Latest winter bag Tenders | Government winter bag Tenders

CTN :45332930

05 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of training activity painting photographs 5x4 feet , cartridge case collector , ether capsule , acrylic sign holder table double side , flex chart printed

State Government

CTN :45275009

26 May, 2026 NA

Multi City - Delhi

Tender For auction sale of depot non ferrous scrap - scrapped s&t cables and hdpe ducts. (1)signalling cables copper -1.5sqmm(2c,4c,6c,8c) and 5c 2.5sqmm armoured copper cable. (2) telecom cables : copper telephone (20,50 and 200 pairs)clock pas cctv (co axial), power cables,fiber cables-fots (48 cores and it (6 cores). (3) hdpe ducts -40/50 sqmm dia of both signalling and telecom system. note: (i) minimum quantity to be lifted per day= 9 mt. (ii) total nos. of days for lifting complete lot= 04. i) this item comes under the category of hazardous and other waste and its sale shall be made only to an authorised actual user or authorised waste collector or an authorised disposal facility who have been authorised by state pollution control board/cpcb/ministry of environment, forest and climate change under hazardous and other wastes (management & transboundary movement) rules, 2016. therefore, participating bidders must hold valid authorization/registration certificate from spcb/cpcb/moefcc. this authorization/ registration certificate must be valid both at the time of bidding as well as at the time of lifting of material.ii) firm shall also submit a certificate/undertaking in regard to the total hazardous waste purchased/collected and processed for the current financial year till the time of auction.iii) original authorisation/registration certificate as well as the passbook issued to purchaser by spcb/cpcb along with authorization shall be required to be produced at the time of taking delivery. handing over of the hazardous and other wastes to the purchaser shall be only after making of the entry into the passbook of the purchaser by the depot officer of dmrc custodian.iv) the entire arrangement for transportation of the lot shall be made by the purchaser and the responsibility of safe transport of hazardous and other wastes as per provisions of hazardous & other wastes (management & transboundary movement) rules-2016 shall lie entirely on purchaser.v) the purchaser (receiver) shall also ensure the necessary authorisation for transport from concerned spcbs and this aspect shall be clearly stated in transport manifest (movement document) issued by department of dmrc handing over hazardous and other waste scrap to the purchaser. before taking delivery the purchaser shall submit documents/details to depot officer of custodian to show that (a) in case of transportation of hazardous and other waste for final disposal to a facility existing in a state other than the state where the waste is generated, he has obtained no objection certificate from the spcbs of both the states (b) in case of transportation of hazardous and other waste for recycling or utilisation including co-processing, he has given intimation to both spcbs (c) in case of transit of hazardous and other waste for recycling, utilisation including co-processing or disposal through a state other than states of origin and destination, he has given prior intimation to concerned spcb of states of transit.vi) the purchaser shall also ensure that the transport manifest system (movement document) for hazardous and other waste prepared by the depot officer of dmrc custodian as per provisions of hazardous waste management rules is followed. he will also give an undertaking that the relevant copies of the transport manifest (movement document) (as per colour code prescribed in the hazardous waste management rules shall be duly signed by him as well as by the transporter arranged/nominated by him and proper disposal of each signed copy of the transporter shall be ensured by him as well as by the transporter arranged/nominated by him for lifting the lot. also the acknowledgment copy of the transport manifest (blue copy) shall be provided by him to dmrc within 07 days of lifting a lot.

CTN :45250646

29 May, 2026 5.0 Thousand

Chandigarh - Chandigarh

Tender For supply of case collector insas

CTN :45252669

29 May, 2026 NA

Kinnaur - Himachal Pradesh

Tender For supply of butt suspension , sig case collector , assault forehead grip , ranger forehead grip , dynamic rope 10mm

CTN :45252934

28 May, 2026 80.0 Thousand

Poonch - Jammu And Kashmir

Tender For supply of led tv 32 inch , 43 inch led tv , case collector ak 47 , helmet mounted light , pointer stick steel , steel adjustable pointer stick , collapsible ladder telescopic , tele phone binatone

CTN :45224442

26 May, 2026 NA

Jodhpur - Rajasthan

Tender For supply of mirror wit ply fitting , wooden rack book , fiber sheet with fitting , visitor book , case collector , table glass 3x7 12mm black , table glass 5x30 , iron angle for ac stand , shower mat , letter acrelic 12 inch maroon wall

State Government

CTN :45197532

04 Jun, 2026 NA

Thoubal - Manipur

Tender For supply of fig 11 target paper combat , fig 12 target paper combat , bunker target grey 4x4 , bunker target orange 4x4 , target paper 1x1 , fired case collector , flag cloth red , flag cloth blue , flag cloth green , flag cloth yellow , flag cloth white , hessian cloth , white board 3x4 , easel iron , manila rope , lime , whistle

CTN :45089252

15 May, 2026 NA

Poonch - Jammu And Kashmir

Tender For supply of led tv 32 inch , 43 inch led tv , case collector ak 47 , helmet mounted light , pointer stick steel , steel adjustable pointer stick , collapsible ladder telescopic , tele phone binatone

Central Government/Public Sector

CTN :45125921

18 May, 2026 NA

Mumbai - Maharashtra

Tender For auction sale of rolling stock - condemned diesel loco no. 36157 wds/6 with iron steel and non-ferrous. restricted items: 1. complete bogie frame with wheel set, axel box and gear case = 01 nos., 2. 03 nos. of wheel sets with axel boxes without gear case = 01 nos. removed items: 1. pneumatic valve and air dryer = 01 nos., 2. radiator core = 01 nos., 3. came shaft = 01 nos., 4. extension shaft = 01 nos., 5. lube oil junction 01 and junction pipe 02 = 01 nos., 6. lube oil cooler pipe = 01 nos., 7. lube oil strainer, bottom pipe and cock = 01 nos., 8. steel balo and upper rode lower = 01 nos., 9. water tank = 01 nos., 10. fuel primary filter body and secondary filter body = 01 nos., 11. sensor loader balo = 01 nos., 12. tsc foundation plate = 01 nos., 13. bubble collector pipe ( z pipe, c pipe) = 01 nos., 14. water temperature gauge, pipe = 01 nos. 15. traction motor = 06 nos. remark: 1. restricted items to be returned to the stock holder in good condition by the purchaser at the time of delivery. 2. lot no. is painted on loco. 3. approach road is available up to lot. 4. hsd oil and lubricants if found to be returned to the stock holder. 5. locos are presently stabled at diesel shed kurla. after auction and before handing over, loco will be placed at cla yard for cutting and delivery purpose. purchaser is advised that loco will be placed only after certification of line by sse/pway/mnkd and as advised by sse/d/cla. 6. after purchaser submit all the documents and d.o after auction to dme/d/cla office, sse/d/cla in consultation with sse/p.way/mnkd will decide the date of placement of loco at cutting yard and only after handing over of loco will be done. 6. purchaser has to ensure safety of railway asset and his labour while working in railway premises. if any losses arise due to negligence, the purchaser will be fully responsible. 7. purchaser has to personally visit the site and see the lot. no claim will be entertained after sale of lot. 9. purchaser has to keep enough water/sand at the cutting site. 10.lot is ok for sale. qty : 01 number. location: presently stabled at diesel loco shed kurla. stock holder: dme d cla .

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

Winter Bag Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector