mouth, propeller ball, propeller shaft and vanes (impeller) shaft sleeve, bearing holder, rubber bearing enclosed tube, column pipe stool, thrust bearing and all component, jointing tee then fitting motor and coupling with pump, filling cooling oil given by department, complete water cooling system, then connect panel and testing of pump.

CTN :41378884

22 Aug, 2025 12.3 Thousand

Bengaluru - Karnataka

Tender For supply of machinery and it equipment laboratory on turnkey basis - printers, fly press, power hacksaw, pedestal grinding machine, pillar drilling machine, cnc mill, cnc turn , conventional mill, conventional lathe, cnc simulators, machine vice 150 mm (drilling), rotary table, sleeves mt 3, sleeves mt 2, sleeves mt 1, self centering drill chuck 12 mm, applications for pneumatic & hydraulic, hydraulics & electro hydraulic trainer , pneumatics & electro pneumatics trainer, storage cabinets (amariah), chairs for computer lab, furniture for computer lab, mechanical work benches with vice, two tier bunker cot in nos., drawing board with stand in nos., ups-20kva, pedestal industrial fan, wall mounting fans for work shop, welding machinery & equipment, software-master cam (5 users), software - solid works (60 users), led projector, white boards , smart board, concave milling cutter dia 63 x 6 radius x bore size dia 27 mm, t slot cutter with parallel shank dia 17.5x8mm width shank dia8mm, parallel shank end mill dia 16 double fluted, parallel shank end mill dia 12, parallel shank end mill dia 10, parallel shank end mill dia 8, parallel shank end mill dia 6, knurling tool straight & diamond cut, hss tool bit 1/4. x 1/4 x 6., oil stone 25 x 52 x 150 mm, hss centre drill dia 8 mm, hss centre drill dia 3.0 mm, hss counter sink bit 120 degree, hss machine reamer dia 6 - 10 mm, hss hand reamer dia 6 - 10 mm, hss die m4 - m12 with die stock, hss tap set for size m4 - m12 with wrench (set), hss drill bit straight shank dia 3 to 12 mm (step of 0.5 mm) (set), sine bar 200 mm, goose neck clamp set, strap clamp set, clamp .c. 10.inch, clamp .c. 5.inch, tool makers clamp 2.x 5., magnetic v block, round file second cut 8.inch, round file second cut 10.inch, round file second cut 12.inch, round file bastard 12.inch, triangular file smooth 6.inch, triangular file smooth 8.inch, triangular file second cut 6.inch, triangular file second cut 8.inch, triangular file second cut 10.inch, triangular file bastard 10.inch, square file smooth 6.inch, square file smooth 8.inch, square file second cut 6.inch, square file second cut 8.inch, square file second cut 10.inch, square file bastard 12.inch, hand file second cut file 10.inch, flat file rough 12.inch, flat file smooth 8.inch, flat file smooth 10.inch, flat file second cut 8.inch, flat file second cut 10.inch, flat file second cut 12.inch, flat file bastard 12.inch, convex milling cutter dia 63 x 6 radius x bore size dia 27 mm, outside caliper (divider) 150, machine brushes, bench brushes, file brushes, hammer cross peen 0.75 kg with handle, ball peen hammer 250 gms& 500 gms, flat chisel, hacksaw frame fixed 300mm, hss hand hacksaw blade 18 tpi, needle file set, warding file smooth 6.inch, knife edge file smooth 6.inch, knife edge file smooth 8.inch, knife edge file second cut 6.inch, knife edge file second cut 8.inch, knife edge file second cut 10.inch, half round file smooth 6.inch, half round file smooth 10.inch, half round file second cut 6.inch, half round file second cut 10.inch, half round file second cut 12.inch, half round file bastard 12.inch, round file smooth 6.inch, round file smooth 10.inch, round file second cut 6.inch, material handling equipment, bench grinder, dia indicator - 0.01mm with styallus (needle type), feeler gauge 0.05 to 1.0 mm, radius gauge from 7.5 -15mm, radius gauge upto 7mm, thread pitch gauge metric & inches, vernier bevel protractor, universal magnetic dial stand, outside micrometre 25-50 mm, outside micrometre 0-25 mm, dial vernier 150 (0.02 lc), digital vernier 0 - 150 mm, vernier caliper 0 - 200 mm, vernier caliper 0 -150 mm, vernier height gauge 300 mm, surface plate granite 600 x 600 x 80 mm with stand, number punch 5 mm set, center punch, scriber, try square 4 inch blade, divider spring type -150 mm, inside caliper (divider) 150, computers., material testing lab equipments

CTN :40050707

18 Aug, 2025 6.56 Lacs

Unnao - Uttar Pradesh

Tender For corrigendum : supply of different materials used for testing at electricity test division, unnao under electricity distribution circle, unnao. - o/c & earth fault relay (ashida adr 241 b), clamp meter (0-20a), combination pilier (taparia), rachet set (taparia), grinder bosch (240 volt, ac operated), drill machine (240 volt, ac operated), spanner set (taparia), pcv tape (red, yellow & blue) colour, pin type & u type copper lug 2.5 mm2 (100 each), dc indication led (24 volt to 36 volt) suitable for 11kv & 33kv control pannel, flexible copper wire havells (red, yellow & blue, black color) 2.5mm2, tripping coil with assembely make tripping coil assembly stable 33 kv vcb (stelmec, toshiba, cg, schneider), oti(oil temperature indicator) with limit switch alarm & trip contact, temp range (0 c to 150 c), wti (winding temperature indicator) with limit switch alarm & trip contact, temp range (0 c to 150 c) with gradient adjustment through a shunt for ct secondary input (1amp to 5amp), closing coil with assembely make tripping coil assembly stable 33 kv vcb (stelmec, toshiba, cg, schneider)

corporations/Associations/Others

CTN :41173184

13 Aug, 2025 32.00 Lacs

Jodhpur - Rajasthan

Tender For supply, installation and commissioning of machinery / testing equipment/apparatus to establish workshop in jdvvnl’s premises for repair of failed distribution transformers

corporations/Associations/Others

CTN :41177313

19 Aug, 2025 32.00 Lacs

Jodhpur - Rajasthan

Tender For corrigendum : supply installation and commissioning of machinery testing equipment_apparatus to establish workshop in jdvvnls premises for repair of failed distribution transformers - supply, installation and commissioning of machinery / testing equipment/apparatus to establish workshop in jdvvnl s premises for repair of failed distribution transformers against tn-2067, cost of annual maintenance charges to charged annuallly for next five (5) years after expiry of guarantee period

Well Testing Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others