Latest wheelchair frames Tenders | Government wheelchair frames Tenders

State Government

CTN :41713719

11 Sep, 2025 8.17 Lacs

Belonia - Tripura

Tender For providing and fitting fixing of electrical accessories, spare of panel board of different water supply schemes at different locations under dws sub-division, belonia during the year 2025-26. - providing and fitting fixing of spare contact kits without coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., providing and fitting fixing of standard operating coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., supplying and fitting fixing of 4 pole ac control contactor (nhd series) suitable for bch made starter (standard coil voltages are 24, 110, 220/240 & 380/415 v, ac hz)., supplying and fitting fixing of 3 pole power contractor (type-mnx) suitable for 10 hp to 25 hp motor.mnx-25 (for l&t made starter), supplying and fitting fixing of pneumatic timer pn type delay relay-electro pneumatic) suitable for delay of time upto 30 sec. (bch made)., supplying and fitting fixing electronic timer type st-100 (l & t make) suitable for 240/300/415v, 50 hz having ranges for 3-30 secs/12-120 secs., supplying and fitting fixing of single phase preventer on delay 2 sec off delay 7 sec 65 vac asymmetry., providing & supplying of kit-kat rewireable porcelain fuse (cut-out) carrier & base of havells made (delux quality)., a) 63 amps/415 volt, b) 100 amps/415 volt, supplying and fitting fixing of 3 pole power contractor (type-ml) suitable for 10 hp to 25 hp motor.type ml-2 (for l&t make starter), supplying and fitting fixing of thermal timer type gt-200 (l & t make) suitable for 230/250v, 360v, 400/440v, 50 hz for 5-18 secs., supplying and fitting fixing of thermal overload relays mn2 type (directly operated& direct mounting on mnx 9-40 contactor) of l & t made. (suitable for ml/mnx type)., a) for relay range 9-15 a., b) for relay range 14-23 a., c) for relay range 20-33 a., supplying and fitting fixing of thermal overload relays (directly operated& direct mounting on ml-2/3 contactor) having relay range 9-14a/13-21a of l & t made. (suitable for ml-2/ml-3 type)., supplying and fitting fixing of citation-m overload relays (direct mounting with built in single phase protection) having relay range of bch made., a) for relay range 8.9-13.5 a., b) for relay range 13.2-30.00 a/17.4-24.00 a., c) for relay range 22.00-30.00 a., providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) gamair wood/ plywood pannel board for fitting fixing of electrical items, in/c 2 nos ms angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the engineer-in-charge., providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the engineer-in-charge., providing and fitting fixing heavy duty box type (resin filled) power factor correction capacitor l & t make etc. complete as per specification and direction of the engineer-in-charge.i) 5-15 kvar 440 v, supplying isi marked/ taparia make tools for water supply scheme., i) sly wrench, ii) screw driver, iii. pipe wrench, iv. plier, v. hexo frame with blade, providing and fitting fixing of moving iron type, range 0-500 v, 96 mm x 96 mm size ac volt meter ( l & t / ae make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the engineer-in-charge., providing and fitting fixing of moving iron type, range 0-100/0-200 amp, 96 mm x 96 mm size ac amps meter direct reading type ( l & t / ae make) with selector switch and ct coil as a electrical instrument of the pannel board as per specification and direction of the engineerin-charge., providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses), tripl

Central Government And Public Sector

CTN :41727322

06 Oct, 2025 NA

Multi City - Multi State

Tender For supply of 1) auto-pointing reflector-less electronic total station, auto-pointing of 1000 mtrs, colourlcdtouch screen dual face display, 0.5 second least count and 1 second accuracy, capable of measuring approximate 1000 mtrs in reflector-less mode and approximate 6 kms under good weather conditions with single prism, with an accuracy of (1 mm + 2 ppm xd) in prism mode, internal memory of 1 gb, with data interface such as usb flash memory for pen drive and usb type mini b port, guide light unit to assist in quick setting out, graphical display of surveyed points, comes along with the following accessories: (i) main unit. (ii)rechargeable batteries x2. (iii) quick charger with power cable, stylus, lens hood, lens cap, (iv) tool kit operations manual and carrying case. (v) pen drive. (vi) companyoriginal calibration certificate & warranty card. 2) wooden telescopic tripod. 3) single range pole assembly, consisting of prism, single tilting mountwith co-axial target, telescopic range pole, range pole level and all in soft carrying case. 4) range pole tripod for prism. model-ix-601 of make sokkia or similar. [ warranty period: 24 months after the date of delivery ]

Central Government/Public Sector

CTN :41707925

25 Sep, 2025 30.00 Lacs

Pune - Maharashtra

Tender For tender for supply of procurment and installation of frangiable mast for airports : : - 10m frangible lattice with mounting accessories tool set to operate rope for tilting foundation bolts and mounting bolts etc all items required for its safe installation , frp abs enclosure type i with cooling fan vent with filter with rain shroud 1 set as per annexure iv aiv 1 aiv 2 , frp abs enclosure type ii with cooling fan vent with filter with rain shroud 1 set as per annexure iv aiv 1 aiv 3 , mounting arms 1215mm x 90mm or suitable for mounting fsm type rvr sensor temperature sensor radiation shield at 1 point 2 to 2m height from base , pipe assembly for ultra sonic wind sensor diameter 51mm and length 650mm or suitable , 230v led obstruction light for airport application , lightning arrester one set as per annexure i , frangibility certificate as per specification , drawing , din rail 3 nos , din mountable 5amps sockets 5nos , din mountable single pole mcb 2 nos , din mountable earth terminals 1no , cable tracks 2 nos , light inside enclosure 1 no , din rail 2 nos , din mountable surge protector 1 no , din mountable voltmeter 1 no , din mountable 5amps sockets 2 nos , din mountable earth terminals 1no , din mountable dual pole mcb 1 no , din mountable single pole mcb 3 nos , cable tracks 2 nos , light inside enclosure 1 no , insurance freight packing , installation charges for lattice lightning arrester and earthing for instruments as per specifications per site , 2 point 5 m frangible pole with mounting accessories , foundation bolts and mounting bolts etc all items required for its safe installation , frp abs enclosure with cooling fan vent with filter with rain shroud as per annexure ii aii 1 aii 2 , mounting base clamp with slotted holes for fsm type rvr sensor universal mounting kit , frangibility certificate as per specification , drawing , din rails 3 no , din mountable surge protector 1 no , din mountable dual pole mcb 1 no , din mountable single pole mcb 3 nos , din mountable voltmeter 1 no , din mountable 5 amps sockets 5 no , din mountable earth terminals 2 nos , cable tracks 2 nos , light for enclosure 1 no , insurance freight packing , installation charges for pole and earthing for instruments as per specifications

corporations/Associations/Others

CTN :41704973

12 Sep, 2025 NA

Multi City - Multi State

Tender For auction sale of accacia i b,accacia ii b,mango tree,miscellaneous fire wood,teak pole ii,teak pole iii,teak pole iv,teak pole v,teak polev,tbbs,teak billet below specification,teak -iiic,teak pole ivc,teak vc,teak short log

State Government

CTN :41622623

05 Sep, 2025 NA

Dubrajpur - West Bengal

Tender For maintenance of led rope light arounded to existing 6m octagonal pole (main road )i) high road adjacent dubrajpur direction to tilpara high road ii) hatzanbazar to bus stand iii) benimadhab more to karidhya high road iv) s.p more to kalputaru pally

Central Government/Public Sector

CTN :41587948

16 Sep, 2025 NA

Bangalore - Karnataka

Tender For supply of ot table with 5 year warranty , arm board , body strap , anaesthesia screen with clamps , iv pole with clamp with 4 hook , mayo instrument tray with stand , gas spring assisted split leg plate , gas spring assisted tiltable head rest , goepel knee crutches , lateral support with pad rotatable with clamp , park bench positioning arm board , pubis support with pad rotatable with clamp , side rail clamp, multi-type , 1000 mm table extension made of carbon fiber with mattress , extra remote controller , table attachment for head rest , prone helmet , disposable face mask for prone helmet , 4-point radiolucent spinal frame for lordosis positioning with extension , radiolucent wilson frame , side rail attachment for caron fiber extension , u shaped gel pad for head res , ring gel pad for head rest , multi-utility gel bolster for chest , multi-utility gel bolster for sacrum iliac crest , leg gel pads , knee gel pads , multipurpose 3pin head frame complete set , universal head clamp fixing bracket for mayfield or doro , three pin standard holder to fix the skull clamp mayfield or doro , three pin connection clamp for rotation adjustment of the skull clamp mayfield or doro , three pin skull clamp for securing the head during neurosurgical operations mayfield or doro , reusable pins for skull clamp adult mayfield or doro , reusable pins for skull clamp child mayfield or doro , gel prone head rest adolescents and adults , gel head ring closed adult and pediatric , crossbar adaptor for sitting position with clamp , carbon fibre back plate 1200mm length

corporations/Associations/Others

CTN :41581030

26 Sep, 2025 5.19 Crore

Multi City - Karnataka

Tender For supply of auto electrical items to divisions of nwkrtc - commuter end shield - 268, pole housing bs6 leyland - 267, tata bsiv fixing bracket - 266, tata bsiv i b bracket - 265, tata bsiv bush kit for starter - 264, ud starter solenoid switch (17size nut) (protolite) - 263, ud starter relay (protolite) - 262, ud starter drive teeth (protolite) - 261, ud starter brush gear (protolite) - 260, ud starter armature with bearing (protolite) - 259, ud a/c alternator fan (protolite) - 258, ud a/c alternator repair kit (protolite) - 257, ud engne alternator repair kit (protolite) - 256, ud engne alternator fan (protolite) - 255, ud engne alternator slip ring (protolite) - 254, ce bush for midi bosch - 253, de bush for midi bosch - 252, egt kit for midi leyland lucas - 251, hexagonal screw - 250, orc drive - 249, solenoid switch - 248, fork lever - 247, c e bracket - 246, d e bracket - 245, retaining washer - 244, planetary gear train - 243, sealing cap - 242, c e bracket - 241, d e bracket - 240, c e bracket - 239, solenoid switch - 238, solenoid switch - 237, pulley twin groove - 236, d e bracket assy bs iii - 235, sre bracket assy - 234, ce bracket assy midi ll - 233, worm wh assembly - 232, volvo mxl wheel set for starter - 231, volvo mxl relay for starter - 230, volvo mxl regulator assembly - 229, volvo mxl rectifier assembly - 228, volvo mxl pole housing with coil - 227, volvo mxl pinion for starter - 226, volvo mxl engaging gear lever for starter - 225, volvo mxl drive with sahft assembly - 224, volvo mxl drive lock kit - 223, volvo mxl drive assembly - 222, volvo mxl d e shield - 221, volvo mxl brush gear assembly - 220, volvo mxl b9r stater for alternator - 219, volvo mxl b9r solenoid switch - 218, volvo mxl b9r small bearing for alternator - 217, volvo mxl b9r rotor assembly - 216, volvo mxl b9r regulator assembly - 215, volvo mxl b9r rectifier assembly - 214, volvo mxl b9r big bearing for alternator - 213, volvo mxl b9r bearing fitting cap - 212, volvo mxl b9r armature with brg - 211, volvo mxl b11r small bearing - 210, volvo mxl b11r regulator assembly - 209, volvo mxl b11r rectifier assembly - 208, volvo mxl b11r big bearing - 207, volvo mxl b11r bearing fitting cap - 206, volvo mxl b11 rotar assembly - 205, volvo b11r stator for alternator - 204, ud engine stator (protolite) - 203, ud engine rotor (protolite) - 202, ud a/c stator (protolite) - 201, ud engine starter assembly. (protolite) - 200, ud a/c rotor assembly (protolite) - 199, ud a/c regulator box assembly (prestolite) - 198, ud engine regulator box assembly (prestolite) - 197, ud a/c rectifier assembly (prestolite) - 196, ud engine rectifier assembly (prestolite) - 195, ud starter drive assembly with egt (gear train) (prestolite) - 194, ud starter pole housing with filed coil - 193, ud engine alternator assembly. (protolite) - 192, ud engine de shield (protolite) - 191, ud a/c de shield (protolite) - 190, ud de bearing nsk make - 189, ud de bearing nsk make - 188, ud corbon brush (engine alternator) - 187, ud engine ce shield (prestolite) - 186, ud a/c ce shield (prestolite) - 185, ud ce bearing nsk make - 184, ud a/c alternator corbon brush with holder (prestolite) - 183, ud a/c alternator assembly. (protolite) - 182, through stud - 181, through bolt - 180, tc stator assembly - 179, tc solenoid switch (2696 4030 a) - 178, tc solenoid switch - 177, tc rotor assembly - 176, tc regulator assembly - 175, tc rectifier assembly - 174, tc rectifier assembly - 173, tc pully (8 groove) - 172, tc pole screw - 171, tc main field coil assembly - 170, tc lever & peg assembly/ engaging lever - 169, tc bs-iv stator for alternator - 168, tc bs-iv stator - 167, tc bs-iv rotor - 166, tc bs-iv i b bracket - 165, tc bs-iv fixing bracket - 164, tc bs-iv field coil - 163, tc bs-iv drive assembly - 162, tc bs-iv de bracket - 161, tc bs-iv armature - 160, tc bs-iii regulator - 159, tc bs-iii rectifier assembly - 158, tc bs-iii field coil - 157, tc bs-iii bearing bush assembly - 156,

Central Government/Public Sector

CTN :41507722

10 Sep, 2025 4.22 Lacs

Porbandar - Gujarat

Tender For defect rectification on various electrical and hull defects onboard icgs c-445 - h-215: 04 in nos partition to be provided in computer rack for storage of file and books. in way jobs include;-(a) relocation of television.(b) 04 nos partitions in ss rack., h-212:08 nos ladder steps in main alleyway ladder found cracked and worn out. steps to be renewed with anti-slip grips as per sample. nut bolts of steps to be renewed.qty -08 nos, material-al., h-217: 01 in no sofa for sitting arrangement in wardroom to be fabricated and fitted. job include:(i) fabrication of 01 in no sofa as per sample.(ii) fitment of sofa in position.(iii) removal and fitment of existing fitting racks.(iv) fabrication of sofa covers. (v) rearrange of dining table. sofa size- 2500 x 500 x 350 mm, l-077: base plate, rotary volume switch socket and junction box of 02 in nos main broadcast system speakers at bridge top and quarterdeck deteriorated due to weathering. mb speakers to be disconnected from junction box and fabrication of base plate, socket and junction box to be carried out, connectorisation of speakers to be done and mb system to be proved for satisfactory operation. specifications of base plate, rotary switch and junction box are as follows:- (a) base plate- 24cmx14cmx10cm, mat-ms is- 513, powder coated.(b) junction box- 9.5cmx8.5cmx6.5cm, mat- ms is-513, powder coated.(c) rotary volume switch-1 pole, 5 way, h-216: chalk test of main engine ventilation flap air tight door observed suboptimal. minor crack and pitting observed on aluminium flap and frame. defect to be rectified by renewal of ventilation flap including cutting and metal buildup of frame. chalk test to be proved. in way jobs includes removal, fitment, machining, welding of door and frame. door size-(1000 x 2000 mm). ventilation door -01 no, mat - al., h-218: aluminum rack for storage in waterjet compartment to be fabricated as per sample. material-aluminum. size- (l x b x h) (3ft x 2ft x 1ft)., h-219: storage box to be fabricated for storage of machinery spares in waterjet compartment (mat- al, qty - 01 no, size - 100 cm x 50 cm x 50 cm)., 01 in no ba controller board to be fabricated as per sample. material : wood/ sunmica.

Wheelchair Frames Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors