Latest wheel chair repair Tenders | Government wheel chair repair Tenders

State Government

CTN :40395227

04 Jul, 2025 NA

Birbhum - West Bengal

Tender For corrigendum : withdrawing lowering of submersible pump from high lift site to low lift river bed tube well site of maldanga water supply scheme under bolpur mechanical division, phe. dte.

State Government

CTN :40846830

17 Jul, 2025 NA

Asansol - West Bengal

Tender For sinking and installation of six nos. new riverbed tube well with 100 mm dia gi collecting main...twelve nos. filter bed of mechanical filter at dihika pump house under asansol municipal corporation. 2nd call

State Government

CTN :40573580

28 Jun, 2025 NA

Karur - Tamil Nadu

Tender For corrigendum : dismantling and erection of corroded pump bed and repairing of overhead pipeline in various areas at pulp mill - mechanical in tnpl unit - i

State Government

CTN :40615640

28 Jun, 2025 NA

Karur - Tamil Nadu

Tender For corrigendum : erection of protection shield for bed evaporator tubes in boiler # 6 at energy mechanical in tnpl unit - 1.

State Government

CTN :40772511

26 Jun, 2025 9.65 Lacs

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material, design, erection, testing, commissioning for providing s.o.p. to newly constructed residential building at nift campus chebb at kangra under esd no. i hpsebl, kangra. - (a) material/erection of 11/0.4kv,250 kva s/stn., prov.distribution transformer (ordinary), 11/0.4 kv, 250 kva, prov.steel tubular poles (9 m, working load > 200 kgf/m ), prov.x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, prov.ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov.x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov.x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for transformer bed, prov.x-arm [channel iron (100x50x5 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov.ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov.ms angle iron (35x35x6 mm), length : (460 ) x 2 nos, prov.ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov.ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov.ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov.go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov.d.o fuse unit, prov.surge arrester, 9 kv station class (porcelain type), prov.discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12kv, 90 kn) including dead end clamps etc.), prov.pipe earthing set, lt distribution panel box with mccb(630a, 50 ka, 3p,1 no) and mccb(250 a, 36ka, 3p, 3 no.), prov.half clamp (m.s. flat 50x6 mm), prov.full clamps (m.s. flat 50x6 mm), prov.nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], aluminium thimble, copper thimble 200 amp, danger plate, prov.barbed wire, prov.energy meter (3-phase,4-wire)dlms compliant 400/5a ct type, prov. aluminium paint., prov.aaac 7/3.15mm conductor for earthing, erection charges complete in all respect, transportation charges complete in all respect, (b)material/erection of 11 kv ht line, prov aaac 7/3.15mm conductor (50mm ) {includes cutting and wastage}, prov. steel tubular poles (9 m, working load > 200 kgf/m ), prov.m.s. c.i.x-arm (1500x100x50x5 mm), long for single pole, prov.m.s a.i x-arm (1800x50x50x6 mm), long for single pole, prov m.s a.i x-arm (50x50x6 mm), length (2x750) mm long for single pole, prov m.s a.i x-arm (50x50x6 mm),length (2x600) mm long for single pole, prov.m.s c. i cross arm (75x40x5 mm), length (2400) mm for g.o switch & d.o fuses, prov.belt set - ms a.i 50x50x6, length [2400 mm x 2 no.] for double pole, prov.x-bracing set - ms a.i 50x50x6, length [2700 mm x 2 no.]for double pole, prov 11 kv pin insulators (porcelain, 12 kv, 10 kn), prov disc insulator ,1 no disc (12 kv, 90 kn) including dead end clamps etc., prov ht earthing set complete, prov double continous earth wire (gi, 8 swg) @ 0.102 kg/m, prov danger plate (250x200x1.6 mm), prov nuts and bolts of various sizeswith flat and spring washers, prov barbed wire, prov aluminium paint, prov.full clamps (m.s. flat 50x6 mm), prov.xerox for chebb s/stn for scada, prov.d.o fuse unit, erection charges of 9 mtr st pole complete in all respect, erection charges of stay set complete in all respect, erection charges of coil earthing complete in all respect, erection charges of g.o. switch complete in all respect, erection charges of sagging aaac 7/3.15mm conductor, sagging of continous earth wire (gi, 8swg) @ 0.102 kg/m complete in all respect, transportation charges complete in all respect, commissioning of a 250 kva dtr plinth and fencing, earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds o

corporations/Associations/Others

CTN :40801661

30 Jun, 2025 3.00 Crore

Junagadh - Gujarat

Tender For yearly rate contract for various items of construction and supply for sutrapada, dist. gir somnath (second attempt) - excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter lead a for loose or soft soil, excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter lead b dense or hard soil, excavation for foundation for depth to 3.00 to 5.0 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter leadchard murrum, filling available excavated earthexcluding rockin trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidatind each deposited layer by ramming and watering, filling available excavated earthexcluding rockin trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering., white stone bela masonary block in course in super structure with stone of approved quality in cement mortar 1jem51 cement 5 course sandincluding racking the joint etc. complete., providing laying controlled cement concrete mper200 and curing complete including the cost of form work and excluding cost of reinforcement for reinforce concrete work in r.c.c. slab and landing, providing 15 mm thick cement plaster in single coat on fair side brickperconcrete walls fpr interior plastering up to floor two level and finished even and smooth with a floating coat of cement slurry. cement mortar 1jem41 cement 4 sand, providing and laying reinforcement for r.c.c. work and bending andplacing in position completed p to floor two level thermo mechanical treated barscrsas per i.s. standard, 20 mm thick sand faced cement plaster on walls up to height 10 meters above ground level consisting of 12 mm thick backing coat of c.m. 1jem31 cementjem 3 sandand 8 mm. thick finishing coat of c.m. 1jem11 cementjem 1 sandetc. complete., providing and laying ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1jem31percementjem 3percoarse sandfinishing with flush pointing in white cement.up to 10 ton, providing and laying coloured glazed tiles of the size 300mm x 200mm x 8mm per300mm x 450mm x 8mm in flooring treads of steps landings skirting risers of steps anddado on 10 mm thick cement plaster 1jem31percementjem 3percoarse sandandjointed with white cement slurry., providing and laying 24x 24 vitrified 8mm thick tiles flooring over 20mmaveragebase of cement mortar 1jem61 per cementjem 6percoarse sandon new surface of fixing on existing flooring by adhesive materials including dismantling of existing flooring and jointed with colour cement slurry including finished with flush pointing andcleaning the surface etc. complete for light shade, providing and laying granite slab in riser of steps dedo and pillars laid 10 mm thick cement mortar 1jem31 cement 3 sandand jointed with grey cement slurry including rubbing and polishing complete, providing and laying broken china mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1jem3 to plain or slope and to be tempered to bring mortar crme out up to surface using white cement including rounding off junctions and extending them up to 15cm along the wall clearing with water and oxalic acid etc. as directed, providing and fixing window having extruded aluminum colour anodized section frame main outer size 63.50 x 38.10 x 1.95 mmof jindal section nojem4605, wt 1.094 kg perrmt, horizontal two track member size 61.85 mm x 31.75 mm x 1.20mmof jindal section nojem 8687 wt. of 0.695 kgmt,vertical member of size 61.85 mm x 31.75mm x 1.30 mmof jindal section nojem8758 wt.of 0.0.659 kgpermtwith sliding shutters of horizontal member size 40mm x 18mm x 1.29mmof jindal section nojem 8949 wt.

Central Government/Public Sector

CTN :40754323

28 Jun, 2025 NA

Thiruvananthapuram - Kerala

Tender For supply of 2d echo machine , c arm machine modular , central monitoring system , emergency recovery trolley , fetal doppler , five part haematology auto analyzer with loader , fowler bed semi auto mechanical , fowler bed semi automatic cot , high end patient monitor , mobile x ray digital , modular ot , normal ward beds mechanical , portable hand held xray machine , tmt machine , ultrasound machine , usg with colour doppler , wheel chair , x ray 500 ma

State Government

CTN :40526420

21 Jun, 2025 NA

Karur - Tamil Nadu

Tender For corrigendum : erection of protection shield for bed evaporator tubes in boiler # 4, 5 and 6 at energy - mechanical - in tnpl unit - 1

State Government

CTN :40710096

20 Jun, 2025 NA

Jammu - Jammu And Kashmir

Tender For strengthening and modernization of existing farms by way of up gradation of stocking ponds 1 nos by way of raising of bed, replacement of bottom soil including wall lining and including mechanical works at fish farm nowabad jammu.

State Government

CTN :40649114

23 Jun, 2025 NA

Karur - Tamil Nadu

Tender For fabrication and erection of light structurals and replacement of pump cum drive motor bed in different departments type - h app-3 in causticizer plant at srp-mechanical in tnpl unit-i

Wheel Chair Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors