Latest wendy house Tenders | Government wendy house Tenders

State Government

CTN :45520196

03 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45520197

03 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

CTN :45671410

07 Jul, 2026 NA

Ferozepur - Punjab

Tender For material and labour for construction of 06 x toilet cum bathing cubicle (4/4) in ferozepur - toilet cum bathing cubicle structure with pre-fab colns, purlins, rafters, wall (gi metal skinned puf panels), ppgi roof. pvc door (08 nos) of size 750 x 2100 mm and aluminum ventilator (08 nos) of size 450 x 450 mm, including all necessary fixing arrangement and fittings accessories as per tech specification and drawing att., well burnt common building bricks of sub class b of size 23 x 11.5 x 7.5 cm conforning to is: 2212-1991, opc (43grade) confirming to is 8112 in 50 kgs hdpe bags (make -ultratech/ ambuja/acc), 20mm graded stone aggregate (crushed) conforming to is-383 1970. they shall be clean, hard, tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities., 40mm graded stone aggregate (crushed) conforming to is-383 1970., they shall be clean, hard, tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities., interlocking tiles of size (200 x 120 x 60 mm thick gde m-35) i section of best quality., fine sand shall be clean, free from adhesive coating and shall not contain clay, mica and other impurities. the maximum quantities of clay and fine silt in sand shall not be more than 5% by mass as per is-383-1970., hard core stone aggregate 50-63 mm size., non skid ceramic floor tiles of size 400 x 400 x 7 to 8 mm thick. they shall be abrasion resistant conforming to is-15622, make: johnson/ kajaria/somany, looking mirror size 600x450mm of best quality aluminium frame and brass screw and washer for fixing with wall panel. make: modi guard /saint goban, white cement. make:- jk/ birla, water proofing compound, cement based paint for external wall. make:- shalimer/ asain/ berger, welding rod, oil bound distemper (off white) make: shalimer/asain/ berger, sand paper, turpentine oil, painting brush 4"., painting brush 2"., red oxide primer. make:- berger / shalimar / asian, paint synthetic enamel black colour. make:- berger / shalimar / asian, ms flat 35 x 3 mm, cp soap dish 125 mm. make: - hindustan/ jaguar/ sona/ prayag, angle iron staging of size 1.5 x 1.5 x 2.5 m with vertical ms angle columns of size 50 x 50 x 6 mm with 3mm thick ms sheet fitted at top of the staging work as shown in drg along with connecting accessories make: jindal/tata/sail/rinl, 1.25 mm thick ms sheet manhole cover of size 600 x 600 mm, incl ms handle of size 25 x 5 mm, with angle iron 40 x 40 x 5 mm all around and cross bracings. make: jindal/tata/sail/rinl, soakage pit cover of size 2.56x1.56m with angle iron 50 x 50 x 5 mm with all around and cross bracing and 1.25mm thick ms sheet including 600 x 600 mm suiteble opening cover with handle, septic tank cover of size 2.0 x 1.22m with angle iron 50 x 50 x 5 mm with all around and cross bracing and 1.25mm thick ms sheet, rotational moulded high density polyethylene water storage tank (cylinderical vertical tank) of 1000 ltrs capacity as per is 12701 of 1996 along with 20 mm dia brass valve with pvc float ball. make: - sintex/ polycon/ hindustan, gi socket 15 mm, isi marked. make: jindal/tata/sail/rinl, gi elbow 15 mm, isi marked. make: jindal/tata/sail/rinl, gi tee 15 mm, isi marked. make: jindal/tata/sail/rinl, gi union 15 mm, isi marked. make: jindal/tata/sail/rinl, cp bib cock 15 mm dia long body isi marked. make: - jaguar/ onida/hindware, gl pipe 15 mm dia, isi marked, make: jindal/tata/sail/rinl, gi nipple 15 mm 3" long, isi marked, make: jindal/tata/sail/rinl, gi plug 15 mm, isi marked, make: jindal/tata/sail/rinl, 15 mm dia pvc connection pipes, isi marked, gi socket reducer 20-15 mm, isi marked, make: -jindal/tata/sail/rinl, gi pipe 20 mm dia med grade, isi marked, make: -jindal/tata/sail/rinl, gi socket 20mm, isi marked, make: - tata/ jindal/ ravindra, gi elbow 20 mm, isi marked, make: jindal/tata/sail/rinl, gi tee 20 mm, is

CTN :45697491

02 Jul, 2026 4.71 Lacs

Kharagpur - West Bengal

Tender For construction of academic tower (g plus 7)rcc framed structure including, internal & external services of civil, electrical & mechanical, hvac, fire fighting system, fire alarm system, lift, lan, networking supply, installation, testing and commissioning of solar photo voltaic power generation system, cctv, building management system (bms), wi-fi system, etc.,. civil, electrical & mechanical development and bulk service like roads, pathways, street light with led, sewer lines, water supply distribution lines, stp stp treated water distribution lines, strom water drains, rain water harvesting, underground sump, sub-station and fire pump room, dg set, signage etc. and horticulture and landscapping work on epc basis mode-1 including operation and maintainence for all civil, electrical an mechanical, horticulture services for five years at iit kharagpur, west bengal. sh : hiring of inspection vehicle (four wheeler) for office use of iit kharagpur project division-ii, cpwd, kharagpur.

State Government

CTN :45687919

02 Jul, 2026 NA

Bilaspur (Hp) - Himachal Pradesh

Tender For construction of govt. primary school at malraon tehsil jhandutta distt. bilaspur (hp) (sh: construction of balance work on one room building with verandha i.e. framed structure work up to columns) bsp/2024/32)

Central Government/Public Sector

CTN :44949096

27 Jun, 2026 48.17 Lacs

Jaduguda - Jharkhand

Tender For bid to ras tender for supply of internal external painting including repair works of 28 nos a type blocks at nwp : : - white washing with lime to give an even shade old work two or more coats , painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work , removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete , repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground all complete as per direction of engineer in charge with cement mortar 1 ratio 4 1 cement 4 fine sand , finishing walls with acrylic smooth exterior paint of required shade old work two or more coat applied at the rate 1.67 ltr per 10 sqm on existing cement paint surface , demolishing r.c.c. work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 2 4 1 cement 2 coarse sand zone iii 4 graded stone aggregate 20 mm nominal size , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level. thermo-mechanically treated bars of grade fe 500d or more. , centering and shuttering including strutting , propping etc. and removal of form for lintels , beams , plinth beams , girders , bressumers and canti , providing and fixing double scaffolding system cup lock type on the exterior side of building structure , upto 25 metre height , above ground level , including additional rows of scaffolding in stepped manner as per requirement of site , made with 40mm dia m.s. tube

Central Government/Public Sector

CTN :45637773

25 Jun, 2026 NA

Bhavnagar - Gujarat

Tender For auction sale of others - scrap abandoned structures 1. rpf office (behind dc pay cash office) (03 units) 2. structure (electric feeder) at opposite tb hospital, bvp (01 unit) 3. building at opposite sub station, sinha colony , bvp (01 unit) 4. tb hospital (01 unit) 5. over head tank (01 unit) 6. shed connecting near 301 outhouse (01 unit) total strcuture - 08 units, location - sinha colony and bhavnagar para, abandoned railway quarters type i bearing nos. 321 - 01 unit, 79/l - 01 unit, location - bvp, total type i qtrs - 02 units. type ii bearing nos. 321 - 01 unit, location - bvp, total type ii qtrs - 01 unit. type iv bearing nos. 328 - 01 unit, 477/b - 01 unit. location - bvp, total type iv qtrs - 02 units. total units in lot (sheds and qtrs) - 13 units. in lot abandoned condemned consisting of released masonary stone off sizes approx. - 833.2 cum. , released brick off sizes approx. - 469.95 cum., released rcc slab off sizes approx. - 274.22 cum., released ac sheet off sizes approx. - 650.66 sqm. , released wooden off sizes approx. - 8.22 cum., released manglore tiles off sizes approx. - 680 nos., released steel gate off sizes approx. - 4.16 sqm., released door shutter with frame off sizes approx. - 138.82 sqm., released window shutter with frame off sizes approx. - 190.99 sqm., released ms scrap(fish plate,tiebar,angle,nut,bolt,pipe,fencing etc.) off sizes approx. - 1220 kg., released rail off sizes approx. - 665.25 rmt., released wooden jaffri off sizes approx. - 7.38 sqm., released wooden ventilation off sizes approx. - 0.6 sqm., released iron door off sizes approx. - 14.13 sqm., released gi sheet off sizes approx. - 212.95 sqm. available with custodian sse (w) bvp , mode of delivery by lot basis, loading by purchaser. note: 1. dismantling is permitted up to ground level only. below ground level does not be permitted. cutting is permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is complete since the locations are surrounded with residential blocks. 2. after removing/ clearing the rcc/ brick machonary rubbish from the spot only, the delivery of wood/ iron material will be affected. 3. contractor should take care of any cable while dismantling and digging damage to railways shall be recovered as per extent rules. 4. part delivery is not allowed at the same location. fdp 50 days.

corporations/Associations/Others

CTN :45268343

04 Jul, 2026 NA

Pudukkottai - Tamil Nadu

Tender For corrigendum : work contracr for construction of body building and driver cabin of 10ton lorry chasis of ashok leyland ea 1920 4800mm wb h6 bs6 front end structure semi elliptic ac cowl chassis

corporations/Associations/Others

CTN :45612689

03 Jul, 2026 NA

Thoothukudi - Tamil Nadu

Tender For construction of department vehicle body building and driver cabin work (materials and labour) for two nos new 10 ton diesel driven heavy goods vehicle, ashok leyland ea1920 4800mm wb h6 bs6 front end structure semi elliptic ac cowl chassis 34 nos.

CTN :45605186

02 Jul, 2026 2.75 Crore

Kondagaon - Chhattisgarh

Tender For supply of furniture and internal fitouts for permanent campus of jnv kondagaon (chhattisgarh) - discription of work, school building, (a) classroom, (i) classroom desk large sizesupply & installation big desk (for two persons)-the overall dimensions of desk will be 1066mm * 930mm * height 760mm, complete as per specifications enclosed and direction of engineer-in- charge having the table top shall be made up of 18.0 mm thick plywood is 303 of mr grade osl (one side shall be laminated, and other side shall have balancer finish). table top dimensions shall be w 900 mm x d 380 mm. edge towards bench shall be post formed with round edge. the remaining three edges must be sealed with 2mmthick pvc edge banding tape. edge band must be trimmed on edges and corners. the desk shall be have low chemical emission of vocs (voltage organic compounds) and carcinogens, contributing to a healthier room environment. seat and back rest shall be made of 18mm thick plywood of mr grade osl (one side shall be laminated, and other side shall have balancer finish) except back rest. back rest shall be have both sides colour lamination.technical details of seat and back rest are mentioned below:seating bench dimensions shall l 930 mm x w 300 mm. front side shall be rounded with post forming. remaining three edges shall sealed with 2mm thick pvc edge banding tape.back rest dimensions shall l 930 x h 200 mm upper side shall be rounded with post forming remaining three edges shall be sealed with 2mm thick pvc edge banding tape. desk shelve shall be made of prime quality 0.8mm thick crca sheet of h150mmxd300mm and side stiffeners of crca tube size 19mmx19mmx1mmthick. one vertical support (partition) of square tube size 25mm square x1.2mm thick must be provided at centre of tray . upper modesty made of prime quality 0.8mm thick crca sheet powder coated should be embossed with dimples in round shape, height will be 150mm, there should be perforated lower modesty made of prime quality 0.8 mm thick crca sheet of size h150mmxd21mm with square perforation, crca tube of size 19x19x1mm thick to be inserted for full length at bottom of jali . bag hook should be provide on both side of piller made of minimum 4mm dia rod side frame structure:- made of prime quality crca pressed form section 165mmx25mmx1mm thick welded to 25mmx50mmx1.2mm thick crca tube , seat and back side frame structure made of prime quality crca pressed form section 165mmx25mmx1mm thick welded to 25.4mm diameter x 1.6mm thick erw-1pipe , there will be 8no. horizontal supports are 25mmx25mmx1.2mm thick crca pipes. .bottom rectangular tube 50x25x 1.2mm thick should be closed with ppcp cap bothside sand pipe dia. 25.4x1.6mm thick should be closed with metal (backside) and other side (undertheseat) ppcp cap, complete as per engineer incharge desk should be in semi knock down form with the help 16 connecting pipes ; 8 pipes on each side : connecting pipe size will be 20x20x1.2mm .all metal pieces shall be welded properly strongly and conformity with regulations with co2 welding shall be used , crca metal shall be coated after being treated with at least three stages and cleaned from oil , grease , dust and other dirt using special thermal control coating for metal furniture to form a layer of base coating of (iron phosphating) (0.4 0.8) gm/m , automatic spray coating shall be applied to be followed by a drying process in a thermal furnace with suitable temperature and time for the process , metal pipe & 7 tank treatment with minimum 45-50 micron powder coating., (ii) classroom desk medium sizesupply & installation medium desk (for two persons)-the overall dimensions of desk will be 900mm w 5 x 890mm d 5 x 688/420mm h 5 , complete as per specifications enclosed and direction of engineer-in- charge having the table top shall be made up of 18.0 mm thick plywood is 303 of mr grade osl (one side shall be laminated, and other side shall have balancer finish). table top dimensions shall be w 870 mm

Wendy House Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others