Latest wire punch Tenders | Government wire punch Tenders

CTN :41117346

31 Jul, 2025 24.94 Lacs

Multi City - Karnataka

Tender For procurement of various materials for the new construction of cc drainage and others works under nrega scheme in andalagi gp limit phase 3 - add 2 4% centering charges (since centering area increased) andalagi0, add watering charges at 1 % on material andalagi0, add watering charges at 1% on labour andalagi0, painter class i andalagi0, add brush, putty, sand paper at 2% on cost of paint andalagi0, water proofing cement paint andalagi0, add providing and removing scaffolding at 3% on labour andalagi0, burnt bricks class 35 (non modular) andalagi0, mason class ii (with tools) andalagi0, hom of vibrator 0.71 days andalagi0, plasticizer / super plasticizer andalagi0, add handling, loading and unloading at 2% on material andalagi0, silver oak or equivalent planks 38 mm thick andalagi0, jungle wood runners and planks andalagi0, binding wire andalagi0, tmt bars fe 500 andalagi0, add handling, loading and unloading at 1% on material andalagi0, casurina poles 100 - 150 mm andalagi0, boulders andalagi0, size stone 20 x 20 x 25 cms andalagi0, mixer (concrete small used in culvert) andalagi0, bond stone 20 x 20 x 45 cm andalagi0, rubble stones andalagi0, add watering charges at 1% on material andalagi0, mixer (concrete) - 1 cum capacity andalagi0, portland cement andalagi0, coarse sand (zone iii) andalagi0, broken stone aggregate 12 mm to 10 mm size andalagi0, broken stone aggregate 20 mm size andalagi0, broken stone aggregate 40 mm size andalagi0

CTN :41091157

31 Jul, 2025 7.36 Lacs

Ranebennur - Karnataka

Tender For supply of for material for nrlm shed work site at karur gp under mgnrega scheme - tmt bars fe 500_ nrlm work site at karur gp, portland cement_ nrlm work site at karur gp, ceramic tiles 30 x 30 cms_ nrlm work site at karur gp, reeded glass 3 mm thick_ nrlm work site at karur gp, vitrified tiles 600x600 mm_ nrlm work site at karur gp, white cement_ nrlm work site at karur gp, cast iron spike_ nrlm work site at karur gp, anchor bolts 750mm_ nrlm work site at karur gp, solid concrete blocks 40 20 20 cms 5 n sqmm_ nrlm work site at karur gp, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia_ nrlm work site at karur gp, pvc pipes 10kgf / sqcm 90mm outer dia_ nrlm work site at karur gp, teak wood beading 20 x 20 mm_ nrlm work site at karur gp, casurina poles 100 - 150 mm_ nrlm work site at karur gp, tools and plants at 2% on material_ nrlm work site at karur gp, tools & plants and electrical charges at 2%_ nrlm work site at karur gp, add brush at 1% on cost of paint_ nrlm work site at karur gp, add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint_ nrlm work site at karur gp, add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material_ nrlm work site at karur gp, add cement sand and grit 1% on material_ nrlm work site at karur gp, add 5% for fittings and wastage charges_ nrlm work site at karur gp, handling loading and unloading 3% on material_ nrlm work site at karur gp, labour charges for lifting and placing in position and making connection at 7% on material_ nrlm work site at karur gp, add brush, putty, sand paper, roller at 5% on cost of paint_ nrlm work site at karur gp, add brush, putty, glue at 5% on cost of paint_ nrlm work site at karur gp, add 15% wastage_ nrlm work site at karur gp, add 5% wastage charges_ nrlm work site at karur gp, add cutting and other wastage 5%_ nrlm work site at karur gp, add providing and removing scaffolding at 3% on labour_ nrlm work site at karur gp, add handling , loading and unloading at 1% on material_ nrlm work site at karur gp, add handling , loading and unloading at 2% on material_ nrlm work site at karur gp, add watering charges at 1 % on material_ nrlm work site at karur gp, enamel metal paint_ nrlm work site at karur gp, ready mix primer paint (ready mix red lead paint)_ nrlm work site at karur gp, polyenthylene water storage tank of specified capacity l_ nrlm work site at karur gp, enamel paint_ nrlm work site at karur gp, dry distemper_ nrlm work site at karur gp, binding wire_ nrlm work site at karur gp, plasticizer / super plasticizer_ nrlm work site at karur gp, ms plates 40 x 6 mm _ nrlm work site at karur gp, ms square rod 16 x 16 mm _ nrlm work site at karur gp, ms plate 12 mm x 6 mm _ nrlm work site at karur gp, base plate / base plate_ nrlm work site at karur gp, gusset plates 6 mm thick_ nrlm work site at karur gp, ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre_ nrlm work site at karur gp, ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at 4.5 kg per metre_ nrlm work site at karur gp, whitening_ nrlm work site at karur gp, hom of cutting and grinding machine - 1_ nrlm work site at karur gp, mixer (concrete small used in culvert)_ nrlm work site at karur gp, add_ nrlm work site at karur gp, unit cost as per the specification_ nrlm work site at karur gp, lead or pvc connection pipe 32mm dia (for wash basin)_ nrlm work site at karur gp, c.i. / m.s. brackets for flushing cistern_ nrlm work site at karur gp, brass stop cock_ nrlm work site at karur gp, cp brass waste 32 mm of standard pattern_ nrlm work site at karur gp, cp brass chain with plug_ nrlm work site at karur gp, copper plated brass piller tap 15mm_ nrlm work site at karur gp, white vitreous china clay flat back wash basin size 550x400mm_ nrlm work site at karur gp, vitreous china orrisa type w.c. pan size 580 mm_ nrlm work site at karur gp, mechanic class ii/mechanic hmp grade i/eme grade_ nrlm work site at karur gp,

CTN :41101150

06 Aug, 2025 NA

Ernakulam - Kerala

Tender For custom bid for services - defect rectification of acsr 2 (south tower)-defect., in has reported that tracks are not available on display of acsr #2., defect identification., di for the same was undertaken on 13 jun 2025. it was found that the pedestal unit, was required to be replaced to rectify the defect., scope of work to undertake defect rectification., 1. spare part., the required pedestal unit for replacement will be provisioned by in on site. all other, components/ units of acsr #2 should be in place to operationalize the system., 2. manpower., three skilled technicians will be required to undertake the pedestal replacement work., one tower climber also needs to be available on site. the tower climber and two, technicians will be provisioned by hela., 3. material/ machinery., one overhead crane with a loading capacity of one ton lifting to a height of 35 mtrs is, required to undertake the work. the same will be provisioned by in., 4. tools and accessory., the following are required and will be provisioned by hela:-, (a) torque wrench, (b) level indicator, (c) eye hook -02, (d) two 50 mtrs rope, (e) silicon, (f) drill machine, (g) lubricant, (h) slings for lifting, 5. activity to be undertaken., the sequence of events for replacement of pedestal unit will be as tollows:-, (a) disconnect and remove all cables, wave guide ard units from the antennae assembly., (b) fitment of lifting eye hook on antenna and pass lifting slings to the eye hook. dismantle antenna from pedestal unit and keep it on even surface on, the ground with the help of overhead crane. special care is o be undertaken while handling waveguide., (c) hook on the pedestal unit on overhead crane and op an securing bolts, of pedestal unit. lift the pedestal and move to the ground with cap closed of all connectors., (d) hook up new pedestal and lift it to the tower top and w hen aligned with, the position of pedestal plate lower the pedestal on the plate and tight the nut, bolt with level indicator on top of the pedestal to confirm tht the same is at, zero level., (e) lift the antenna to the top of tower and fix it to the pede stal unit., (f) install all units of acsr on top of tower and fix connectors and waveguide to the antenna., (g) switch on power and carry out power checks and fo (hecks., (h) switch on the acsr server and carry out alignment of system to get the tracks appeared on the display., 6. safety., all man working on tower should wear safety belt, safety helmet and safety belt to be, tied on two rigid point at tower top. the man below tower for handlin activity should, wear helmet. the antennae assembly and pedestal unit should be se cured with twopoint safety rope while lifting and lowering the same to avoid any dan age to the man, and material view heavy wind, lifting jerk or swing of the crane sling., .

CTN :41024712

25 Jul, 2025 6.41 Lacs

Multi City - Karnataka

Tender For for the procurement of school compound work cuntsruction of various materials gp uppanasi - display board / cib_1upi, lumpsum material_1upi, painter class i_1upi, add brush, putty, sand paper at 2 percentage on cost of paint_1upi, water proofing cement paint_1upi, add providing and removing scaffolding at 3 percentage on labour_1upi, add handling , loading and unloading at 1 percentageon material_1upi, casurina poles 100 to 150 mm_1upi, brick_1upi, add formwork at 4 percentage out of material and labour_1upi, mason class i (with tools)_1upi, broken granite metal 10 mm_1upi, granite metal 20 mm_1upi, granite metal 40 mm_1upi, mixer (concrete small used in culvert)_1upi, bond stone 20 x 20 x 45 cm_1upi, rubble stones_1upi, add watering charges at 1 percentage on material_1upi, mixer (concrete) 1 cum capacity_1upi, portland cement_1upi, coarse sand (zone iii)_1upi, broken stone aggregate 12 mm to 10 mm size_1upi, broken stone aggregate 20 mm size_1upi, broken stone aggregate 40 mm size_1upi

Central Government And Public Sector

CTN :40663529

21 Jul, 2025 18.44 Lacs

Chamba - Himachal Pradesh

Tender For corrigendum : supply of runner handling tools

Central Government/Public Sector

CTN :41017352

30 Jul, 2025 NA

Bangalore - Karnataka

Tender For supply, installation and commissioning of superconducting qubits based quantum computing facility - qubit processing unit (qpu), superconducting quantum processing unit (50 to 100 qubits) with microwave package, travelling wave parametric amplifier (twpa), other cryogenic component sets, fully functional dilution refrigerator, dilution refrigerator for supporting the qubits offered and further scalable to 250 qubits with needed support systems and components, full capacity dr wiring for supporting the qubits offered and further scalable to 250 qubits., control electronics and peripherals, control electronics for supporting the qubits offered and further scalable to 250 qubits with wiring and sub components as required, networking equipment and it infrastructure, high-speed networking infrastructure, quantum-specific networking hardware, secure data storage solutions, networking equipment for iot integration, iot infrastructure and telemetry, integrated telemetry and monitoring systems, iot sensors and devices (cryostat to control electronics), key metrics generation tools, predictive maintenance software and tools, real-time data collection and analysis systems, emi/emc compliance, emi shielding and grounding solutions, emc testing and certification, filtered power supplies, installation and integration services, system installation and setup, training for operation and maintenance, training on planar design and fabrication of qpus, documentation and knowledge transfer, service and support, comprehensive onsite support and maintenance for atleast 3 years, maintenance tools and spare parts, miscellaneous costs, shipping and handling, customs and duties, installation tools and equipment, any other cost

Central Government And Public Sector

CTN :40873660

22 Jul, 2025 NA

Bangalore - Karnataka

Tender For manufacture, supply and installation of cross beam girder (size of beam 11 meter long, cross section 500 mm height & 180 mm width approx.) of 3ton eot crane along with suitable long transverse ge ared motors 2nos as per rwf drawing no. 703402210640. note: 1. only crane manufacturers or their auth orized representatives with relevant expertise shall be eligible to participate in the tender. 2. the drawing attached is only for the general guidance. the supplier shall visit the rwf and take necessary data before c ommencing the work. 3. all raw materials necessary for the fabrication, including channels, plates, and stru ctural steel, shall be supplied by the supplier. 4. the supplier shall also be responsible for the transportatio n of all components such as the fabricated cross beam, hoist, channels, plates, etc., to the rail wheel facto ry (rwf), including both to and fro movements, and shall bear all associated transportation charges. 5. the supplier shall dismantling the existing electrical connections and the removal of the hoist assembly. proper support beams must be provided between the end carriages, and the cross beam (girder) must be carefully supported before the removal of mounting bolts. the cross beam should then be lowered cautiously to prev ent damage to surrounding equipment and shifted to the designated location. the temporary support beam for the end carriages shall be removed thereafter. 6. the supplier shall remove the existing long travel gea rbox along with its motor, and install a new gearbox and motor fitted with suitable gears and couplings. th e hoist is to be reinstalled in its original position, and all electrical connections must be restored accordingl y. once the mechanical and electrical installations are complete, the cross beam and associated structures shall be painted in yellow and black colors, adhering to standard safety norms for cranes. 7. rwf will provi de to the supplier with air, electricity, water, and welding/oxy-cutting consumables free of cost. however, t he supplier is required to supply all raw materials for fabrication and arrange all necessary tools, lifting tac kles, and handling equipment for the execution of the work. the supplier is also obligated to provide appro priate personal protective equipment (ppe) such as helmets, gloves, safety harnesses, and other safety gea r to all personnel working at the site. 8. after completion of all work, the supplier must conduct a load test of the crane and submit a valid load test certificate. throughout the execution, the supplier will be solely re sponsible for the safety of all workers engaged in the activity, and the entire work shall be carried out in co mpliance with applicable safety standards and rwf's guidelines. 9. the motor with gearbox for the lt mov ement shall have a minimum power of 1 hp, and its output speed shall be suitable to achieve an lt movem ent speed of at least 20 meters per minute. [ warranty period: 18 months after the date of delivery ]

Wire Punch Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector