Latest window panes Tenders | Government window panes Tenders

Central Government/Public Sector

CTN :45291377

12 Jun, 2026 45.84 Lacs

Cuddapah - Andhra Pradesh

Tender For supply of earth work in excavation , filling available excavated earth excluding rock , demolishing rcc work , providing and laying in position cement concrete , providing and laying in position specified grade of reinforced cement concrete , supplying and filling in plinth with sand under floors , steel reinforcement for rcc work , centering and shuttering including strutting lif in foundations footings bases of columns , centering and shuttering including strutting lif columns pillars piers abutments posts and struts , dry stone pitching 22 point 5 cm thick , neat cement punning , demolishing brick work , brick work with non modular fly ash bricks , finishing walls with textured exterior paint , finishing walls with 100 percentage premium acrylic emulsion paint , 15 mm cement plaster , random rubble masonry with hard stone , structural steel work riveted bolted or welded in built up , surface dressing of the ground including removing vegetation , removing white or colour wash by scrapping , providing and fixing glass panes with putty and glazing clips in steel doors , providing and fixing glazing in aluminium door window ventilator shutters , providing and fixing aluminium work for doors windows ventilators , providing and fixing gi chain link fabric fencing , providing and fixing ist quality ceramic glazed wall floor tiles , grading roof for water proofing treatment with cement concrete , repair to plaster of thickness 12mm to 20 mm in patche , providing and laying water proofing treatment on roofs of slabs , 0 mm thick factory made polyvinyl chloride pvc door shutter , providing and fixing factory made panel pvc door shutter consisting of frame , providing and fixing on wall face unplasticised rigid pvc rain water pipes , providing mixing and applying sbr polymer , providing and injecting approved grout 2 percentage of weight of cement used modified cement slurry made with non shrink compound in concrete rcc work , providing and injecting approved grout cement slurry made with shrinkage compensating cement in concrete rcc work , providing and injecting approved grout epoxy injection grout in concrete rcc work of approved make , providing laying spreading and compacting graded stone aggregate

CTN :45338776

29 May, 2026 NA

Malda - West Bengal

Tender For supply & installation of 04 seater cubicle work station table size:750w x 600d x 750/1050ht. (in mm), 45 mm thick panel 1050ht.750 x1050 & 600 x1050,45 mm thick panel 1050ht.p/f of panel based modular workstations of 45 mm thickness with extruded aluminum end post of size 45x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. top trim is of aluminum section of size 45x12mm and snap fitted on its base of size 45x20mm. the aluminum frame work is supported on lower and upper partition block. bottom block is made up of 9mm prelaminated particle board of desired shade which is pasted on 33x25mm thick particle board baton frame, which is properly screwed to end post and bottom electrical race way. upper block is fixed above the table top and is made up of particle battens fixed with 9 mm thick pin board and cloth of desired shade, optionally white board or glazing can be provided instead of pin board. raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. the raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. the modular switch & socket plates can be mounted & punched onto the raceway panels with easy cable connectivity & accessibility in case of any repairs etc. table tops to be made up of 25mm thick pre laminated particle board. the tops are supported on partition with the help of cantilevers. all work tops fixed at the standard anthropometric working height of 750mm from the ground level & finished with well filleted edges, thus making those users friendly. a circular hole is provided on every w/top to facilitate the easy connection of cpu & monitor wires & is covered with a modular wire manager made in abs. gable end is made up of 18mm pre-laminated particle board of desired shade and screwed to top with help of brackets. used to support w/tops at the exposed ends giving an openness to all workstations, cubicles etc. the keyboard trays are made out of 18mm thk plpb & mounted under the worktop with sliding channels [ warranty period: 30 months after the date of delivery ] ]

CTN :45288161

20 Jun, 2026 30.00 Lacs

Badnagar - Madhya Pradesh

Tender For supply of nirman samgri - paver block (i mould) 80 mm, 160mmx200mm, paver block (i mould) 60 mm, 160mmx200mm, touch wood paint, , , rcc pole hight 7 feet with fixing, . . , , , . . , , , black soil, structure steel, jcb with fuel and operator, empty cement bag, aluminium section with glazing complete, hamour machine, waterproof solvant, mason, majdoor, tractor trolly with fuel and operator, dumper with fuel and operator, iron girder, sand, precast column 10"x10"x8, rcc 3 seater bench, pvc door 2", tree guard 400 mm dia, labour for panter, complete pvc speed bracker install, kota stone work, adhesive cement, wire mess (jali), gi sheets (22 guage), stainless steel (grade 304), gi sheet (26 guage)

State Government

CTN :45264317

28 May, 2026 7.36 Lacs

Idukki - Kerala

Tender For this estimate include providing and fixing aluminium work for door, window, ventilators and partitions, providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber neoprene gasket etc

CTN :45284241

28 May, 2026 NA

Malda - West Bengal

Tender For supply & installation of 04 seater cubicle work station table size:750w x 600d x 750/1050ht. (in mm), 45 mm thick panel 1050ht.750 x1050 & 600 x1050,45 mm thick panel 1050ht.p/f of panel based modular workstations of 45 mm thickness with extruded aluminum end post of size 45x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. top trim is of aluminum section of size 45x12mm and snap fitted on its base of size 45x20mm. the aluminum frame work is supported on lower and upper partition block. bottom block is made up of 9mm prelaminated particle board of desired shade which is pasted on 33x25mm thick particle board baton frame, which is properly screwed to end post and bottom electrical race way. upper block is fixed above the table top and is made up of particle battens fixed with 9 mm thick pin board and cloth of desired shade, optionally white board or glazing can be provided instead of pin board. raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. the raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. the modular switch & socket plates can be mounted & punched onto the raceway panels with easy cable connectivity & accessibility in case of any repairs etc. table tops to be made up of 25mm thick pre laminated particle board. the tops are supported on partition with the help of cantilevers. all work tops fixed at the standard anthropometric working height of 750mm from the ground level & finished with well filleted edges, thus making those users friendly. a circular hole is provided on every w/top to facilitate the easy connection of cpu & monitor wires & is covered with a modular wire manager made in abs. gable end is made up of 18mm pre-laminated particle board of desired shade and screwed to top with help of brackets. used to support w/tops at the exposed ends giving an openness to all workstations, cubicles etc. the keyboard trays are made out of 18mm thk plpb & mounted under the worktop with sliding channels [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45257526

01 Jun, 2026 5.72 Lacs

Sundergarh - Odisha

Tender For providing and fixing aluminium form work with glazing in doors and windows at sardega rls siding building at b(w) ocp under mahalaxmi area.

CTN :44908025

03 Jun, 2026 15.96 Lacs

Ludhiana - Punjab

Tender For corrigendum : housekeeping including cleaning, sweeping, dusting swabbing,removal of cab webs,cleaning of toilets and windows panes etc. by deploying part time sweepers(s) in various offices under suburban circle pspcl ludhiana, punjab.

Central Government/Public Sector

CTN :45228045

23 May, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 63 )items as given below ,[1] taking out door&window shutter 110.000 ea,[2] lbr f/taking out door&window frame 83.000 ea,[3] taking out&refixg old rod,window frame 222.000 kg,[4] weather coat (single coat) 278.000 m2,[5] fixg 60mm thick decorative paver blocks 28.000 m2,[6] cutting kutcha drain,depth<30cm ord soil 10.000 m,[7] fixg,hydraulic door closer,heavy type 5.500 ea,[8] fly ash brick wrk, 110mm, m-7.5, (1:4) 555.000 m2,[9] fly ash brick wrk,230mm,m-7.5,foundation 55.000 m3,[10] flyash br wrk,230mm,m7.5,super sturcture 140.000 m3,[11] fixg netlon mosquito net to the windows 5.500 m2,[12] fixg,wash basin mixer 3.000 ea,[13] fixg,cp shower rose 3.000 ea,[14] fixg,wall mixer 3.000 ea,[15] fixg,cp pillar cock 5.000 ea,[16] sup,fit,fix hygeine pipe 22.000 ea,[17] takg out carefully frm shuter,wood bead 55.000 ea,[18] fixg,iron butt hinge,w/screw,50x30x.90mm 27.000 ea,[19] fixg,iron butt hinge,w/screw,50x37x1.5mm 16.000 ea,[20] cutting kutcha drain,depth<30cm mix soil 55.000 m,[21] all types of maintenance & civil jobs 1.000 ea,[22] prvdg,date catalogue,32x25mm 28.000 ea,[23] colour washing,pigment,int.all flr,2coat 555.000 m2,[24] plaster sand/cement mortar,4:1,thk10mm 8.000 m2,[25] pro,fix,float valve 11.000 ea,[26] lbr chrg f/fab,fixed glazing 5.500 m2,[27] app,rus,rem,eff area 16.700 m2,[28] cra,rep,cut,cra,hard 5.500 m,[29] dam,pro,tre,rem,loose 5.500 m2,[30] sea,str,cra,hig,viscous 5.500 m,[31] dis,pcc,lim,ter, works 14.000 m2,[32] plaster sand/cement mortar,6:1,thk15mm 55.000 m2,[33] ms/wi orntl grill,gnd flr,wt10-16kg/sqm 2.500 mt,[34] fabrication of m.s. structures 2.500 mt,[35] prov.,fixing white makrana marble 17.000 m2,[36] fixg decorative roller blinds to windows 11.000 m2,[37] providing single coat distemper 555.000 m2,[38] supply,fitg,fixg,venetian blinds 11.000 m2,[39] supply,storage tank,500ltr 28.000 ea,[40] air entrained screed concrete 50.000 m3,[41] fixg in position approved pvc door frame 111.000 m,[42] fixg,door frame,pvc 111.000 m,[43] supply&fixg,pvc door shutter 200.000 m2,[44] supply,fitg,fixg,pvc door 100.000 m2,[45] labour f/brickwork using old brick,cm1:6 11.000 m3,[46] supply & fixing of polcarbonate sheets 14.000 m2,[47] supply,erection of colour coated sheet 14.000 m2,[48] drying of damp walls/ceiling etc 11.000 m2,[49] prvdg&fixg,false ceiling 5.500 m2,[50] fixg door fitting,stainless steel aldrop 14.000 ea,[51] fixg,door,fully casing tower bolt 14

State Government

CTN :45087675

18 May, 2026 1.87 Crore

Delhi - Delhi

Tender For corrigendum : repair maintenance of dda vacant flats including miscellaneous civil works like provide & fixing of wall tiles, floor tiles,door shutter, glazing in windows, flushing cistern, kitchen sink, p/l ppr pipe,p/f water closet ,p/f aluminium work in window, p/l granite sto

Central Government/Public Sector

CTN :45134186

30 May, 2026 30.00 Lacs

Agra - Uttar Pradesh

Tender For repair and maint to door/windows, cupboard/kitchen cabinet work, joinery/glazing work, flooring and cement works, steel work, plastering work, roof sheet etc in aats of age b/r-i under ge(east) agra

Window Panes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector