Latest wiper ring Tenders | Government wiper ring Tenders

Central Government/Public Sector

CTN :41727514

15 Sep, 2025 NA

Multi City - Multi State

Tender For supply of door lock and key for ht compartment as per patra and chanda code no lk-520330, accepted make:- patra and chanda. supplied by oem or authorized dealer. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41727544

07 Nov, 2025 NA

Multi City - Multi State

Tender For supply of ht compartment ss hatch door, as per drawing: memu/dmc/3ph-9-0-015 col- i, packing instruction no.pi042 ver1.0. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41704768

15 Sep, 2025 22.30 Lacs

Gorakhpur - Uttar Pradesh

Tender For supply of provision of lighting arrangement for the watch tower along with solar system at kushinagar airport : : - design and sitc of off grid solar system of 1 kwp capacity along with suitable capacity inverter and 2 nos. of 150 ah solar tubular battery along with necessary module mounting structure & civil works like foundation etc. as required at site for upssf watch tower in operational area of airport., supply of 4c x 6 sq. mm xlpe insulated & pvc sheathed, armored aluminium conductor cable of 1.1kv grade as per is 7098 (part i) 1988 with up to date amendments etc. complete as required., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required.upto 35 sq. mm (clamped with 1mm thick saddle), laying of hdpe pipe upto size 50 mm complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/hume/metal pipe as required.upto 35 sq. mm, supplying and fixing of following way single pole and neutral, sheet steel, mcb distribution board 240 v, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) 6 way, double door, supplying and fixing 6 amps to 32 amps rating, single pole, 240 volts, 10 ka, c curve, miniature circuit breaker suitable for inductive loads in the existing mcb db complete with connections, testing and commissioning etc. as required., supplying and fixing dp mcb 32 amps, double pole, rating, 240 volts, 10 ka, c curve, miniature circuit breaker in the existing mcb db complete with connections, testing and commissioning etc. as required., wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/ recessed steel conduit, with modulat switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper stranded conductor single core cable etc. as required.(group c), wiring for circuit/ sub-main wiring along with earth wire with 2x2.5 sq.mm+ 1x 2.5 sq.mm earth wire.sizes of frls pvc insulated copper conductor, single core stranded cable in surface/ recessed steel conduit as required., supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required., supply of 20 watt led batten surface mounted suitable for operation on 230 volt,50hz ac supply, complete etc as required., supply of 400 mm, 2100 rpm wall mounting swinging fan suitable for single phase 230 volt, 50 hz ac supply complete with motor, capacitor, mounting clamps etc. with all accessories as required complete., installation, testing and commissioning of pre-wired led fitting luminaries etc. of all types (surface/recessed) & street lights complete with all accessories. directly on ceiling/ wall , including connection with 1.5 sq.mm frls pvc insulated, stranded, copper conductor single core cable with flexible conduits and coupler and earthing etc. as required., installation of wall mount fan in the existing opening including making good the damage, connections, testing and commissioning etc. as required.upto 450mm sweep., supply of led street light of minimum lumen output of 3600 lumen made up of pressure die cast aluminum housing with membrane filter and have ip66 optical as well as electrical compartment with wide operating voltage range of 230+/- 10 percentage complete with all accessories as required., providing & fixing 32/40 mm dia b class gi

Central Government/Public Sector

CTN :41709819

26 Sep, 2025 NA

Jaipur - Rajasthan

Tender For supply of double acting door closer resting bracket ( block ) as per attached drawing and dimension for use in lhb coaches compartment door . sample to be approved by consignee before bulk supply.

Central Government/Public Sector

CTN :41617881

22 Sep, 2025 NA

Jaduguda - Jharkhand

Tender For supply of 18, piston ring 185 dia h3190151-1903394608 , 23- spares for air compressor, model- 1hx1t-18, rider ring h3211165- 1903394708 , 24- spares for air compressor, model- 1hx1t- 18, piston rod b4226151-1903422602 , 25- spares for air compressor, model- 1hx1t-18, o-ring h0211150 for valve cover , 26- spares for air compressor, model- 1hx1t-18, spring plate e2228151-1901008527 , 27- spares for air compressor, model- 1hx1t-18, backing ring for piston c6558151-1901008527 , 28- spares for air compressor, model- 1hx1t-18, spring for regulation h3475151 , 29- spares for air compressor, model- 1hx1t-18, spring valve holder h3413011 , 30- spares for air compressor, model- 1hx1t-18, suction valve seat assy z2545150 , 31- spares for air compressor, model- 1hx1t-18, discharge valve seat assy z2545150 , 32- spares for air compressor, model- 1hx1t-18, center stud discharge valve d3303150- 1903347708 , 33- spares for air compressor, model- 1hx1t- 18, helical compression spring h3477151-1903347708 , 34- spares for air compressor, model- 1hx1t-18, washer m361151-1901008528 , 35- spares for air compressor, model- 1hx1t-18, lift washer valve assy h0747150- 19031100408 , 36- spares for air compressor, model- 1hx1t-18, oil filter k0601102 - 1903060111 , 37- spares for air compressor, model- 1hx1t-18, suction filter w0862801 - 1903086222 , 38- spares for air compressor, model- 1hx1t-18, air filter w0849801 , 39- spares for air compressor, model- 1hx1t-18, nut cross head m2048151 , 40- spares for air compressor, model- 1hx1t-18, oil pump assy 29361151 , 41- spares for air compressor, model- 1hx1t-18, sleeve for piston c6558151 , 42- spares for air compressor, model- 1hx1t-18, intermediate sleeve packing c6541151 , 43- spares for air compressor, model- 1hx1t- 18, outer sleeve for packing d9637151 , 44- spares for air compressor, model- 1hx1t-18, after cooler tube bundle assy , 45- spares for air compressor, model- 1hx1t-18, cylinder , 46- spares for air compressor, model- 1hx1t-18, cross head , 47- spares for air compressor, model- 1hx1t- 18, cross head slide , 48- spares for air compressor, model- 1hx1t-18, c.h.bush , 49- spares for air compressor, model- 1hx1t-18, c.h. bush pin , 50- spares for air compressor, model- 1hx1t-18, valve cover suction , 51- spares for air compressor, model- 1hx1t-18, valve cover delivery , 52- spares for air compressor, model- 1hx1t-18, oil wiper ring h1443151 - 1903145908 , 53- spares for air compressor, model- 1hx1t-18, crank shaft , 54- spares for air compressor, model- 1hx1t-18, connecting rod assy con rod with bolt only

CTN :41567775

15 Sep, 2025 NA

Uttara Kannada - Karnataka

Tender For tender for supply of oily water separator spares : : - air eliminator , end plate , 2nd oil pump valve c w air solonoid , in line pre strainer epoxy coated c/w basket 60 mesh , cp4-r2 oil probe pcb , 1st stage oil dump valve c w air solenoid , cell wiper ring , advanced granular media , air regulator & pressure gauge , perforated plate with rubber seal , diverter valve c w air solenoid , 1st stage pack cs 250 , 1st stage media pack-filter pack , wadding filter mesh , feed pump no motor included , gasket set cs 250 , air eliminator repair/kt , coalescer , draw bolt , wing nut , end plate , pressure gauge , pressure relief valve 50 psi , water valve , gasket set

Central Government/Public Sector

CTN :41507722

10 Sep, 2025 4.22 Lacs

Porbandar - Gujarat

Tender For defect rectification on various electrical and hull defects onboard icgs c-445 - h-215: 04 in nos partition to be provided in computer rack for storage of file and books. in way jobs include;-(a) relocation of television.(b) 04 nos partitions in ss rack., h-212:08 nos ladder steps in main alleyway ladder found cracked and worn out. steps to be renewed with anti-slip grips as per sample. nut bolts of steps to be renewed.qty -08 nos, material-al., h-217: 01 in no sofa for sitting arrangement in wardroom to be fabricated and fitted. job include:(i) fabrication of 01 in no sofa as per sample.(ii) fitment of sofa in position.(iii) removal and fitment of existing fitting racks.(iv) fabrication of sofa covers. (v) rearrange of dining table. sofa size- 2500 x 500 x 350 mm, l-077: base plate, rotary volume switch socket and junction box of 02 in nos main broadcast system speakers at bridge top and quarterdeck deteriorated due to weathering. mb speakers to be disconnected from junction box and fabrication of base plate, socket and junction box to be carried out, connectorisation of speakers to be done and mb system to be proved for satisfactory operation. specifications of base plate, rotary switch and junction box are as follows:- (a) base plate- 24cmx14cmx10cm, mat-ms is- 513, powder coated.(b) junction box- 9.5cmx8.5cmx6.5cm, mat- ms is-513, powder coated.(c) rotary volume switch-1 pole, 5 way, h-216: chalk test of main engine ventilation flap air tight door observed suboptimal. minor crack and pitting observed on aluminium flap and frame. defect to be rectified by renewal of ventilation flap including cutting and metal buildup of frame. chalk test to be proved. in way jobs includes removal, fitment, machining, welding of door and frame. door size-(1000 x 2000 mm). ventilation door -01 no, mat - al., h-218: aluminum rack for storage in waterjet compartment to be fabricated as per sample. material-aluminum. size- (l x b x h) (3ft x 2ft x 1ft)., h-219: storage box to be fabricated for storage of machinery spares in waterjet compartment (mat- al, qty - 01 no, size - 100 cm x 50 cm x 50 cm)., 01 in no ba controller board to be fabricated as per sample. material : wood/ sunmica.

Central Government/Public Sector

CTN :41557162

24 Sep, 2025 NA

Kapurthala - Punjab

Tender For supply of compartment door (two types)

Central Government/Public Sector

CTN :41498665

15 Sep, 2025 NA

Bengaluru - Karnataka

Tender For supply of double acting ac compartment swing door assembly for ac coaches

Central Government And Public Sector

CTN :41481948

12 Sep, 2025 NA

Bongaigaon - Assam

Tender For supply and installation of double acting ac compartment swing door assembly for ac coaches as per icf drg no. -icf/sk3-5-6-014 col-i & col-ii alt f and icf specification no.- icf/md/spec-268, ( 1 set consisting of 01 no door of col-i and 01 no door of col-ii).

Wiper Ring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors