Latest wheel loader sale Tenders | Government wheel loader sale Tenders

Central Government/Public Sector

CTN :42126626

15 Oct, 2025 NA

Vadodara - Gujarat

Tender For supply of electronic toe load measuring device (etlmd)

CTN :41577585

10 Oct, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : e03-cardiology consumables ptca accessories/drugs - ptca wire torquers, guide wire torquer, ptca introducer needle (y connector compatible), push only - torque minimal catheters, push only - torque minimal catheters, push only - torque minimal catheters, push only - torque minimal catheters, torqueable braided microcatheters, torqueable braided microcatheters, torqueable braided microcatheters, dual lumen and side branch acccess microcatheters, dual lumen and side branch acccess microcatheters, guide extension catheters, guide extension catheters, guide extension catheters, thrombus aspiration catheter, thrombus aspiration catheter, thrombus aspiration catheter, low tip load cto wires ( 1.0 gf), low tip load cto wires ( 1.0 gf), low tip load cto wires ( 1.0 gf), medium tip load wires (1.0 3.0 gf), medium tip load wires (1.0 3.0 gf), medium tip load wires (1.0 3.0 gf), medium tip load wires (1.0 3.0 gf), high tip load wire ( 4.0 gf), high tip load wire ( 4.0 gf), high tip load wire ( 4.0 gf), cto support wire, re entry / support / externilisation wires, re entry / support / externilisation wires, re entry / support / externilisation wires, re entry / support / externilisation wires, re entry / support / externilisation wires, cto speciality balloon, cto speciality balloon, cto speciality balloon, workhorse coronary guidewires, workhorse coronary guidewires, workhorse coronary guidewires, workhorse coronary guidewires, workhorse coronary guidewires, workhorse coronary guidewires, workhorse coronary guidewires, ffr guide wires, ffr guide wires, ffr guide wires, ivus / hd ivus catheter, ivus / hd ivus catheter, coronary oct (optical cohorence tomography) catheter, rotational atherectomy(complete set), orbital atherectomy device (complete set), ivl balloon (set), ecg electrodes, ecg electrodes, ecg electrodes - pediatric, j-tip teflon coated wire (0.035), straight tip teflon wire (0.035), straight tip teflon wire (0.032), exchange-length ptfe wire, superstiff / extrastiff wire, hydrophilic wire, support wire

Central Government / Public Sector

CTN :42127416

15 Oct, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of crank pin along with pin and split pins as per rdso drg.no. empty load device ir-eld-10 wd84074-s-01-rc, alt.3, item nos-6,7,8 &10. (ref. drg.nos for item no;s 6,7 is wd-84074-s-02 rc, alt.1, item nos.10&8).

Central Government/Public Sector

CTN :42095012

20 Oct, 2025 NA

Jorhat - Assam

Tender For supply of consumables for construction of hybrid energy device - mild steel sheet, 8ft x 4ft x 1.2 mm, mild steel angle rod, 1.5 inch x 20 ft, mild steel angle rod, 1 inch x 20 ft, mild steel welding rod, diameter: 3.15 mm, mild steel perforated sheet, 8ft x 4ft x 1.2 mm., stainless steel 304 sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 perforated sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 pipe, 1.5 inch dia, 1.5 inch dia, 1.2 mm, 20 ft, zinc alloy door handle lock, stainless steel 304 welding rod, 2.5 mm diameter, ceramic fibre blanket insulation, 24"x12"x1", ceramic fibre rope, 10 mm diameter, 30 m length, heat insulating gasket, 8 ft x 4 ft, 5mm thickness, heat resistant spray paint 225 ml, silicon pipe 1/2 inch inner dia, 10 m, high temperature silicon hose pipe, 2 inch inner dia, 12 feet, worm-drive tubing clamps.chrome steel, hose clamp, 1/2 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 1 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 2 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 3 inch dia, galvanized mild steel set of nut, bolt and washer, 8 mm diameter, 2 inch length, temperature sensor with digital display, k type, 0-1250 с, adruino uno r3 development board, rod heater, 8.2 mm diameter, 12 inch length, quartz furnace observation glass, temperature: 1200 °c, 10 em diameter, 5 mm thickness, copper tube 1/2 inch dia, 23 swg, copper electric wire 6 sq. mm, 90 m, copper electric wire 2.5 sq. mm, 90 m, mcb dp 32 a, electric socket 16 a, electric plug 16 a, combined box 20 a, anabond gasket maker 85 g, heavy load caster swivel diameter: 100 mm, galvanized iron pipe b class diameter: 1.5 inch, length: 40 ft, galvanized iron pipe b class diameter: 1/2 inch, length: 20, galvanized iron pipe b class diameter: 3/4 inch, length: 20 a, stainless steel 304 ball valve diameter: 1.5 inch, stainless steel 304 ball valve diameter: 3/4 inch, stainless steel 304 hall valve diameter: 1/2 inch, check valve, brass diameter: 1.5 inch, check valve, brass diameter: 3/4 inch, check valve, brass diameter: 1/2 inch, metal cutter grinder disc, pack of 10, grit number 220, diameter: 4 inch, grit material: aluminium oxide, metal cutter grinding wheel, pack of 5, grit number 4., diameter: 4 inch, grit material: aluminium oxide, flap disc, pack of 10, grit number 80, diameter: 4 inch, grit material: aluminium oxide, flexible heavy duty 3 layer pvc water pipe, diameter: % inch, length: 30 m, teflon tape for plumbing, pack of 10, 12 mm thick and 10 m length, heat resistant gloves, material: leather, size: 30.48 cm, nitrile disposable hand gloves, pack of 50 pieces, size: l, 150 microfarad capacitor, 230 v, 150 microfarad, 230 v, anti vibration rubber ribbed pads, pack of 4, 150mm x 150mm x 12mm, square pillow block bearing ucf204, 20 mm diameter, inner ball mounted pillow block insert bearing kp08, 8 mim bore, step down transformer, 220v ac to 12-0-12 v.1.5a, single strand wire, diameter 0.51mm,5m, moc3021 moc 3021 optocoupler, bta16-600b triac, 600v 16a, switch. sw-spst, in4007 diode, 100%via, bldc motor with compatible e-bike controller, 48v 900w 3300rpm, lithium-ion battery, a grade 3.2v 2000mah (5c), battery management system, li-ion 135 48v 20a, nickel strip, 0.2 mm thickness, 10 mm width, 5 m length, silicon wire, 12awg, insulation paper, 65mm, glue gun, 40 w, spot welding rod 5000 w, cpu fan 12 v dc, thermoelectric generator (teg), 150°c, module., configuration: sp1848-27145, tungsten rhenium thermocouple, minimum temperature reading: 0°c, maximum temperature reading: between 2300°c and 2871°c, max31856 instrumentation amplifier,, resolution: 0.0078125°c, supply voltage: 3.3v to 5v, arduino uno r3 with adapter cable, miniature circuit breaker fuse, d type, 32 a, power rocker switch, voltage rating: 24 vdc, current, rating: 14 ma, 19mm size red power symbol led s.s. momentary type, push button switch 5v-24v dc, potentiometers 100 kohm, potentiometers 1 m ohm, relay module-(ssr-2 channel), 2 chann

Central Government/Public Sector

CTN :41489566

13 Oct, 2025 1.00 Crore

Noida - Uttar Pradesh

Tender For corrigendum : open tender document for e-procurement of laboratory equipment (soil, aggregates, cement, reinforcing bar, concrete test equipment, water, geo-textile and geogrid) for material testing laboratory of iahe - soil, unconfined compressive strengthcompression device with digital load frame: hydraulic proving ring, dial gauge vernier callipers, timer, oven, weighing balance, shear strength vane shear apparatus, grain size analysis as per is:2720 (part- iv)pipette apparatus (i) sampling pipette (ii) glass sedimentation tubes (iii) weighing bottles (iv) deleted (v) stirring apparatus (vi) sieves -2mm, 425umm , 75umm is sieves (vii) deleted, specific gravityhydrometer apparatus: two 1000 ml graduated cylinders, dispersing agent solution containing sodiumhexa-metaphosphate, dessicator and centimetre scale., shrinkage limit testfull set of equipments 1.) evaporating dish of porcelain, 2.) spatula and straight edge, 3.) balance-sensitive to 0.01 g minimum.4.) shrinkage dish. circular, porcelain or non-corroding metal dish, 5.) glass cup. 50-55 mm in diameter and 25 mm in height,6.) glass plates. two, 75x75 mm one plate of plain glass and the other prongs, 7.) thermostatically controlled oven,8.) wash bottle containing distilled water, 9.) graduate-glass, with capacity of 25 ml. 10.) mercury., sand equivalent value(i) graduated cylinder (ii) irrigator tube (iii) siphon assembly (iv) weighted foot assembly (v) measuring can (vi) sieve -4.75mm (vii) funnel (viii) 4- litre bottle (ix) flat pan (x) timing device (xi) sand equivalent shaker, ph test -electronic method(i) ph meter (ii) digital balance 300 gm capacity-sensitive 0.001gm (iii) 100ml glass beaker -3nos. (iv) volumetric flask-500ml -nos. (v) wash bottle-100 ml (vi) mortar with rubber covered pestle, aggregates, polished stone value (i) accelerated polish machine mounted on firm ,level and non resilient base of stone or concrete (ii) road wheel (iii) means for rotating road wheel (iv) means for bringing the surface of a rubber-tyred wheel of 20 cm diameter and 5 cm breadth to bear on the stone surface of the road wheel with a total load of 40 kg. (v) means to feed the sand and water at a uniform rate (vi ) means to feed the emery powder and water at uniform rate (vii) friction tester: is: 2386 part 4 as per specification of rrl uk (viii) 25 kg hard siliceous sand (ix) emery powder 5 kg, alkali aggregate reactivitymortar bar method: scales, weights, sieves, glass graduates, specimen moulds, mixing bowl, tamper, trowel, containers, length comparator, alkali aggregate reactivity chemical method:1. electronic balance2. pulveriser3. reaction container, reagents, glassware, petrographic examination 1. geological hammer2. petrographic microscope3. screen confirming to is sieve4. digital balance5. portable handheld cutting machine6. hand lens7. glass sides etc., deleterious material & organic impuritiessedimentation pipette: a watertight screw-topped glass jar, 1000 ml measuring cylinder, chemicals, containers, sieves, cement, soundness (autoclave apparatus)graduated glass cylinders, moulds, autoclave, length comparator, compaction (mortar cube vibrator), fineness (blaine air permeability apparatus), ph meter ( 2 in nos.), reinforcing bar (steel), reinforcing bar (steel) universal testing machine,to determine unit weight, yield strength,, proof stress, ultimate tensile strength, % elongation, bend and re-bend test, concrete test equipment, vibrating table 1mx1m(full set of equipments), needle vibrator ( 2 in nos.), permeability, dry shrinkage (shrinkage apparatus) ( 2 in nos.)(full set of equipments), air content (air entrainment meter apparatus)(full set of equipments), durability (rapid chloride ion permissibility apparatus), depth of penetration (water permeability apparatus) ( 2 in nos.)(full set of equipments), water, physical analysis of water, geo textile and geogrid, pull-out resistance of geotextile /geogrid

Central Government / Public Sector

CTN :42105922

20 Oct, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of disconnecting and earthing device, 8 pole, 2 way without off, on load 125 amps at 1000 v ac, 2 no+ 2nc and with heavy duty handle and pad locking arrangement in one position mounted in a stainless steel enclosure suitable for ac 23 duty confirming to iec 60947, max depth including handle 480 mm for lhb ac coaches as per rdso spec. no. rdso/pe/spec/ac/0184-2015 (rev.1) or latest, rdso/pe/spec/ac/0192-2018 rev.0 or latest & rdso/pe/spec/ac/0200-2020 rev.0 and rdso letter no. el.71.1.108/mssbc, dt, 17.09.21 & 11.10.2022.

Central Government/Public Sector

CTN :42106341

12 Nov, 2025 NA

Dahod - Gujarat

Tender For supply of load sensing device for container flat wagon

Central Government / Public Sector

CTN :42087253

08 Oct, 2025 NA

Sambalpur - Odisha

Tender For supply of electronic toe load measuring device (etlmd) no.tm/sm/etlmd/218 (fourth revision - 2022) as per attached annexure-a make/brand: pujara engineers. [ warranty period: 30 months after the dateof delivery ]

Central Government / Public Sector

CTN :41673688

01 Oct, 2025 NA

Waltair - Andhra Pradesh

Tender For supply of electronic toe load measuring device as per rdso specification.

CTN :42031936

27 Oct, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of electronic toe load measuring device rd [ electronic toe load measuring device rdso spec. no. tm/sm/etlmd/218 (fourth revision - 2022)]

Wheel Loader Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors