Latest wire ending clamp Tenders | Government wire ending clamp Tenders

Central Government / Public Sector

CTN :45054891

13 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of others - released, condemned and unserviceable non ferrous- brass scrap of sse-rrd-ohe-scmn containing released & un-serviceable contact wire, dropper clips, contact wire swivel clips steel wire ending clamps p.g clamps 1041-2 & 1031-2, catenary splices brass connectors, contact wire splices, terminal connectors, catenery suspensions clamps, section insulator grips (trailing/falling). total auctioned qty is 635.993 kgs . gst-18 percent and hsn code - 740400. sale and delivery by weight. bidders are requested to inspect the lot themselves prior to bidding.

CTN :45044995

21 May, 2026 NA

Udhampur - Jammu And Kashmir

Tender For supply of headless compression screw 3mm titanium , headless compression screw 2 point 4 mm short thread titanium , hydroxyapatite coated tapered schanz pin size 4 point 5 or 3 point 5mm , hydroxyapatite coated schanz pin size 6 or 5 mm , paediatric rail fixator system rail 150 mm long 02 x clamps 2x cd units threaded schanz screws 4 point 5 and 5mm x 4 point 1 set , mono rail external limb reconstruction system consisting of 1 x mono rail 300 mm 1 x central clamp 1 x square cd unit 80mm 01 x t clamp 1x swivel clamp 1 x end clamp , polybutylate coated braided polyester orthosuture size 2 half circle taper cut 45mm single needle ethibond sterile foil with single thread box of 10 or 12

CTN :44959083

04 May, 2026 NA

Manendragarh - Chhattisgarh

Tender For corrigendum : supply of drilling spare parts and conventional rig pump spares d d ? g? g - nq locking and guide coupling , nq innertube latch with spring , nq overshot latch with spring , nq shutoff valve nylon material , nq landing ring , t6 bearing , t8 bearing , t10 bearing , nq pin to nw pin adapter for hoisting plug , wash pipe for high speed water swivel , packing for high speed water swivel set of five , o ring for high speed water swivel , spring for high speed water swivel , nw pin to nq box adapter for tape , heavy duty u clamp 19 mm , nq hydraulic chuck jaw set of 04 for rd100 , chuck pinion with screw for rd 100 , hydraulic chuck t bolt , heavy duty u clamp 22 mm , water swivel packing 81 mm nylon , wash pipe for conventional water swivel , wireline clutch finger set complete assy , hydraulic fixed cylinder check nut gunmetal or brass , hydraulic feed control valve , hydraulic main pressure valve , gps 125 mud pump liner , gps 125 mud pump piston rod , water pressure guage for mud pump 6 inche dial size , hydraulic pressure gauge 6000 psi , hydraulic fixed cylinder bucket ) /bid number : gem/2026/b/7459176 * /dated: 21-04-2026 & & / bid document 1 / 32

Central Government/Public Sector

CTN :45048515

12 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of feeder wire ending clamp 150 sq. mm (ri no. - 1131, 1102 & 1104),( complete with fasteners.) as per drawing no. - eti/ohe/p/1130 or latest and as per rdso specification ti/spc/ohe/fittings/0130-10/13-rev-1 or latest . note-material to be procured from rdso approved source only. rdso id 3100652. sub-item id 3100652007 [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45050293

25 May, 2026 NA

Medak-T - Telangana

Tender For supply of steel wire ending clamp (90) (1131, 1361 & 1362) with fasteners as per rdso.spec:ti/spc/ohe/fittings/0130-10/13-rev-1 & as per rdsos drg. no.eti/ohe/p/1361,1362,1131 latest. make/brand: rdso approved vendors accepted only. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45050330

25 May, 2026 NA

Medak-T - Telangana

Tender For supply of contact wire ending clamp (107) i.d.no: 1118-3 (body) and 1119-3 (wedge), as per rdso drawing no eti/ohe/p/1110-2, rev,-e and rdso specification no: ti/spc/ohe/fittings/0130 or latest. rdso approved vendors accepted only. [ warranty period: 30 months after the date ofdelivery ]

Central Government/Public Sector

CTN :45025915

18 May, 2026 NA

Chalakudy - Kerala

Tender For supply of feeder wire ending clamp 150 sq mm (ri no.1131,1102&1104) with fasteners as per drawing no. eti/ohe/p/1130 & rdso spec no.ti/spc/ohe/fitting/0130(10/13) or latest .core approved sources only will be accepted. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45037600

20 May, 2026 NA

Mahabubnagar - Telangana

Tender For supply of large span wire ending clamp (130) complete assembly (r.i.no:1131, 1102& 1143) with fasteners as per rdso specification: ti/spc/ohe/fittings/0130-10/13-rev-1 or latest, drawing: eti/ohe/p/1140 or latest, str: core-str-16 rev-1 or latest. rdso approved vendors accepted only. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :44998227

14 May, 2026 NA

Guntur - Andhra Pradesh

Tender For supply of contact wire ending clamp complete assembly, clamp body (part no.1118-3), wedge (part no.1119-3) and part no.263 with fasteners (split pin & washer) suitable for 107 sq. mm contact wire as per specification: ti_spc_ohe_fittings_0130_with a_c_slip_no_1,eti-ohe-13 (4-84) may 2018 or latest, drawing: et ohe p 1110-2 or latest, str: core-str-19 or latest. [ warranty period: 30 months after the date of delivery ]

CTN :44926927

27 Apr, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply and delivery of school requisites 2026 - angle grinder-grinding wheel, diameter 110 mm , power range, 750w to 2000w, 240v + key (eu), band saw-table size 400 x 548, mm, 900 w or 340 x 335 mm, 350, w 240 v + blade and sense (eu), bench drilling machine-13mm, chuck, 240v, minimum table size, 260 x 180 mm + chuck key (eu), bench grinder-minimum 250 w,, 240v, circular saw-minimum 1.5kw,, 240 v + fence and cross-cut guide, (eu) (table mounted), compressor -output 50l/min, 6, bar, 340 w + supply hose and clips, (eu), spraygun-0.7 mm nozzle, diameter, 800 cl capacity (approx), (0.7 mm - 1.4 mm), drilling machine (portable)-, chuck diameter 3 - 16mm, 240 v +, chuck key, extension cable-20 metres, hot wire cutter-40 w, 240v, jig saw (portable)- power range, 300 600 w, 240v + allen, key(eu), metal lathe-1.5kw, distance, between centres 750 mm, including tool bit, boring bar,, knurling tools, parting tools, tail, stock, chuck key, centre drill, dead, centre, revolving centre, face, plate, 4-jaw and 3-jaw chucks., (eu), planer / thicknesser-maximum, planing width 310mm,maximum, thicknesser capacity 230, mm,power range 3kw to 4kw,, 240 v + fence(eu, router (portable)- power range, 1200w to 1800 w, 240v + key, (eu), sander orbital-power range 250, w to 300 w, 240v (eu), soldering iron-80 w, strip heater-140 w, 240v, welding machine-electric arc, 6kw, 150a, 240v (with protective, casing) incluing clamp, cables and, shield. (eu), wood working lathe-distance, between centres 1093 mm, 550, w, 500 - 2000 revolutions per, minute including face plate, dead, centre, revolving centre, turning, tools and tool rest., abrafile frame-4" deep/blade, length 6" (+ blade on frame), adjustable spanner-jaws open : 22, mm length: 200 mm, adjustable spanner-jaws open : 31, mm length: 300 mm, anvil-50kg, bench hook*-material: beech, size:250 mm x 150 mm, bench shear (guillotine)- up to 4, mm sheet and 10 mm rod, bradawl-minimum blade length, 32 mm, carpenters mallet-4.5 head width, centre punch-round head,, knurled body, 4" length, centre square-std size 75 mm, chisels- mortice-size: 6 mm, chisels- mortice-size: 9 mm, chisels -bevelled edge-size: 12, mm, chisels -bevelled edge-size: 19, mm, chisels -bevelled edge-size: 25, mm, chisels- firmer-size: 6 mm, chisels- firmer-size: 12 mm, chisels- firmer-size: 25 mm, cold chisels-type: flat, size:150 mm x 12 mm, combination drill-std drill set, combination pliers-size: 200 mm, coping saws-blade length: 150, mm, corner clamps-cramping capacity, 4" mild steel type, countersunk bit-head diameter:, 3/8" length: 2", dividers-length 6", engineers square-length 6", engineers vice-jaw width: 6", engineer's swivel base table (50, mm), forstner bit-bit set: sizes 10, 12,, 15, 16, 18, 20, 22, 25, 26, 28, 30,, 35, 40, 45 & 50 mm, gcramps-capacity: 6", gcramps-capacity: 12", hacksaw-non-adjustable 12", tubular frame wing nut tensioning, device for 12" blades, hammer: ballpein-0.5 lb, hammer: ballpein-0.75 lb, hammer: ballpein-1 lb, hammer claw-0.5 lb, hammer cross pein-0.75 lb, hand drill-chuck capacity 8 mm, hand files including handles-size:, 6", hand files including handles-size:, 8", hand files including handles-size:, 10", hand saws-22" long - cross cut, hand saws-22" long -rip, inside calipers-arm length 6", jack plane-14" long, jenny calipers-arm length 6", junior hacksaw-length blade 6", machine vice-maximumm jaws, opening 85mm, marking gauge-minimum length, 240mm, marking knife-length of body, 15cm, measuring tape-measuring length:, range 3m to 5 m, metalwork bench-size 2010 x 810, x 800mm, mitre box-mitre block 9" long, (plastic), mole grip-length 7, nail punch-set of 4 nail punches;, 1.5, 2.5, 3 & 5 mm, needle files-set of 6 - 14cm, oil can-2 pints capacity (1-2 pint), oil stone-150 mm length, outside calipers-arm length 6", pincers-length of body: 180 mm, pipe wrench-length: 300 mm, rasps-length size: 200 mm - 350, mm, ring spanner-set 6mm 25mm, riveting machine kit-sets rivets, up to 5 mm

Wire Ending Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector