Get complete information related to latest Wind Sock Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Wind Sock Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Wind Sock Tenders.
Tender For corrigendum : requirement of safety, rescue & security items for ssctps fy 2025-26,suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap , gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch) , barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5 , chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160 , acid/ alkali proof gloves having size of 18 inch with palm m , normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton , fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics , safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white , safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green , impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003 , foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592 , carry sheet (stretcher) l x b: 212 x 75 cm with self weight 1 kg, load limit 159 kg, lift type: horizontal , wind indicator made of light weight pu coated nylon material. double stitch at all joints. , plastic eyelets gives anticorrosion proper-ties. the complete windsock comes with a polymer packing. 2" dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe. , ear plugs corded epsav-570 , nose/ dust mask rpsav-p2 , flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164 , vapour respirator with head stripes to accommodate twin cartridges with exhalation valve , safety net consisting of pp rope dia: 4mm, mesh size: 100 mm, outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr , ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a) , heat shield hand gloves made of normal and tannedsplit leather of reddish-brown colour. , insulating thermalbarrier as inner layer gives heat protection upto 250 degrees. thumb re-inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344 , insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991 , electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991 , hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350c temperature.it should be atira tested for 250c splash, tested to iso 5025,9151,6942,9185 and en 1875-3 , chemical splash goggles with indirect ventilation, protect against splash and a hard-coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003 , chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003 , elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv , chemiflex latex gloves, length
Tender For supply of fire and safety equipmen - hose box ms , fire extinguisher box ms , fire water hose 15 meter , fire fighting nozzel mpb , fire fighting nozzel tp , fire fighting nozzle fog branch , fire fighting nozzle foam branch 10x , dcp fire extinguisher discharge tube 09 kg , dcp fire extinguisher sp valve 09 kg , co2 fire extinguisher discharge tube 6.8 kg , co2 fire extinguisher discharge tube 4.5 kg , spark arrestor hmv and small , welding blanket , safety helmet green , safety helmet white , windsocks cloth , cotton knitted hand gloves
Tender For corrigendum : requirement of safety, rescue and security items for ssctps fy 2025-26, suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap, gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch), barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5, chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160, acid/ alkali proof gloves having size of 18 inch with palm m, normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton, fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics, safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white, safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green, impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003, foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592, carry sheet ( stretcher)l x b: 212 x 75 cm with self weight 1 kg , load limit 159 kg , lift type: horizontal, wind indicator made of light weight pu coated nylon material. double stitch at all joints. plastic eyelets gives anticorrosion proper ties. the complete windsock comes with a polymer packing. 2 dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe., ear plugs corded epsav-570, nose/ dust mask rpsav -p2, flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164, vapour respirator with head stripes to accommodate twin cartridges with exhalation valve, safety net consisting of pp rope dia: 4mm, mesh size: 100 mm,outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr, ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a), heat shield hand gloves made of normal and tannedsplit leather of reddish brown colour. insulating thermalbarrier as inner layer gives heat protection upto 250 degrees.thumb re inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344, insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991, electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991, hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350 c temperature.it should be atira tested for 250 c splash, tested to iso 5025,9151,6942,9185 and en 1875-3, chemical splash goggles with indirect ventilation, protect against splash and a hard coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003, chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003, elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv, chemiflex latex gloves, length-300 mm, en size- l coating m
Tender For bid to ras supply of silicon carbide water proof 600a emery paper , sand paper , rubber latex long gloves , petrolium jelly , bag biodegradable big 14x20 inch , bag biodegradable small 14x16 inch , paint brush 3 inch , paint brush half inch 13mm , paint brush 1 inch , oil and grease remover , face mask , flourescent tape yellow 4 inch , wiper soft rubber , windsocks , white spirit , twine sewing fine , turpentine oil solvent , teflon thread seal tape roll of 12 mtr length , tape transparent 38 mm , silicon sealant compound 300 ml tube
Tender For bid to ras supply of servicing of 9 kg dcp co2 catridge type fire extinguisher as per soj. , servicing of 2 kg and 4 point 5 kg co2 fire extinguisher as per soj , servicing of 2 kg clean agent fire extinguisher as per soj , servicing of scaba and its total set of spares as per soj , refilling of 4 point 5 kg co2 fire extinguisher , refilling of 2 kg co2 cartridge as and when required basis and as per soj , refilling of 2 kg clean agent fire extinguisher , refilling of co2 catridge 180 gr and 200 gr for 9 kg dcp fire extinguisher , hpt hydrostatic pressure testing of 9 kg dcp fire extinguisher , hpt hydrostatic pressure testing of 4.5 kg co2 fire extinguisher , hpt hydrostatic pressure testing of 2 kg co2 fire extinguisher , hpt hydrostatic pressure testing of 2 kg ca fire extinguisher , hpt hydrostatic pressure testing of fire hoses , hpt hydrostatic pressure testing of product hoses , painting of 9 kg dcp fire extinguisher , painting of 4.5 kg co2 fire extinguisher , painting of 2 kg co2 fire extinguisher , supply and fixing of discharge hose of 9 kg dcp fire extinguisher , supply and fixing of discharge hose of 4.5 kg co2 fire extinguisher , supply and fixing of gun metal caps for 9 kg dcp fire extinguisher , supply and fixing of hydrant valve cap , supply and fixing of glass for fire hose box , supply and fixing of discharge horn for 2 and 4.5 kg co2 fire extinguisher , supply and fixning of safety clip for dcp fe , supply and fixning of lock ring and pin for dcp co2 fe , windsocks stand 24 multiply 96in , supply of windsock pole with frame 24x96 inch. , supply of fire bucket as per is 2546 , supply of dry chemical powder , supply of afff in ltrs , supply of safety helmet , supply of safety belts , supply of safety shoes with free size shoe cover , supply of reflective jackets , supply of first aid box , supply of foam pick up tube , supply of neoprene gloves for sampling , supply of 180 and 200 gr co2 cartridge for 9 kg dcp fire extinguisher , supply of coupling washer for fire hydrant , supply of ear plug , supply of plunger cap assembly , refilling of scaba cylinder 300 bar , supply of safety goggle. //bid details 2 / 37
Tender For supply of interference colour filter 47 5x26 5x1mm red for centreline lights idm 4582 , bidir top cover for centreline lights idm 4582 , gasket for base plate , gasket for the prism for touchdown zone lights idm 4671 , top cover no toe in for touchdown zone lights idm 4671 , o-ring gasket 145 64 x 3 53 silicon for touchdown zone lights idm 4671 , o-ring 160 0x3 0mm silicon for touchdown zone lights idm 4671 , two pin plug 300mm , interference colour filter 50 5x18x2 mm red for stopbar light idm 5771 , lamp , windsock 12 foot long , secondary cable