Get complete information related to latest Wood Frame Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Wood Frame Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Wood Frame Tenders.
Tender For supply of repair of office contingency items - repair of table and polishing work size 72x36x30inch , repair of table and polishing work size 60x30x30inc , repair and polishing of photo display boards size 30x150inch , repair and fitment of wooden frame and mirror , repair of 32inch digital standee information kiosk , repair of hangar evacuation plan board lights and replacement of evacuation plan sticker
Tender For preparation, supply and fabrication at site of furnitures items for staff quarters and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada. (package-2) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., library coffie table- supplying and placing center table in with an overall size 1200mm x 600mm x 450mm (h) that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywood with both side laminate finish. the four side of the table is provided 150 mm wide 18 mm thick play under the main work top plywood. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top frame and base frame and legs shall be supported on ms rectangle pipe frame having cross-section area 25mm x 25mm with 1.2mm thick with powder coated. there shall be ppcp shoe provided at the bottme to avoid scetching on the floor., side unit shall be provided with the bed at both side with an overall size 450mm x 450mm x 550mm. the side unit shall be made of 18mm thick waterproof plywood with both side laminate. it shall be supplied with one sliding drawer and one open drawer., dining table with six chairs, supplying & placing dining table with six chairs an overall size 1800mm x 900mm x 750mm. the top of the table shall be made up of 18mm thick teak wood. the top profile shall be in rectangular wooden shape with the edges shall be in chamfer shape. the under structure shall have teak wood having size 75mm x 75mm round shaped legs with melamine polish.there shall be shoe provided at the bottom to avoid scratches on the floor. dinning chair. the seat shall be made of 12mm thick waterproof plywood and season/teak woodframe upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m with leatherite tapestry 0.8mm thick and 535 gsm and the back shall be made of season/teak wood malemine polish finish frame. the frame structure shall be supportd by four legs made up of season/teak wood malemanie polish finish of size 50mm x 50mm. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 41010 mm(d) x 45010 mm(w) and back size shall be 44010 mm(w) x 56010 mm(h) from seat. overall height shall be 100010 mm., providing and supplying corner table with an overall size 600mm x 600mm x 410mm. the top should be made up of 75mm thick, it would be 25mm at mid and 75mm at sides. the mdf top should have decorative finish with approved veneer and pu polish accordingly. the understructure shall consist of 4 nos. of ms sheet gold leg with 6mm thick., providing and installation of large tv unit, carcass panel shall be made of 18 mm prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. drawer bottom shall be made of 12 mm thick prelaminated waterproof plywood. 4 drawer front shall be made of 18 mm thick prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. all drawers shall be fitted with knobs.top shall be made up of
Tender For supply of furniture - p and m of customized wooden big executive table with three drawer and both side laminate finish size 96x36 , providing and making of customized wooden side cum computer table with door and both side laminate finish size 60x18 , providing and making of customized wooden back side storage with door and shelf size 96x24 , providing and making of customized wooden book shelf both side laminate finish at door side 60x48 , new customized wooden frame wall paneling for four wall half partition 59x4 , new wooden wall paneling with high lighter including electric work full partition size 9x8 , new wall paper at 04 wall upper side 59x4 , providing and making of false ceiling border with gypsum sheet and gi frame 25x9 , new led strip profile light both side border , new led panel light 9 , new led panel light 2x2 , new 3mm pvc flooring-25x9 , new customized sofa set , new customized visitor chair , new customized centre table , customized wooden frame wall paneling from outside of the wall 13x19 , customized acrylic custom logo 2x2
Tender For corrigendum : supply of hussain cloth , plastic roll for packing material , bubble wrap , wooden frame for packing material , garness green brown
Tender For construction of gram panchayat building of lakshmeshwar taluk dodura village continued work supply of materials-, providing brick work with common burnt clay non modular bricks of class designatioll 3.5 in superstructure above plinth level in all shapes and sizes in cement mortar 1:6 (1 cement: 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. pwd csr for buildings vol ii for the year 2023-24. i. no., , providing mathi/nandi woodframes of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (vol-2 building sr, , providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete. fixed to openings /wooden frames with rawl plugs screws etc. pwd sr for buildings vol ii for the year 2023-24. i. no. 11.34b p.no. 86, , providing and fixing in position fully panelled shutters of mathi/nandi wood for windows with stiles and rails of 30mm thick, 75mm wide in two halves with panels of 20mm thick including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures) pwd sr for buildings vol ii for the year 12 15 p no. 98, , providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge pwd sr for buildings vol ii for the year 2023-24, 1., , providing 12 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth ren dering, providing and removing scaffolding including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge pwd sr for buildings vol ii for the year 2023-24.1., , ceiling plaster, , meeting hall, , w/c, , toilet, , corridor, , staircase, , providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth 'rendering, providing and removing scaffolding, includ ing cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge. pwd sr for buildings vol ii ? for the year 2023-24. 1. no. 8.7 p.no. 42, , providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster, , with cement mortar 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement, , plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished rough with sponge, , to brick masonry including rounding off corners wherever required smooth rendering,, , providing and removing scaffolding, including cost of materials, labour, curing, , complete as per specifications and as per directions of engineer-in-charge pwd sr for, , buildings vol ii for the year 2023-24. i. no. 8.8 p.no. 42
Tender For supply of paneling work with marine plywood and wooden frame , aluminum composite panel work over the plywood , repair of the broken false ceiling , painting of the auditorium , deep cleaning of auditorium , new covers for chairs and repair of the broken ones , new led panel lights
Tender For corrigendum : supply of complete stores for living shelter 16 men fems - main columns will be made of 100m x 100m x 4mm square section of 3 length , wind breaker columns c1 will be made of 80mmx40x3 point 2 mm rhs 2 x 2 point 70 mtr and 2x2 point 40 mtr , purlin should be made of rhs 80 x 40 x 2 point 9mm of length 2 point 60 mtr and 2 nos purlin of size 80x40x2 point 9mm of length 1 point 5 mtr for wind braker , truss made of rhs main member of 80x40x2 point 9mm , runner of length 2 point 53 mtr and 04 nos gable side runner of length 2 point 40 mtr made of shs 40x40x3 point 2mm , pedestal of height zero point 30 mtr made of shs 150mmx150mmx6mm , wind breaker a cabin of size 1500mm x 1500mm made of 4 nos ms square tube 80mmx40mmx3.2mm and hight 02 nos 2 point 70 and 2 nos 2 point 40 ht with 60mm thick puf panel , double bunks ms of size 1930mm x 930 x 1840 at leg side and 910mm hight with 02 nos mattress with each bunk , ladder shall be provided on kg side in between long rial connecting lower bunk and upper bank , mattress smart ortho mattress ultimate back pain relief of size 1890mm x 800mm , all nuts and bolts used for joining the structural members shall be of high quality and varieties of bolts as per specification , sun shade for door and window openings will be provided with 450mm wide sun shade made out of same material as of roof sheets matching with roof colour as per technical specification documents , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners as per specification , lightning conductor made of copper tube 150cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building provided using 3mm dia gi earth wire connecting to main board to gi earth plate of size 60cm x60cm 6mm thick , lower outer frame rhs 80mm x 40mm 2.9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower gable outer frame rhs 80mm x 40mm x 2 point 9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower cross tie beam rhs 66x33x2 point 9mm has to be fitted with the columns in the u channel fitted at the lower side of the columns , floor panel 6 mm thick vinyl sheet of approved colour over 18mm thick bwp oblique bwr isi ply board shall be shall be provided for floor , pedestals will be made of 150x150x6mm sections of height 300mm with base plate of size 400x400x 12mm , foundation for all pedestals will be of pcc 1 2 4 type b1 20mm graded stone aggregate of size 450x450x900mm over the sub base 100mm thick pcc 1 4 8 using 40mm graded stone aggregate , field heating device , sleeves for field heating device as per specification , peg sets will be provided stainless steel premium fesue dual edge 8 pin cloth hanger bathroom wall door hooks , curtain rods for all openings of doors and windows of shelter will be provided with drapery rods made of 25mm dia , looking mirror of size zero point 5 x 1 point 65mm with wooden frame , iron foot scrapper for size 600mm x 450mm will be provided for entrance doors , iron foot mat for size 1200mmx900mm comprising of internal wire mesh of gauge 18 swg will be provided for entrance doors , all electric items shall be isi marked as per specification , stainless steel shoe rack and shoe stand and multipurpose stand of 31x24 inch , swing open to top dust bin stainless steel 12x28 inch 50l , supply only transitional end table with open shelvees size 24x22x18 inch , stainless steel heavy duty double pole 3 lalyer foldable and moveable prince jumbo cloth drying stand brc 786 ss grey , ordinary portland cement grade 43 and is 12269 to 1990 and packed in 50 kgs hdpe bags , coarse sand , stone aggregate shall be crushed stone 20mm graded conforming to is 383 1970 , stone aggr
Tender For supply of paneling work with marine plywood and wooden frame , aluminum composite panel work over the plywood , repair of the broken false ceiling , painting of the auditorium , deep cleaning of auditorium , new covers for chairs and repair of the broken ones , new led panel lights