Latest wheel axle Tenders | Government wheel axle Tenders

Central Government / Public Sector

CTN :45066211

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - 03132604005 1)98110123 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 4 wheeler bvzc wagons, available on rails. 1) ser bvzc 85079560037,2) ecr bvzc 85100429647 , 3) special repair bvzc 85060294668 , 4) special repair bvzc 85070160038 , 5) er bvzc 85029671424 . location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2.knuckles,3.yokes, 4.draft gears, 5. striker castings (nt), 6.r.b wheel sets with axle boxs, 7.yoke pin support (1st plate), 8.yoke support plate(3rdplate),9. breake cylinder 300, 10. cut of angle cock ,11. cppb with control reservoir.12 .auxilary reservoir 75. 13. distributor valve ,14. yoke pin .15 draft gear follower.16.knuckle pin.17.knuckle thrower ds8no:0999603005. dt:.24.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.328 .mt sold by number basis only.05nos , delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45066213

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132604003 pl no 98110123 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 4 wheeler bvzc wagons, available on rails. 1) ner bvzc 85040700080 ,2) cr bvzc 85019660605 , 3) scr bvzc 85090160131, 4) special repair bvzc 85069760171 , 5) nfr bvzc 85050300898. location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2.knuckles,3.yokes, 4.draft gears, 5. striker castings (nt), 6.r.b wheel sets with axle boxs, 7.yoke pinsupport (1st plate), 8.yoke support plate(3rdplate),9. breake cylinder 300 . 10. cut of angle cock .11. cppb with control reservoir.12 .auxilary reservoir 75. 13. distributor valve ,14. yoke pin .15 draft gear follower.16.knuckle pin.17.knuckle thrower ds8no:0999603003. dt:.24.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.344.mt sold by number basis only. 05 nos. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45066214

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132604004 1)98110123 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 4 wheeler bvzc wagons, available on rails. 1) ecr bvzc 85100429685 ,2) wr bvzc 85080150319 , 3) nfr bvzc 85050301475 , 4) scr bvzc 85099654822 , 5) scr bvzc 85090160148 . location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2.knuckles,3.yokes, 4.draft gears, 5. striker castings (nt), 6.r.b wheel sets with axle box, 7.yoke pin support (1st plate), 8.yoke support plate(3rdplate),9. breake cylinder 300 . 10. cut of angle cock .11. cppb with control reservoir.12 .auxilary reservoir 75. 13. distributor valve ,14. yoke pin .15 draft gear follower.16.knuckle pin.17.knuckle thrower ds8no:0999603004. dt:.24.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.420.mt sold by number basis only.05nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45066216

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132604010 1)98110123 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 4 wheeler bvzc wagons, available on rails. 1) er bvzc 85029671103, 2) cr bvzc 85019860043 ,3 special repair bvzc 85069757157 ,4) scr bvzc 85090160070 ,5) wr bvzc 85080460012 . location road no.4 . at dump yard. rc items: 1.coupler bodies (nt), 2.knuckles,3.yokes, 4.draft gears, 5. striker castings (nt), 6.r.b wheel sets with axle boxs, 7.yoke pin support (1st plate), 8.yoke support plate(3rdplate),9. breake cylinder 300 . 10. cut of angle cock .11. cppb with control reservoir.12 .auxilary reservoir 75. 13. distributor valve ,14. yoke pin .15 draft gear follower.16.knuckle pin.17.knuckle thrower ds8no:0999603010. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.120.mt sold by number basis only. 05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government And Public Sector

CTN :45061681

22 May, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of slag cake kept all over the lot area with or without embedded ferrous and refractory items and with or without other material.note: (1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. collection of the material will be done from one end only as per delivery direction. (2) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks (3) oxy-cutting of big pieces of slag cake beyond truck body size will be permitted to accommodate the same inside the truck. (4) delivery on actual weighment basis (5) loading shall be done by purchaser at his own cost. (6) the purchaser can inspect the material on or before auction (7) prior delivery schedule shall be obtained by the purchaser from rwp/bela. location:in front of oxygen plant 48 feet distance east-west direction along p.c.c road and 49 feet distance in north- south direction.

Central Government And Public Sector

CTN :45061683

22 May, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of foundry slag kept all over the lot area with or without embedded ferrous and refractory items and with or without other material.location: in front of cooling tower 60 feet in east-west direction and 40 feet north-south direction.note: (1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. (2) loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts pipes, angles, channels, rods, sheets etc. and non-ferrous items are not permitted for delivery. (3) collection of the material will be done from one end only as per delivery direction. (4) oxy cutting of big pieces of slag beyond truck body size will be permitted to accommodate the same inside the truck. (5) the lot shall be delivered as is where is basis. (6) purchaser can inspect the materials thoroughly before e-auction. (7) delivery on actual weighment basis (8) loading shall be done by purchaser at his own cost. (9) prior delivery schedule shall be obtained by the purchaser from rwp/bela.

Central Government And Public Sector

CTN :45061684

22 May, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of slag cake kept all over the lot area with or without embedded ferrous and refractory items and with or without other material.note: (1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. collection of the material will be done from one end only as per delivery direction. (2) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks (3) oxy-cutting of big pieces of slag cake beyond truck body size will be permitted to accommodate the same inside the truck. (4) delivery on actual weighment basis (5) loading shall be done by purchaser at his own cost. (6) the purchaser can inspect the material on or before auction (7) prior delivery schedule shall be obtained by the purchaser from rwp/bela. location:back of steel melt shop, near peepal tree 62 feet north from east-west p.c.c road. east-west 59 feet and north-south distance 85 feet.

Central Government And Public Sector

CTN :45061685

22 May, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of slag cake kept all over the lot area with or without embedded ferrous and refractory items and with or without other material.note: (1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. collection of the material will be done from one end only as per delivery direction. (2) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks (3) oxy-cutting of big pieces of slag cake beyond truck body size will be permitted to accommodate the same inside the truck. (4) delivery on actual weighment basis (5) loading shall be done by purchaser at his own cost. (6) the purchaser can inspect the material on or before auction (7) prior delivery schedule shall be obtained by the purchaser from rwp/bela. location:in front of oxygen plant east-west 48 feet distance and 80 feet north-south along temporary road.

Central Government And Public Sector

CTN :45061686

22 May, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of slag cake kept all over the lot area with or without embedded ferrous and refractory items and with or without other material.note: (1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. collection of the material will be done from one end only as per delivery direction. (2) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks (3) oxy-cutting of big pieces of slag cake beyond truck body size will be permitted to accommodate the same inside the truck. (4) delivery on actual weighment basis (5) loading shall be done by purchaser at his own cost. (6) the purchaser can inspect the material on or before auction (7) prior delivery schedule shall be obtained by the purchaser from rwp/bela. location:in front of oxygen plant east-west 100 feet distance and north-south 64 feet distance.

Central Government And Public Sector

CTN :45061688

22 May, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of old ferrous foundry skull kept all over the lot area with or without embedded ferrous and refractory items and with or without other materials. note :(1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. (2)loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. (3) collection of the material will be done from one end only as per delivery direction. (4) oxy-cutting of big pieces of skull beyond truck body size will be permitted to accommodate the same inside the truck. (5) loading by the labour of purchaser. (6) loading shall be done by purchaser at his own cost. (7) the purchaser can inspect the material on or before auction. (8) prior delivery schedule shall be obtained by the purchaser from rwp/bela. (8) delivery on actual weighment basis (9) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. location: in front of water tank along east-west direction of pcc road 80 feet and north-south 70 feet along 18 feets kacchi road.

Wheel Axle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors