Latest wires Tenders | Government wires Tenders

Central Government / Public Sector

CTN :45010670

03 Jun, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply, erection & installation of 't' shaped modular workstation having two keyboard pullout trays, two cpu trolleys, two storage encase metal pedestals, two ergo footrest and also provided with integrated cable management as per specification details mentioned below. 1) two workstations, each shall be of 5 feet( l) x 5 feet (w) x 4 feet(h) and the total combined 't' shaped modular workstation size: 10 feet(l) x 5 feet(w) x 4 feet(h) = 01 set(which is made up of 25 mm hpl/nfc engineered wood & 1 mm acrylic laminate). 2) all the interconnecting wiring for lan, power supply and telephone wires shall be done inside the cable management system(powder coated aluminium interlocking extrusions) and adequate ports shall be provided on the work surface. 3) standard communication & power accessories :- i) lan rj45 ports : 4 nos ii) telephone rj11 ports : 4 nos iii) power supplies 5 amp. sockets : 6 nos 4) all wires shall be brought out to interface boxes as one for power supply and another for the communication cables. these boxes shall bedesigned to accept connections from the control room circuits. 5) modular workstation material shall confirms to hpl/nfc engineered wood(25mm thickness) or its similar as per epd-ies-0012055 : 002 (s-p-12055) certification or latest if any. note:(1)firm shall quote any one make for the tendered description along with valid authorization, if vendor offers/bids for more than one make or if the firm mentions, 'as per tender' in their bid(s), their offer will be summarily rejected. (2) tenderer must submit technical leaflets/ details of the offered material like make & model no. along with their offer, otherwise such offers are liable for rejection. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45298367

04 Jun, 2026 NA

Ambala - Haryana

Tender For supply of copper braided (tin plated) 48 x 8 = 384 wires, wire gauge = 0.3 mm, with copper lug -70 sq. mm both sides hole size m-10 & m-12, length = 630 mm lug to lug [ warranty period: 30 months after the date of delivery ] ]

CTN :45297341

28 May, 2026 NA

Jamalpur - Bihar

Tender For supply of wooden hand with hardened and tempered stainless steel wire brush for cleaning metal and removing welding slag. material of wire-hardened and tempered stainless steel total length; 290mm-300mm, wire length -150mm-155mm, height of wire 32-35mm dia. of wire-0.10-0.30mm no. of wires in each bunch-14-16 nos., bristle area-4 or 5 x 16 to 20 rows. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45325976

03 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot miscellaneous scrap - scrap and unserviceable and condemened electrical light fitting such as street light ,led light,led flood light, alluminium tube light,cfl fitting, focus light,lamp , head light glass frame ,outer jumper body, cup,cfl refle3ctor cable cleat connector ring, high bay light and different kind of light fitting with or without attachment such as minor nf (copper ss, etc) chokes,ballast,rubber wires, plastic,fiber, glass, ceramic,ms, bulb, tubelight & various other attachment etc. (qty approx)

Central Government/Public Sector

CTN :45335198

01 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of argon gas + (1-5%) oxygen gas for ss welding. delivery in firm's returnable cylinder without any rent to our destination . capacity of cylinder 07 cubic metre. specn: as per irs m-46 (indianrailways standard specification for classification, testing and acceptance criteria of filler wires for mig/mag welding)table-1 sr. no. 6 argon gas +(1-5%) oxygen gas for ss welding. delivery in firm's returnable cylinder without any rent to our destination . capacity of cylinder 07 cubic metre. [ warrantyperiod: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45337850

05 Jun, 2026 NA

Liluah - West Bengal

Tender For pl-31712654 supply ofoil level swich kit consisting of 13 items. 1. oil level switch article no.- 1075758r000, qty-1 nos, 2. 2 core cable 1 sq mm, article no. 1070520r000 qty-3.62 mtr, 3.conduit ( nw 12) article no- pafr -12 b,3.12 meter, 4. screw hm8-16 a4-8,article no-1074465r000 4 nos, 5. washer m8 a4, article no-1044328r000 8 nos. 6.o ring gasket 3.53 int 44.04 article no- 1 075892r000 1 nos, 7.cable gland(m20 x 1.5) article no- sqfr-m20b12 -2 nos, 8. identification ferrule for connection wires 4 nos,9. identification label respective cld for conduit 2 nos, 10. cable tie for identification label( 80 mm) 4 nos, 11. cable tie for conduit fixing ( 300 mm) 6 nos, 13. pin type lugs size 1 sq mm 4 nos [ warranty period: 30 months after the date of delivery ] ]

CTN :45338483

15 Jun, 2026 NA

Asansol - West Bengal

Tender For supply of wooden hand with hardened and tempered stainless steel wire brush for cleaning metal and removing welding slag. material of wire- hardened and tempered stainless steel total length: 280mm -300mm wire length - 145 mm-155 mm height of wire- 30-35 mm dia of wire- 0.10-0.30 mm no. of wires ineach bunch- 14-16 nos. bristle area- 4 or 5 x16 to 20 rows. [ warranty period: 30 months after the date of delivery ] ]

CTN :45338776

29 May, 2026 NA

Malda - West Bengal

Tender For supply & installation of 04 seater cubicle work station table size:750w x 600d x 750/1050ht. (in mm), 45 mm thick panel 1050ht.750 x1050 & 600 x1050,45 mm thick panel 1050ht.p/f of panel based modular workstations of 45 mm thickness with extruded aluminum end post of size 45x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. top trim is of aluminum section of size 45x12mm and snap fitted on its base of size 45x20mm. the aluminum frame work is supported on lower and upper partition block. bottom block is made up of 9mm prelaminated particle board of desired shade which is pasted on 33x25mm thick particle board baton frame, which is properly screwed to end post and bottom electrical race way. upper block is fixed above the table top and is made up of particle battens fixed with 9 mm thick pin board and cloth of desired shade, optionally white board or glazing can be provided instead of pin board. raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. the raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. the modular switch & socket plates can be mounted & punched onto the raceway panels with easy cable connectivity & accessibility in case of any repairs etc. table tops to be made up of 25mm thick pre laminated particle board. the tops are supported on partition with the help of cantilevers. all work tops fixed at the standard anthropometric working height of 750mm from the ground level & finished with well filleted edges, thus making those users friendly. a circular hole is provided on every w/top to facilitate the easy connection of cpu & monitor wires & is covered with a modular wire manager made in abs. gable end is made up of 18mm pre-laminated particle board of desired shade and screwed to top with help of brackets. used to support w/tops at the exposed ends giving an openness to all workstations, cubicles etc. the keyboard trays are made out of 18mm thk plpb & mounted under the worktop with sliding channels [ warranty period: 30 months after the date of delivery ] ]

CTN :45320702

28 May, 2026 NA

Tinsukia - Assam

Tender For supply of high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786 (q2)

CTN :45303356

02 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of prefabricated tma arch wire with mushroom loop upper arch 017x025 size 30 pkt of 10 , prefabricated tma arch wire with mushroom loop upper arch 017x025 size 32 pkt of 10 , prefabricated tma arch wire with mushroom loop upper arch 017x025 size 34 pkt of 10 , prefabricated tma arch wire with mushroom loop upper arch 017x025 size 36 pkt of 10 , prefabricated tma arch wire with mushroom loop upper arch 017x025 size 38 pkt of 10 , prefabricated tma arch wire with mushroom loop upper arch 017x025 size 40 pkt of 10 , prefabricated tma arch wire with mushroom loop upper arch 017x025 size 42 pkt of 10 , prefabricated tma arch wire with mushroom loop upper arch 017x025 size 44 pkt of 10 , prefabricated tma arch wire with mushroom loop lower arch 017x025 size 24 pkt of 10 , prefabricated tma arch wire with mushroom loop lower arch 017x025 size 26 pkt of 10 , prefabricated tma arch wire with mushroom loop lower arch 017x025 size 28 pkt of 10 , prefabricated tma arch wire with mushroom loop lower arch 017x025 size 30 pkt of 10 , prefabricated tma arch wire with mushroom loop lower arch 017x025 size 32 pkt of 10 , prefabricated tma arch wire with mushroom loop lower arch 017x025 size 34 pkt of 10 , prefabricated tma arch wire with mushroom loop lower arch 017x025 size 36 pkt of 10 , prefabricated tma arch wire with mushroom loop lower arch 017x025 size 38 pkt of 10 , prefabricated tma arch wire with mushroom loop lower arch 017x025 size 40 pkt of 10 , prefabricated tma arch wire with mushroom loop lower arch 017x025 size 42 pkt of 10 , prefabricated tma arch wire with mushroom loop lower arch 017x025 size 44 pkt of 10 , niti closed coil springs with eyelet pkt of 10 for 150 to 200 gm 12 mm pkt of 10 , upper niti arch wire 014 ,pkt of 10 , niti open coil spring 0 point 012 into 0 point 030 thikness wire spool 15 inches , ars bur, pkt of 06 shape 856-010m , lower niti arch wire 014 ,pkt of 10 , open coil spring ss 0.010 x0.030 spool of 2 mtr , arch wires tma size 0.017x 0.025 lower small plain set of 10 , lingual sheath pkt of 10 size 0.036 , orthodontic silver solder spool of 8 to 10 mts , upper niti arch wire 016 ,pkt of 10 , crimpable hook cross section 0 point 016 into 0 point 022 inches by cross section 0 point 021 into 0 point 025 inches , flux for orthodontic solder bottle of 15 gm , lingual button bondable flat base pkt of 10 , arch wire tma size 0.017 x 0.025 lower small plain set of 10 , class ii corrector forsus frdez 25,29,32 , lower niti arch wire 016 ,pkt of 10 , rotation wedges clear, pkt of 100 , bonding system light cured with adhesive- kit complete , intrusion arch wire connecticut intrusion arch beta iii nickel free long lower 017x 025 pkt of 10 , closed coil spring niti with eyelet of 012 pkt of 10 , moisture insensitive primer , posted arch wire ss 016 x 022 length 36mm pkt of 10 , orthodontic band placement resin cement , ss orthopedic expansion screw hyrax lower , 9 mm , buccal shelf infra zygomatic crest implant size 2mm x 10mm , buccal shelf infra zygomatic crest implant size 2mm x 12mm , posted arch wire ss 016 x 022 length 27 mm pkt of 10 , posted arch wire ss 0.019 x 0.025 length 36mm pkt of 10 , headgear high and medium pull complete with orthopaedic force modules 500gm each , jasper jumper assorted sizes 26,28,30,32,34,36 , distal end cutter , pin and ligature cutter //bid details 2 / 44

Wires Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector