Latest wing nut Tenders | Government wing nut Tenders

State Government

CTN :45279132

04 Jun, 2026 1.66 Crore

Udhamsign Nagar - Uttarakhand

Tender For work of construction of a new 11 kv feeder for bifurcation of overloaded 11 kv chakarpur feeder under edd khatima in capital s.i. head, including supply of decentralized materials, as per tender specification. - annexure-a (supply of following material as per upcl norms.), bracing clamp for sp-55 with nut and bolt., pp & clamp with nut and bolt st pole sp-55., stay clamp for sp-55 with nut and bolt., pp & clamp with n&b st pole sp-72., pp & clamp with n&b pcc pole, 8.5 mtr., stay clamp for pcc pole., ht stay insulator., 33 kv suspension ties on every pin insutlator., ipc with aluminium bail for earthing., 11 kv ipc for covered to covered cond., 11 kv ipc for covered to bare conductor., 11 kv mid span jointing kit., 11 kv aaac covered cond. al-59, 99 sq.mm., 11 kv tension clamp with bail & ipc., annexure-b (following work as per upcl norms), chemical earthing., fabrication of steel., excavation of pit for stay set., erection of 11 kv stay set,, grouting of stay set., excavation of pit for pole., erection of single pcc pole., erectin of single sp-55 pole., erection of single sp-72 pole., erection of pcc double pole., erection of sp-55 double pole., grouting of pole., muffing of pole., painting of sp-55 pole., lopping and choppong of tree branchases., cartage of pcc pole, 51-70 k, cartage of sp-55 pole, 51-70 km., cartage of sp-72 pole, 51-70 km., cartage of petty material, 51-70 km., headload cartage of pcc pole, 0-1 km., headload cartage of sp-55 pole, 0-1 km., headload cartage o sp-72 pole, 0-1 km., headload cartage of material, 0-1 km., fixing of 33 kv suspension ties., fixing of ipc with al, bail for earting., jumpering of d/p tpmo, fuse set and t/f., jumper section pole., fixing of 11 kv 90 kn tension clamp b&ipc., fixing of 11 kv ipc for cc to cc cond., fixing of 11 kv ipc for cc to bare cond., fixing of 11 kv mid span jointing kit., laying spreading, stringing aac conductor

CTN :45063615

30 May, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For corrigendum : supply of 25px1c001 c c - ev7159d-cs11046 solenoid 24v ac air , ev7159d- cs11050 monitor smart cell 24v ac , ev7159d-ms002 air eliminator repair kt , ev7159d-ms019 coalescer , ev7159d-ms026 end plate , ev7159d-ms223 pressure gauge , ev7159d-ms022a drawbolt 14 , ev7159d- ms641 gasket set , ev7159d-cs10998 probe , ev7159d- cs11084 agm media 12 buckets set cs3000 , ev7159d- cs11052 cell wiper ring , ev7159d-cs25104 1st stage pack cs3000 4000 , ev7159d-vmbs1 bulb set , ev7159d- cs11047 valve angle seat sol 1 5 , ev7159d-cs11083 advanced granular media agmi part no cs 11060 , ev7159d-cs25103 1st stage pack cs1000 2000 mk2 , ev7159d-cs11007 cp4 r2 oil probe pcb , ev7159d- cs20012 diverter valve 1 5 c w air solenoid , ev7159d-cs20020 repair kit diverter valve 1 , ev7159d-cs20021 repair kit valve 1 2 , ev7159d- cs25120 wadding filter mesh , ev7159d-cs25122 wadding cloth 620mm cs 3 4 , ev7159d-cs25211 pump roto 531 screw no motor included , ev7159d- cs25211fl feed pump , ev7159d-cs25224 feed pumpb stator , ev7159d-cs25226 stator roto d531 , ev7159d-ms001 air eliminator 1 2 , ev7159d-ms022 draw bolt , ev7159d-ms025 wing nut 3 8 unc , ev7159d-ms025-d wing nut m10 bzp , ev7159d-ms027 washer plastic , ev7159d-ms502 pressure relief valve 25mm , ev7159d-ms511 water valve 40mm , ev7159d-ms644 gasket set cs3000 , ev7159d-msi-26 repair kit 1 5 oil valve n c , ev7159d-vmfs1 fuse set , ev7159d-ms019b coalescer cartridge 14 ) /bid number : gem/2026/b/7358328 * /dated: 02-05-2026 & & / bid document 1 / 31

State Government

CTN :45282107

10 Jun, 2026 63.00 Lacs

Patti - Punjab

Tender For supply of supply of 11 kv v type cross arm clamp , supply of 3 phase dis. box clamp with nut and bolts , supply of connecting cable , supply of l.t. fuse set protection box , supply of tinned copper fuse wire different size , supply of hdpe pipe , supply of stone pad , supply of holding clamp , supply of ms angle , supply of t-off chhanel , supply of top chhanel 125x65x240 , supply of dropper channel 100x50x2028 mm. , supply of danger board with clamp and nut and bolt , supply of g.i. patti clamp nut and bolts , supply of l.t. tail less unit , supply of copper l-pieace , supply of 11 kv f clamp , supply of suspension clamp , supply of dead end clamp , supply of eye i hook , supply of eye bolts for guarding , supply of j hook , supply of lt clamp , supply of pearcing connector , supply of alluminium lug 120 sq.mm. , supply of alluminium lug 240 sq.mm. , supply of alluminium lug 70 sq.mm. , supply of nut bolts and washers off size , supply of guarding angel , supply of guarding angel clamp , supply of m.s. angel iron 65x65x6 mm. , carriage of 9 m stp pole-sp- 55 galvanised , carriage of 11 m stp pole-sp- 55 galvanised , carriage of 8.5 m pcc pole , carriage of v type cross arm for 11 kv , carriage of 11 kv pin insulator with pin , carriage of disc insulator with fitting t and c 45 kn , carriage of 11 kv fuse set , carriage of 11 kv tpmo with polymer insulator , carriage of complete stay , carriage of distribution transformer 25 kva , carriage of distribution transformer 63 kva , carriage of distribution transformer 100 kva , carriage of distribution transformer 250 kva , carriage of acsr dog conductor , carriage of acsr weasel conductor , carriage of m s earthing rod 20 x2540 mm , carriage of lt al. xlpe cable size 1x240 sq.mm. , carriage of lt pvc cable 1x120 sq.mm. for dtr , carriage of lt pvc armoured cable size 3.5x70 or 35 sq.mm. , carriage of 11 ) /bid number : gem/2026/b/7551524 * /dated: 20-05-2026 & & / bid document 1 / 54 kv xlpe cable 3x185 sq.mm. , carriage of lt ab cable 3x120 sq.mm. , carriage of lt ab cable 3x50 sq.mm. , carriage of lt ab cable 3x95 sq.mm. , carriage of lt pvc armoured cable size 4x25 sq.mm. , carriage of 33 kv xlpe cable 3x300 sq.mm. , carriage of 33 kv indoor or outdoor jointing kit , carriage of 11 kv indoor or outdoor jointing kit , carriage of 33 kv straight through , carriage of 11 kv straight through size 3x185 sq.mm. , carriage of 11 kv vcb , carriage of g.i. wire 6 or 8 swg for guarding , carriage of three phase distribution box , erection of l.t. fuse set protection box , execution of chemical earthing with g.i. patti clamp nut and bolts , execution of pipe earthing with g.i. patti clamp nut and bolts , erection of l.t. tail less unit with all respective material , laying of acsr dog conductor , laying of acsr weasel conductor , laying of lt ab cable 3x120 sq.mm. , laying of lt ab cable 3x50 sq.mm. , laying of lt ab cable 3x95 sq.mm. , mounting of 3 phase distribution box , erection of double pole structure , erection of single pole structure , grouting of pcc or stp pole , grouting of stay , earthing of pole , guarding of 11 kv line , fencing of distribution transformers , plinth work , installation of transformers 11 or 0.4 kv t or f 25 kva , installation of transformers 11 or 0.4 kv t or f 63 kva , installation of transformers 11 or 0.4 kv t or f 100 kva , installation of transformers 11 or 0.4 kv t or f 250 kva , laying of cable 11 kv xlpe cable 3x185 sq.mm. , laying of cable 33 kv xlpe cable 3x300 sq.mm. , installation of 33 kv indoor or outdoor jointing kit , installation of 11 kv indoor or outdoor jointing kit , installation of 33 kv straight through , installation of 11 kv straight through , installation of 11 kv vcb , dismentlling of jarjar g.i. wire and weasel conducter , received back of distribution transformer

State Government

CTN :45252783

09 Jun, 2026 5.00 Lacs

Etah - Uttar Pradesh

Tender For supply of safe carriage of pcc pole , safe carraige of st pole , cartage of line material , replacment of damaged pcc pole , replacment of damaged st pole , grouting nuzzling and muffling of pcc pole , grouting nuzzling and muffling of st pole , erection of double pcc pole , erection grouting and nuzzling of stay set , fixing and connecting of earthing rods , re sagging of acsr dog and weasel conductor , re sagging of lt ab cable , laying spreading lifting of cable , laying spreading lifting of cable , cutting and chopping of tree branches , supply and fixing of nut bolt off size , supply and fixing of holding clamp , erection of cross arm etc , weldig of stp rust pole , replacment of lt cable , recieved back material

Central Government/Public Sector

CTN :45252276

30 May, 2026 NA

Ernakulam - Kerala

Tender For supply of brass wire pulley for manual operated remote quick closing valve , c i wire gripbyclip for manual operated remote quick closing valve , ms galvanised turnbuckle for manual operatedremote quick closing valve , sus316bybrass eye bolt and wing nut for manual operated remote quick closing valve , ms galvanised thimble for manual operated remote quick closing valve , brass name plate 150x50x1point2 t formanual operated remote quick closing valve , 4mm dia ss wire for manual operated remote quickclosing valve

State Government

CTN :45217414

01 Jun, 2026 NA

Faridkot - Punjab

Tender For quotation for purchase of workshop items - vaibhav pillar drill 230v (heavy duty), daptil roughing tool (heavy duty), grinding wheel 8" (heavy duty), metric tap set (6 no. to 32) (heavy duty), wing nut set (6 no. to 32) (heavy duty), adjustable steel tap wrench (13 mm) (heavy duty), face plate (flange) 8" (heavy duty), adjustable bench vice 250 mm (heavy duty), belt & pulley set (6-inch multi-groove) (heavy duty)

CTN :45205975

21 May, 2026 NA

Parganas - West Bengal

Tender For supply of spare parts for kraz veh - distributor assy(hydraulic booster) part no 255b3405016, repair kit for water seperator part no 113511010zhi, wing nut assy part no 2103525030

Central Government/Public Sector

CTN :44092531

18 May, 2026 NA

Kanpur - Uttar Pradesh

Tender For bid to ras bid to ras tender for supply of p-clip alt as4525-6 , seal , relay , relay-220 , hose , socket , sockets , timatic bolt , timatic bolt , self aligningdouble row ballbearing , self aligning double row ball bearing , self alligning double row ball bearing , spherical bearing , spherical bearing , 90 deg elbow , blind rivet 100 csk , bonded seal , bush , circlip , circlip , circlip , circlip , connecting hose , coupling nut handle , earth module , ferrule , ferrule , ferrule , ferrule , indicator , nut bulkhead fitting , o ring seal , o ring seal , rails , rail , sleeve , spring hing , straight adapter , t with swivel run , washer saddle , blind rivet , blind rivet , blind rivet general purpose , blind rivet 100 c sk , blind rivet 100 c sk , blind rivet 100 c sk , cleats-pclips , clump assembly , cone-union , cone-union , hexagonal bolt - 15dia , k-sert inserts , l angle , nut-union , seal , sleeve , wat15ettbrg , wat32ettbrg , wing nut , zwagn12erolbrg , p clip , hex bolt-15 dia , screw , washer , split pin , self aligning double row ball bearing , o ring sleeve , clamp with lining , clump assembly , rivet c sk head , washer , circuit breaker , timatic bolt , timatic bolt , ferrule , hex nut , switch guards , relay time , grommet-40 dia , p clips , blind rivet 100 c sk , clip angle alt hs-510 , clip , connector , nut-esna single anchor , hexagonal screw , washers , seal , coupling , p- clamp , seal , seal , sleeves

CTN :45194351

15 Jun, 2026 NA

Kolkata - West Bengal

Tender For supply of g.i.bolt size -100x8 mm & wing nut with 02 nos, g.i.washer, o/d-20 mm, i/d- 8 mm, thickness-02 mm (drawing attached) [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45024889

19 May, 2026 5.04 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of ht hex head bolt with nut and spring washer m8x35 , hthh bolt with nut and spring washer m12x35 , hthh nut bolt and spring washer m16x45 , hthh nut bolt and washer m16x55 , ht nut bolt with washer 16x80mm , ht bolt nut with spring washer m20x75 , hthh nut bolt and spring washer m22 x 45 , hthh nut bolt and spring washer m22 x 95 , eye bolt m16x150 with wing nut and washer , ht hex head bolt with nut and washer 22x100mm full thread , ht bolt and nut size m20x200mm with plain washer full threaded , gi hex head bolt with nut 1inch bsw x 120mm lg , gi hex head bolt with nut inch bsw x 80mm lg , gi hex head bolt with nut 1inchbsw x 120mm lg , gi hex head bolt with nut 1inchbsw x 130mm lg , gi hex head bolt with nut 1inchbsw x 200mm lg , gi hex head bolt with nut 1inchbsw x 220mm lg , gi hex head bolt 200mm lg , gi hex head bolt 240mm lg , gi hex head bolt 100mm lg , gi hex head bolt 150mm lg , gi hex head bolt 70mm lg , gi hex head bolt with nut 100mm lg , gi hex head bolt with nut x 110mm lg , gi hex head bolt with nut 120mm lg , gi hex head bolt with nut 170mm lg , gi hex head bolt with nut 180mm lg , galvanised hex nut , gi hex head bolt with nut 145mm lg , gi hex head bolt with nut and plain washer 80mm lg , gi hex head bolt with nut 150mm lg , gi hex head bolt with nut 90mm lg , gi hex head bolt with nut 95mm lg , g.i. hex head bolt 65mm lg , g.i. hex head bolt 75mm lg , g.i. hex head bolt 85mm lg , galvanised hexagonal head bolt 90mm lg , gi hex head bolt with nut 140mm lg , ht hex bolt with nut m16x65mm , ht hex head bolt with nut size m16x50mm half thread , ht hex bolt with nut and washer size m 18x90mm , ht hex bolt with nut size m 20x120mm , ht nut, bolt with washer size m 16x80mm , ht bolt with nut size m 20x150mm , ht hex head bolt with nut size m 16x100mm , ht hex head bolt with nut and plain washer size m 06x50mm , ht nut and bolt with washer size m 10 x 50 mm , ht nut and bolt with washer size m 12 x 50 mm , ht hex head bolt with nut size m16x70mm , ht hex head bolt with nut sizem16x90mm , ht hex head nut and bolt size m20 x 120mm , ht stud with double nut and plain washer m24 x 260 mm , gi stud with double nut and plain washer 250mm lg 75 mm thread both side , gi stud with double nut and plain washer 210mm lg 75mm thread both side , gi stud with double nut and plain washer 215mm lg 75 mm thread both side , gi stud with double nut and plain washer 225mm lg 75 mm thread both side , gi stud with double nut and plain washer 215mm lg 75mm thread both side , gi stud with double nut and plain washer 210mm lg 75mm thread both side , ht hex head bolt with nut and plain washer size m 30 x 200mm , ht hex head bolt with nut and plain washer size 32x200mm , gi plain washer 1inch , gi plain washer 1pont 25 inch , gi plain washer , ht plane washer m20 , ms plain washer 12 mm , ms plain washer m 10mm , ht plain washer m16 , ht stud with nut and washer m 16x270 mm , ht hex head blot with nuts m 24x90 mm , hthh nut bolt and washer m24x70 , ht stud with doble nut and washer m16x220 , ht stud with nut and washer m 16x270 , ht bolt with nut and two plain washer

Wing Nut Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others