Latest wind ventilator Tenders | Government wind ventilator Tenders

Central Government/Public Sector

CTN :45731860

14 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of air vent for lhb c 3 tier economy coaches, colour shade is ral-7004, signal gray as per drg no :- ed64012 alt a or latest [ warranty period: 30 months after the date of delivery ]]

Central Government/Public Sector

CTN :45732125

03 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of cut off angle cock with vent for air brake wagons to rdso drg.no.wd-88123-s-01,alt.no.2and details of part drg.no.wd-88123-s-02 alt-6 other requirments confirming to str.no.02.abr.02,appendix-d.with amendments. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45731121

06 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply of round air vent for lhb ac 3 tier economy coaches as per central railway drg.no.misc sk.no.4021 suitable for rcf built lhb ac economy coaches. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45721001

08 Jul, 2026 4.75 Lacs

Jaipur - Rajasthan

Tender For supply of ceiling materials and other works at lok bhawan jaipur - providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with pvs / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(cost of aluminium snap beading shall be paid in basic item.)with float glass panes of 8 mm thickness, providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled and glazed shutter 25 mm to 40 mm thick : is 710- 1976 marked 12mm thick teak ply bwr both side, providing & fixing door, window, chowkhats and other frames, including antitermite treatment, m.s. flat, hold fasts of size 250 x 40 x 3mm fixed with m.s. bolt 5mm dia 50mm long duly embedded in cement concrete m-15 grade : ivory coast wood grade i, providing and fixing double action hydraulic floor spring of approved brand and manufacture is : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece m.s. with brass cover plate

Central Government/Public Sector

CTN :45713850

11 Jul, 2026 27.00 Lacs

Delhi - Delhi

Tender For repair/replacement to doors, window, ventilators, cupboards, flooring/ plastering, tilling and other miscellaneous joinery /sanitary items at af stn aastha complex, 5 aflu under aor of ge (af) faridabad - demolition/dismantling of brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed., m&l for brickwork with subclass b bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed., all as per item no 02.00 above but except bricks., m&l for brick work with sub class b bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cm 1:4 complete all as specified and directed., taking down cement plaster of any description on concrete surfaces such as soffit of rcc slab, chajjas and brick walls, ceiing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed., m&l for rendering 15 mm thick cement plaster in cm 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed., m&l for rendering 15mm thick in cm 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl wpc as per user manual complete all as specified and directed., m&l for rendering 10mm thick in cm 1:3 over concrete surface as on ceiling, chajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m&l for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., taking down chowkhats or frames with shutters not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed., taking down chowkhats or frames with shutters exc 1.5 sqm but not exc. 4 sqm each (without taking off shutters from the frames) complete all as specified and directed., taking down shutters of any description n exc 1 sqm each complete all as specified and directed., taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed., s&f for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed., s & f solid pvc door frame of size 50 x 47 mm made out of 5 mm plain colour pvc sheet reinforced with ms square tube incl taking down old frame any type complete all as specified and directed., s&f factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of ms tubes for top & bottom rails ms frame shall be convered with heat moulded plain colour pvc `c channel having a pvc sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour pvc sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain c

CTN :45711052

03 Jul, 2026 NA

Ganganagar - Rajasthan

Tender For supply of spares of m/s elgi make air compressor model no. 132-8.0 against ssp-81 - maintenance kit 4000 hr, part no 412400929, maintenance kit 16000 hr, part no 412400940, o-ring tube bundle, part no b011307100005, gasket moisture separator, part no 415400434, gasket - mist separator, part no 413400481, o ring, part no 415400656, o ring, part no 990402910, mesh moisture separator, part no b000308380005/ old part no - 413400478, o-ring moisture separator, part no 415401498, rubber elbow ow2, part no 415305938, air filter eg200-250, part no b004700770037, ccva assy ss ow2, part no a410677, air oil separator spinon, part no b006700770010, o-ring id32.9 x 3.5, part no 015402685, o-ring id45.0 x 3.0, part no 035400047, separator hsg assy.,part no 015321611, mesh separator d75 x 80, part no 015404543, elbow connector-g1/4, part no 415401516, elbow connector-g1/2, part no 015403848, 1/4 bsp bonded sealwasher, part no 000959385, 3/8 bsp bonded sealwasher, part no 000959386, 1/2 bsp bonded sealwasher, part no 000959387, valve assy air vent nh1x, part no 41041x022, nylon tube 12x10mm white , part no 000919253, manifold solenoid valve, part no 415302072, oil filter element-75 lpm, part no x017503, kit auto drain valve ad-5, part no b001303900006, grease unirex , part no 015404151, pressure transmitter -1 to 1 bar, part no 018364572, pressure transmitter -1 to 3 bar, part no 018364573, pressure transmitter 0-6 bar, part no 008979018, pressure transmitter -1 to 6 bar, part no 00897902r, temp transmitter (0-150 c), part no 018400478, temp transmitter (0-300 c), part no 018400479, neuron -iv controller plc, part no 018364634, item wise boq

CTN :45706682

03 Jul, 2026 11.38 Lacs

Ganganagar - Rajasthan

Tender For supply of spares of m/s elgi make air compressor model no. 132-8.0 against ssp-81- maintenance kit 4000 hr, part no 412400929 , maintenance kit 16000 hr, part no 412400940 , , o-ring tube bundle, part no b011307100005 , , gasket moisture separator, part no 415400434 , , gasket - mist separator, part no 413400481 , , o ring, part no 415400656 , , o ring, part no 990402910 , , mesh moisture separator, part no b000308380005/ old part no -413400478 , , o-ring moisture separator, part no 415401498 , , rubber elbow ow2, part no 415305938 , , air filter eg200-250, part no b004700770037 , , ccva assy ss ow2, part no a410677 , , air oil separator spinon, part no. b006700770010 , , o-ring id32.9 x 3.5, part no 015402685 , , o-ring id45.0 x 3.0, part no 035400047 , , separator hsg assy.,part no 015321611 , , mesh separator d75 x 80, part no 015404543 , , elbow connector-g1/4", part no 415401516 , , elbow connector-g1/2", part no 015403848 , , 1/4 bsp bonded sea washer, part no 000959385 , , 3/8 bsp bonded sea washer, part no 000959386 , , 1/2 bsp bonded sealwasher, part no 000959387 , , valve assy air vent nh1x, part no 41041x022 , , nylon tube 12x10mm white, part no 000919253 , , manifold solenoid valve, part no 415302072 , , oil filter element-75 lpm, part no x017503 , , kit auto drain valve ad-5, part no b001303900006 , , grease unirex, part no 015404151 , , pressure transmitter 1 to 1 bar, part no 018364572 , , pressure transmitter -1 to 3 bar, part no 018364573 , , pressure transmitter 0-6 bar, part no 008979018 , , pressure transmitter -1 to 6 bar, part no 00897902r , , temp transmitter (0-150 °c), part no 018400478 , , temp transmitter (0-300 °c), part no 018400479 , , neuron iv controller plc, part no 018364634

CTN :45724152

21 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of purg o mate automatic float air vent valve shut off valve having thread bsp-3/8 inch, 10bar, 110 degree centigrade and hexagonal ss reducer size-3/4 inch x 3/8 inch to rcf drg. no.- lw63150 alt. e item no. 4 & 7.matl. & specn. as per drg note:- make of the item should be as per drawing and advance sample approval is required as it is mentioned in drawing. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45590504

02 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of air vent silencer (details as per buyer specification document)

Central Government/Public Sector

CTN :45704339

06 Jul, 2026 NA

Vellore - Tamil Nadu

Tender For supply of sofn 216 al free bearing housing assy , sealing collar d80 mm , distance piece d78 mm , air vent half inch bsp , oil level indicator , oil ring , adaptor for mist , adaptor for rtd , sofn 216 bf fixed bearing housing assy , sealing collar d78 mm

Wind Ventilator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector