Latest wire mesh jail Tenders | Government wire mesh jail Tenders

State Government

CTN :45722072

03 Jul, 2026 NA

Nashik - Maharashtra

Tender For supply of various necessary materials to the gram panchayat office.- steel 8 mm , steel 10 mm, , steel 12 mm, , steel 16 mm, , cement, , tiles, , khadi, , leaves iron, , leaves cement, , wash. road, , kach, , sand, , ill stomach, , quota flooring, , vita 4 ichi, , vita 6 ichi, , perling, , 300 mm cement pipe, , 200 mm cement pipe, , paver block, , cement block wheat, , pvc pipe 21/2 inches, , pvc pipe 3 inches, , iron next, , cement back, , kapaud next, , kapaud mesh, , pvc pipe 1/2 inch, , shavdahini, , led light 30 watts

State Government

CTN :45732711

07 Jul, 2026 49.6 Thousand

Mahendragarh-Hr - Haryana

Tender For mazra khurd , anawas , sigri , group of 3 no. of habitations annual mtc.works for water supply - na cautionary sign boards gi barbed wire fencing 3. fencing with welded steel wire fabric 75 mm x 50 mm providing 1.20 metre high fencing with angle iron posts 50 mm x 50 mm x 6 mm at 3 metre centre to centre with 0.40 metre embedded in m15 grade cement concrete, corner, end and every 10th post to be strutted, provided with welded steel wire fabric of 75 mm x 50 mm mesh or 75 mm x 25 mm mesh and fixed to iron posts by flat iron 50 x 5 mm and bolts etc. complete in all respects. i) adopt any one type of welded steel wire fabric 75 x 50 mm or 75 x 25 mm as per approved design. ii) the item of excavation and cement concrete in foundation shall be measured and paid separately

State Government

CTN :45732713

07 Jul, 2026 49.6 Thousand

Mahendragarh-Hr - Haryana

Tender For mazra khurd , anawas , sigri , group of 3 no. of habitations annual mtc.works for water supply - na cautionary sign boards gi barbed wire fencing 3. fencing with welded steel wire fabric 75 mm x 50 mm providing 1.20 metre high fencing with angle iron posts 50 mm x 50 mm x 6 mm at 3 metre centre to centre with 0.40 metre embedded in m15 grade cement concrete, corner, end and every 10th post to be strutted, provided with welded steel wire fabric of 75 mm x 50 mm mesh or 75 mm x 25 mm mesh and fixed to iron posts by flat iron 50 x 5 mm and bolts etc. complete in all respects. i) adopt any one type of welded steel wire fabric 75 x 50 mm or 75 x 25 mm as per approved design. ii) the item of excavation and cement concrete in foundation shall be measured and paid separately

State Government

CTN :45732715

07 Jul, 2026 49.6 Thousand

Mahendragarh-Hr - Haryana

Tender For mazra khurd , anawas , sigri , group of 3 no. of habitations annual mtc.works for water supply - na cautionary sign boards gi barbed wire fencing 3. fencing with welded steel wire fabric 75 mm x 50 mm providing 1.20 metre high fencing with angle iron posts 50 mm x 50 mm x 6 mm at 3 metre centre to centre with 0.40 metre embedded in m15 grade cement concrete, corner, end and every 10th post to be strutted, provided with welded steel wire fabric of 75 mm x 50 mm mesh or 75 mm x 25 mm mesh and fixed to iron posts by flat iron 50 x 5 mm and bolts etc. complete in all respects. i) adopt any one type of welded steel wire fabric 75 x 50 mm or 75 x 25 mm as per approved design. ii) the item of excavation and cement concrete in foundation shall be measured and paid separately

State Government

CTN :45722922

15 Jul, 2026 2.45 Lacs

Satna - Madhya Pradesh

Tender For supply of urchages sanitation material - alum, sanitizer, painting brush 4'', painting brush 6'', sgsv pipe (ceramic pipe 2.50x8), aggregate mix, iron rods (all sizes), iron nails (all sizes), iron angle, iron flat bar, cement sheet (8 ft long), steel mosquito mesh (3 x 1/2 width), chain-link fencing mesh (5 ft width), iron sheet (16 mm), iron pipes (all types), toughened glass (2.6 x 2 ft size), steel tap, kangaroo hp-45 large stapler

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45726004

13 Jul, 2026 NA

Tirunelveli - Tamil Nadu

Tender For purchase of mechanical lab equipments - hydraulic cylinder - bore diameter : 50 mm , stroke length : 250 mm, working pressure : 160 bar , cylinder tube : honded steel , piston rod : hard chrome plated , seals : standard industrial seals, end caps : steel, hydraulic operated directional control valve (dcv) - type: manual spool type dc valve, configuration : 4/2 way, size : ng06(cetop 3) , rated pressure : 210 bar, flow capacity: 20 - 40 lpm, body: hardened steel / cast steel, spool: ground and hardened, ports : clearly marked ( p, a, b, t ) , supply : mounted on training plate , suitable for dismantling and study, a) sliding mesh gear box for dismantling and assembing - max transmitted power 1 to 1.5 hp , torque capacity - 40 to 200 nm,number of speed 3 to 6 , gear module 1.5 to 2 , . gearbox type : sliding mesh forward gears - 3, reverse - yes, gear material - alloy steel, lubrication - splash/ oil, gear teeth : spur, typical gear ratio - 3:2:1 / 2:0:1 /1:3:1, input speed : 0-1800 rpm , housing material : cast iron (b) constant mesh gear box cut section - constant mech gearbox (cut section), gearbox type : constant mech, forward gears : 4 , gear teeth- helical/spur ,dog clutch type - sliding ,lubrication - oil sae 80w90 ,housing - cut section,material -hardened alloy steel, educational features - labelled parts, 3d printer - build volume : 256x256x256 cu.mm ,shell enclosed (plastic & glass ),nozzle 0.4 mm stainless steel included ,max hot end temperature 300 c ,nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm, build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate. max build plate temperature 100 c ,max speed of tool head 500 mm/s ,max acceleration of tool head 20 m/s2 ,supported filament pla, petg,tpu, pva, pet,abs, asa chamber monitoring camera low ,rate camera 1280 x 720/0.5 fps ,timelapse supported ,filament run out sensor : yes, control board fan closed loop control ,auxiliary part cooling fan closed loop control ,air filter activated carbon filter

CTN :45498835

02 Jul, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of oblique 2 inch long for aluminium t oblique l , aluminium t channel powder coated size 1 point 5 inch x 1 point 5 inch having thickness 1 oblique 8 inch , gi wire 4 mm thickness , gi wire 2 mm thickness , aluminum curtain rod 3 oblique 4 inch dia , aluminum curtain rod side holder 3 oblique 4 inch dia as per sample , steel curtain rod 1 inch dia as per sample , ss curtain rod side holder 1 inch dia with clamp and clamping screw and rawel plug 5 mm as per sample , plastic door with frame 0 point 75 x 2 point 1m ready made plastic door as per sample , door frame of size 1point10 x 2point10 m made of hard wood of size 10 cm x 7point5 cm thick as per sample , fly proof wire mesh steel wire dia 24 swg 15m long 4 ft width as per sample , floor door stopper small heavy duty , wooden ply cutting blade , waterproof adhesive sh marine , standard epoxy adhesive 180 gms , vinyl flooring sheet 1mm thickness , pbs roll 1 point 5 mm thick 01 mtr width 20 mtr length , oil stone 6 inch x 2 inch x 1 inch , glass cutter mechanical , tinted toilet window glass pan 6ft x 4ft x 3 mm , glass pan 6ft x 4ft x 4 mm , glass putty , looking mirror 2ft x 4ft aluminium beading as per sample , looking mirror 2ft x 1 point 5ft aluminium beading as per sample , ravel plug pvc 4mm oblique 6mm , door handle aluminium 4 inch , haxsaw blade 1 oblique 2 inch high speed 1ft long appx , haxsaw blade 1 inch high speed 1ft long appx , epoxy compound putty sealant adhesive for leakage 100 gm , suction pump for clearing blockage bathobliquetoilet 3 inch dia , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm colour sky blue , pgi sheet 8ft x 3ft x 1mm , tower bolt aluminium 6 inch , tower bolt aluminium 8 inch , tower bolt aluminium 10 inch , door closer helical as per sample , door closer hydraulic as per sample , sliding bolt 12 inch , sliding bolt 8 inch , handle consealed 4 inch , handle folding 3 inch , plastic bush 2 inch length and thick 12 mm , ss screw 1 oblique 2 inch 500 nos , ss screw 3 oblique 4 inch 500 nos , butt hinges ss 3 oblique 4 inch x 3 oblique 4 inch x 3 inch , tower bolt 4 inch , curtain socket one side 1 inch matki , ss handle 6 inch , ss handle 4 inch , furniture pvc edge band tape 3 oblique 4 inch ivory 50 mtrs , furniture pvc edge band tape 3 oblique 4 inch wooden 50 mtrs , sand paper 120 oblique 100 , ceramic tiles 0 point 30m x 0 point 30m x 6 mm thick , ceramic non skid tiles 0 point 30m x 0 point 30m x 6 mm thick , vertified tiles 0 point 60m x 0 point 60m x 8 mm thick , vetrified tiles 0 point 30 x 0 point 30 x 6 mm thick white colour , wall tiles 0 point 45 x 0 point 30 x 8 mm thick white colour , inter locking contract block oblique medium traffic precast concrete blocks different colour , wall clading tiles 240mm x 60mm x 9mm different colour , j hook 6 inch half threaded with nut and washers 8 mm , dr fix it , ultimate woodworking adhesive sh , dha iron appx weight of 01 kg , spade appx 1 kg wt , showel with handle appx 1 kg wt , pick axe appx 2 point 50 to 3 kg wt , crow bar 5ft long , plumb bob , mason thread plastic , spirit level size 12 inch , stabila spirit level type 70 mm , mason hammer 1 kg mbt riveting hammer head , mason hammer 1 point 5 kg , mason trovel small size , mason trovel iron big size , water level pipe 8 mm dia , road delineator with solar , speed braker rubber , 3 m cat eye indicator , road sign boards sample and drawings to be collected from work section , half round file 1 point 5 inch , right angle 12 inch , screw driver set of 6 pieces , cutting wheel 4 inch dia for angle grinder , construction black safety gumboots dash //bid details 2 / 116 black size 9 , dustless chalks white 100 no per pkt , tile cutting blade , carbon bush for tile cutting machine , tile cutting machine 120mm , ms square pipe 70mm x 70mm x 2 point 6mm th 6mtr length , ms square pipe 50mm x 50mm x 2 poin

CTN :45708619

04 Jul, 2026 NA

Multi City - Multi State

Tender For supply and fitment of industrial ro plant capacity 500 lph with 1000 l chiller tank with water level auto cut-in cut-out as per detailed technical specification in annexure a. the entire plant to be enclosed in iron frame and mesh on a raised platform. water outlet from chiller will be provided to 3 taps (minimum 3 feet distance from plant) outside plant iron enclosure along with basin. ail electrical and plumbing work included [ warrantyperiod: 30 months after the date of delivery ] ]

Wire Mesh Jail Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector