Latest winch Tenders | Government winch Tenders

corporations/Associations/Others

CTN :45225513

20 Jun, 2026 NA

Luckwada - Chhattisgarh

Tender For corrigendum : supply of 2200010067 electric winch machine 15 ton capacity , 2200000361 motorized winch-bc315

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

CTN :45314968

03 Jun, 2026 NA

Kurnool - Andhra Pradesh

Tender For repairing of winch machine,guide pulley assembly and installing new main roller assembly,power generator at guntanala dam, chitrakoot

CTN :45314979

03 Jun, 2026 NA

Mahoba - Uttar Pradesh

Tender For repairing of winch machine and guide pulley assembly of urmil dam, mahoba

CTN :45319828

04 Jun, 2026 NA

Palakkad - Kerala

Tender For supply of 130175550014 -winch frame assy

CTN :45282015

01 Jun, 2026 1.47 Crore

Imphal - Manipur

Tender For supply of a portable shelter , arrangement for transportation , steel structur , electricla items , external elect store , furniture items - shs 100 x 100x 4.0 mm thick. make: sail /tata / apollo / equivalent isi marked, shs 50 x 50x 2.00 mm thick. make: sail /tata / apollo / equivalent isi marked, rhs 100 x 50x 4.05 mm thick. make: sail /tata / apollo / equivalent isi marked, ms plate 20 swg /1 mm thick as in wall (outer body), ms plate 18 swg /1.22 mm thick as in roof (outer body), ms plate 26 swg /0.46 mm thick as in secondary outer body., 4 mm thick acp sheet (inner) (make alstone/eurobond/ aludecor/ alstrong), hybrid (poly-isocyanate) pir panel insulation shall be provided using 45 mm thick density of 48 kg/m³ with aluminum foil one side, hdf laminated wooden flooring 8 mm thick (make - action tesla/centurry/pergo/greenpanel/micasa), 19mm thick ply make: kitply / green ply / century ply, steel doors: one number of door of size 900mm x 1800mm with inside opening shall be provided with complete accessories., steel doors: one number of door of size 900mm x 2100mm with inside opening shall be provided with complete accessories., detachable ms steps: 1x ms steps of size 600 x 300 mm 6 tier of steps made up of ms angle of size 40mm x 40mm x4mm (wt not less than 4.20 kg/m) would be provided. reference drawing as directed and approved make: sail/tata/jindal, pop rivet 3m x ½”, pop rivet 4m x ½”, welding rod n. 10, primer paint, ir absorbent paint camouflage pattern, metal putty, rubber solution, hydraulic jack with rubber hoses and fittings, electrically operated winch assy, jack side support 2 ton, map boards 6' x 6' with all accessories, vps / projector system stand, canvas cover 30'x30', 3 kg fire extinguisher & fire ball, self screw 25x1, multi spectral camoflauge net, led concealed light 9’’ x 9”x 22 watt, make- havells/ bajaj/ crompton), entrance light (bucket light), ac starter with fittings and mcb, single core wire 2.5mm, single core wire 1.5mm, single core wire 1 mm, insulation tape, modular s/w with cover on/off 5/15, socket 5 amps 3 pin, socket 15 amps 3 pin, switch boards 10 “ x 10”, switch boards 6” x 6” & 6” x 3”, exhaust fan 300mm, work station/ partition, wall mounted fan 450mm, focus / spot light for mapboards, hdmi cable for projector, led screen (sonic view / equivalent) 65'" (164 cm) with modular stand 4k ultra hd (3840 x 2160) etc. make - samsung / sony, de-humidifier 1.5 ton with stablizer and complete fittings etc. make- voltas/ daikin/lg/blue star/ panasonic., electric connections. cables to be used should isi marked of make havells/ crompton greeves/ plaza , fire retardant material. 1.5 sqmm cable to be used in all light points and 2.5 sqmm cable to be used in power points. 18 watt & 11 watt leds of make: cromptongreaves/bajaj/havells/syska . shall be provided at all light points. all switches to be used should be of 6 amp modular type of havells/anchor /crompton greeves/ general electric. the fwg electric connections shall be provided for :-, (ii) power point of 5 pin15 amp socket and 8 nos switch combination of modular type all switch point will be modular type will be provided as approved of make crompton greave/bajaj/havells ., (iii) concealed conduits will be provided for cabling in the portable shelter set of pvc insulated cable 1.5/2.5 sqmm multistanded copper conductor single core 1100v, grade conforming to is 649/1990 of make havells/finolex/plaza, (iv) mcb dp 32amps conforming to is 8828-1996 make crompton greave/ bajaj/havells, (v) miniature circuit breaker (mcb) 6 amp to 32 amps (single pole) make : crompton reave/bajaj/havells., (vi) change over over 63 amps, 3 pole of make: crompton greave/bajaj/havells., cable jointing kit for 11kv (earthed) grade cable for straight through heat shrinkage type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminum conductor cable of size 16 sqmm to 35 sqmm, power backup (ups/ inverter system) capacity 3

Central Government/Public Sector

CTN :45283524

27 May, 2026 NA

Bokaro - Jharkhand

Tender For supply of seal kit f/rev. winch tel. cyl;b-1&2(1items) comprising of following: 1 - seal kit f/rev. winch tel. cyl;b-1&2 ,

Central Government/Public Sector

CTN :45269837

28 May, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 17 )items as given below ,[1] replcg,tube 2095.000 m,[2] rprg,tube 1000.000 ea,[3] fab, ern of rail end buffers 70.000 ea,[4] rprg of brg housing 70.000 ea,[5] ultrasonic testng, repaired steel ladle 70.000 ea,[6] disman,fixg&alignment,impeller 1.000 ea,[7] rprg,id fan casing 3.000 to,[8] replcg,mtr bearing 2.000 ea,[9] fixg,mtr&drive alignment 1.000 set,[10] chng,g/box oil of skip winch 1.000 ea,[11] testing and commissioning 1.000 ea,[12] replcg,drain pipe 1.000 ea,[13] fitg,suction pipe 1.000 ea,[14] rprg,under grate damper,bearer bar etc 2.000 set,[15] miscellaneous technological cleaning 360.000 tag,[16] clamping & unclamping of jobs at m/c 100.000 nos,[17] maint,greasng & replacement of lt motors 8.000 nos

Central Government/Public Sector

CTN :45270170

11 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For construction of pit wheel lathe shed near sick line gwalior under aden/gwl in connection with "supply, installation and commissioning of cnc under floor wheel lathe (bg) with shed and winch on turnkey basis (01 nos) for jhansi division".

CTN :45244994

26 May, 2026 1.66 Lacs

Kottayam - Kerala

Tender For supply and installation of 8 mtr winch operated mini mast system with 4 x 150w led flood light at kattuvettikkal junction ward 10 in ayrkunnam gp, pallom block panchayath, kottayam district under mplads 2025-26 of adv k francis george mp

Winch Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector