Latest wire clamp Tenders | Government wire clamp Tenders

Central Government/Public Sector

CTN :41348444

13 Aug, 2025 NA

Kapurthala - Punjab

Tender For set of carline for amrit bharat scn coach, as per drawing: mp24calabscn ver sion 2, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dented during transport ation, storage, handling and lifting and to avoid scratches on outer surface suitable environment friendly cushioning material is to be placed between two segments, trans it damage if any shall be at the cost of supplier. the packing cage/structure to be fabr icated by using sq. tubes channels/angles having sufficient strength to bear approxim ate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fas tening mechanism to facilitate easy unpacking & unloading. it should have firm's identif ication/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing ca ges from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period : 30 months after the date of delivery ]

State Government

CTN :41313521

18 Aug, 2025 1.75 Crore

Chakrata - Uttarakhand

Tender For replacement of existing acsr conductor by arial bunch cable with supply and erection of associate material at villages bhoriwala rishi etc. under edsd, vikasnagar under edd, vikasnagar - material, supply of dead end clamp with ihook, supply of distribution box clamp with nut & bolts both 1 & 3 phase, supply of suspension clamp ihook with nut & bolts, supply of pole clamps with nut & bolts, supply of shead head type insulation peericing connectors, jumpring for jumpring to line to line tapping. (70x70sqmm, 70x35 & 70x16sqmm) etc.., supply of lt bare neutral connector pg clamp made of a.l 50x50 sqmm double bolt for line to line jumpering, supply of lt bare neutral connector pg clamp made of a.l 50x16 sqmm double bolt for line to line jumpering, supply of mid span insulated jointing sleeves subatiable for lt abc as per upcl specification., supply of head shrink type of cap sutaiable for lt acb as per upcl specification., smc 3phase lt distribution box for new & replacement of damaged old distribution box both 1 & 3 phase., smc 1phase lt distribution box for new & replacement of damaged old distribution box both 1 & 3 phase., supply of ms clamp with nut & bolt, pole & other size pole., supply of 1x35sqmm xlpe including a.l cable, supply of ms stay clamp for pcc pole sp-21, sp-10, sp-23 made of ms flat size 50x6 mm with 2 nos, nut & bolts size 65x16mm for suspension clamps assemble without cracks & borst painted by primer, supply of special type holding clamps for gi hooks with nuts & bolts, supply of 1x35sqmm all lugs, lt ab cable 3 95+1 50 sqmm, lt ab cable 3 35+1 25 sqmm, labour, dismantling of old acsr conductor (dog/weasel) (lt line) including re- rolling back its conductor, wire, clamp insulator etc. including stacking & transportation of material to the upcl store : 3 phase 4 wire 2 phase 3 wire, carrying the material from dump store to site of work mannual (approx dis. 01 km), carrying the material from dump store to site of work head load (approx dis. 00-01 km) cable & other materials, erection & grouting of pole for long span for reducing span, erection of stay set 16x1800 sqmm, laying, stringing and sagging of ab cable size (3x95+1x50sqmm), laying, stringing and sagging of ab cable size (3x35+1x25sqmm), fixing of dead end clamps with ihook, fixing of distribution box clamps with nuts & bolts, fixing of suspension clamp with ihook n&b, fixing of pole clamps with nuts & bolts, fixing of shere head type insulation peering connectors jumpering for line to line/tapping 70-70sqmm, fixing of shere head type insulation peering connectors jumpering for line to line/tapping 70-35sqmm, fixing of shere head type insulation peering connectors jumpering for line to line/tapping 70-16sqmm, fixing of lt bare netural connectors pg clamp made of a.l 50sqmm to 50sqmm double bolt., fixing of lt bare netural connectors pg clamp made of a.l 50sqmm to 16sqmm double bolt, erection of mid span insulated jointing sleeves suitable for lt abc as per upcl specification., fixing of heal shink type and caps suitable for lt acb as per upcl specification., erection of smc three phase lt distribution box (complete), erection of smc single phase lt distribution box with (complete), fixing of ms clamps, lt clamps for pole with nuts & bolts without cracks & burrs., fixing of 1x35sqmm xlpe including al. cable, fixing of ms stay clamp for pole, sp-21, sp-10, sp-23., fixing of special type holding clamps for ji hooks with nuts & bolt., fixing of 35 sqmm all lugs., removal of perivous connections & reconnection of single phase/three phase lt consumer service connection., fixing of aluminium lugs

Central Government/Public Sector

CTN :41201202

07 Aug, 2025 NA

Saharanpur - Uttar Pradesh

Tender For supply & installation of aerosol based fire detection & suppression system cartridge 100gm each (total 6 pie ces per unit coach ) , technical requirement in annexure-g1 of rdso specification no. rdso/pe/spec/ac/0192-2018(rev-1) & rdso le tter no. el/7.1.108/mssbc dated 17.09.21. these shall be installed in conventional memu motor coach at memu/sre or other shed. all necessary modification, clamping arrangement & accessories required for installation of this item shall be with the scope of this suppli er. note: location of installation of aerosol based fire detection and suppression system cartridge in conventional memu motor shall b e as per drawing mentioned in the rdso letter no. el/0.3.1 dated 19.09.2023 .material shall be procured from rdso approved source . [ warranty period: 120 months after the date of delivery ]

CTN :41288383

16 Aug, 2025 NA

Parganas - West Bengal

Tender For supply of carbide pad 6 pad , clamping cylinder seal , lifting cylinder seal kit , bend tension cylinder seal kit , clamping cylinder second vice , bundling cylinder seal kit , material indexing cylinder , gear box shaft

Central Government/Public Sector

CTN :41279694

20 Aug, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supply of retro reflective type aluminium 2 digit signal number plate (size 230mm x 153mm x 2mm) with clamping material. copy of drg. attached. details of required number plates for signal will be provided by consignee after issuing po. approval of material sample should be taken from consignee before bulk supply. material should supply at consignee depot sse/s/m/jbp . this item is not available in gem . [ w arranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41280616

14 Aug, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supply of retro reflective type aluminum 2 and 3 digit shunt signal plate with clamping mate rial. details as per drawing attached. approval of sample material should be taken from consignee before b ulk supply. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :41081463

01 Sep, 2025 NA

Bhilai - Chhattisgarh

Tender For corrigendum : supply of compression set apparatus for testing under constant strain (quick clamping type). technical specification details: (1) material of compression plates, spec-should be stainless steel, (2) dimention requi red (min) spec-45 mm x 10 mm x 130 mm, (3) no. of specimen tested at a time, spec- 03 nos. (min.), (4) operating temperature range, spec- 0 degree celsius to 120 degree celsius, (5) spacer, spec- 06 sets of s pacers, (6) operational ambience required, spec- open air, oven & hot water & is : 3400 (pt-10)/1977, mak e: prolific or elastocon or uniframe or pec or equivalent. [ warranty period: 30 months after the dat e of delivery ]

Central Government/Public Sector

CTN :41237451

25 Aug, 2025 NA

Kapurthala - Punjab

Tender For intergrated wtcc with end assly for lhb non ac coaches., as per drawing: lg 10180 except item no. 1 alt. 'k', packing instruction: 1. the supplier shall pack the integrate d wtcc in a suitably designed returnable fixture in such a way that integrated wtcc s hall not get scratched, damaged, twisted during transportation, storage and lifting and to avoid scratches on outer surface. it should be wrapped with enviroment friend ly material and it should have standard clamping /fastening mechanism so that it can b e opened easily. it should have firm's identification mark. 2. first returanable fixture al ong with integrated wtcc be retained by rcf & this fixture shall be exchanged in the se cond lot supply and so on. at the end of the contact, the firm shall collect the remain ing returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 1 tonne load in static & moving conditi on of two coach set of integrated wtcc. 4. the fixture /frame/pallet should be designe d so that the packed wtcc remain preferably in horizontal position to minimize surface area. 5. it should also be suitable for storage of integrated wtcc under open sky. [ wa rranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :41162217

12 Aug, 2025 NA

Khorda - Odisha

Tender For supply of dismantling and shifting of high tension line at proposed land of esi hospital duburi c c - 150x150mm rs joist 11 mtr long 30.6kg per meter each 336.6 kg , 11kv v cross arm , 11kv f clamp , back clamp for v cross arm , 11kv pin insulator polymer , 6 hw fitting term and condition 45kn , disc insulator term and cindition c 45 kn polymer , ht stay set complete , ht stay insulator , ht stay clamp 1.95kg per pair , 7 or 10 swg stay wire 10kg per stay , 11kv icore, 100sqmm xlpe insulated aaa conductor unarmoured , 100x50x6 mm g 1 channel each 2.8 mtr. long 9.2kg per mtrx 2 no. , 75x40x6 mm gi channel each 2.8 mtr. long 6.8kg per mtrwith side angle , 50x50x6 mm gi angle each 2.8 mtr. long 4.5kg per mtr with side angle , pg clamp for 100 mm2 aaa conductor , gi nuts and bolts of assorted size , earthing support coil type , danger plate , anti climbing device made of gi barbed wire, clamping arrangement etc. 2kg per support , sundries survey, tree cutting, insulation tape, small size nut bolt, clamp, binding wire, sockets , concreting work of 11 mtr gi pole , material cost for concreting of stay wire , dismantling of rs joint of 11 mtr long , dismantling of pole of 8 mtr long psc pole , dismantling of aaac conductor

Wire Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors