Latest window panes Tenders | Government window panes Tenders

CTN :45489397

19 Jun, 2026 14.20 Lacs

Kota - Rajasthan

Tender For cladding, glazing, sanitary and other repair work in ganesh udhyan kota.

CTN :45408698

10 Jun, 2026 17.47 Lacs

Kasaragod - Kerala

Tender For construction of 200 bedded gents and 200 bedded ladies hostel including internal water supply, sanitary installations, drainage etc at central university of kerala, periye campus, kasaragod, kerala. sh: providing and fixing aluminium work with glazing for kedar and alakananda hostel.subwork/packages:na

CTN :45408817

09 Jun, 2026 64.57 Lacs

Delhi - Delhi

Tender For construction of guest house cum cafeteria under phase-iii at nipgr, new delhi (sh: sky light work, aluminium glazing work in courtyard and other miscellaneous work)

State Government

CTN :45412906

25 Jun, 2026 1.90 Lacs

Korba - Chhattisgarh

Tender For replacment of missing window panes in d.m. plant and c.w. pump house at dspm tps, cspgcl korba east

CTN :45419965

11 Jun, 2026 34.85 Lacs

Puducherry - Tamil Nadu

Tender For construction of 400 bedded boys hostel building at jipmer campus, puducherry. (civil work): building portion including internal water supply lines, sanitary intallation, drainage, demolition of existing quarters & other development works. (electrical and mechanical installation): package c1: providing internal e1, c2: providing fire alarm system, c3: providing firefighting system, c4: providing cctv, c5: providing 3 nos 13 passenger lift, c6: providing 5000 lpd solar water heater, c7: providing networking, (agreement no.32/ee(puducherry)/cpwd/2023-24) sub head: risk & cost under clause 14 for structural glazing aluminium composite panel work, providing and supplying aluminium extruded tubular and other aluminium sections and designing, fabricating, testing, protection, installing and fixing in position structural galzing work and extra for openable / top hung vision glass panels and providing and supplying spandrel glass panels work.subwork/packages:risk & cost under clause 14 for structural galzing aluminium composite panel work, providing and supplying aluminium extruded tubular and other aluminium sections and designing, fabricating, testing, protection, installing and fixing in position structural glazing work and extra for openable / top hung vision glass panels and providing and supplying spandral glass panels work.

CTN :44908025

22 Jun, 2026 15.96 Lacs

Ludhiana - Punjab

Tender For corrigendum : housekeeping including cleaning, sweeping, dusting swabbing,removal of cab webs,cleaning of toilets and windows panes etc. by deploying part time sweepers(s) in various offices under suburban circle pspcl ludhiana, punjab.

State Government

CTN :45382897

08 Jun, 2026 13.48 Lacs

Faridabad - Haryana

Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of

Central Government/Public Sector

CTN :45134186

06 Jun, 2026 30.00 Lacs

Agra - Uttar Pradesh

Tender For corrigendum : repair and maint to door/windows, cupboard/kitchen cabinet work, joinery/glazing work, flooring and cement works, steel work, plastering work, roof sheet etc in aats of age b/r-i under ge(east) agra

corporations/Associations/Others

CTN :45355298

03 Jun, 2026 27.68 Lacs

Mayiladutjurai - Tamil Nadu

Tender For providing structural glazing (refer detail name of work for tender notice) for the work of construction of new district police office building with development works at mayiladuthurai in mayiladuthurai district - fabricating the structural glazing grid electro coloured anodizing using size (2 x1 2.5 to 3 kg), in-pw-tug-gp) fabricating supply and fixing of toughened glass partition grid using (2 x 1 ) aluminium section, in-ele-acp) providing and fixing of aluminium composite panel (acp) having 50x25x1.20mm tk fabricated fixed at all level elevation and heights, in-ele-alu ch) supplying and fixing of aluminum outer frame having 50x25mm 1.2mm tk, aluminum channel of size 50x25 mm plain, 1.2mm thickness, fabricated fixed at all level elevation height extrude section cutting and fixing required space, fw-ss-ahs-2leg) providing two legged scaffolding using 15cm diameter casurina props or best quality bamboo posts of 4m overall length fw-ss-ahs-5.5m b).5.50 m height in addition of 2.5m ht (portico), fw-ss-ahs-10.5m d) 10.50 m height in addition of 2.5m ht (front elevation), in-ele-cir.pill-bw) providing 0.60 mtr dia circular pillar at a height of 6.45 mtr by using country bricks with cement mortor

CTN :45338776

29 May, 2026 NA

Malda - West Bengal

Tender For supply & installation of 04 seater cubicle work station table size:750w x 600d x 750/1050ht. (in mm), 45 mm thick panel 1050ht.750 x1050 & 600 x1050,45 mm thick panel 1050ht.p/f of panel based modular workstations of 45 mm thickness with extruded aluminum end post of size 45x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. top trim is of aluminum section of size 45x12mm and snap fitted on its base of size 45x20mm. the aluminum frame work is supported on lower and upper partition block. bottom block is made up of 9mm prelaminated particle board of desired shade which is pasted on 33x25mm thick particle board baton frame, which is properly screwed to end post and bottom electrical race way. upper block is fixed above the table top and is made up of particle battens fixed with 9 mm thick pin board and cloth of desired shade, optionally white board or glazing can be provided instead of pin board. raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. the raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. the modular switch & socket plates can be mounted & punched onto the raceway panels with easy cable connectivity & accessibility in case of any repairs etc. table tops to be made up of 25mm thick pre laminated particle board. the tops are supported on partition with the help of cantilevers. all work tops fixed at the standard anthropometric working height of 750mm from the ground level & finished with well filleted edges, thus making those users friendly. a circular hole is provided on every w/top to facilitate the easy connection of cpu & monitor wires & is covered with a modular wire manager made in abs. gable end is made up of 18mm pre-laminated particle board of desired shade and screwed to top with help of brackets. used to support w/tops at the exposed ends giving an openness to all workstations, cubicles etc. the keyboard trays are made out of 18mm thk plpb & mounted under the worktop with sliding channels [ warranty period: 30 months after the date of delivery ] ]

Window Panes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others