Latest wood work Tenders | Government wood work Tenders

Central Government And Public Sector

CTN :42123496

21 Oct, 2025 67.01 Lacs

Najibabad - Uttar Pradesh

Tender For supply of materials and job work under the work of mc ew c of am special repair to conservation and restoration of entrance gateway of portion of old palace najibabad bijnor 2025 26 - items to be executed, u.s. lime, surkhi, coarse sand, lakhori brick, brick aggregate, sal wood, belgiri, gum, gur, demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge., demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 15.2.1 nominal concrete 1:3:6 or richer mix (including equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in charge. 15.7.4 in cement mortar, taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :15.13.1 of area 3 sq. metres and below, dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : 15.14.1 of sectional area 40 square centimetres and above, providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works. ( including errection & dismental after work), disposal of rubbish/malba heap,soil etc. from monument to outside of municipal limit by tractor trolly including excavation loading and unloading etc.requirement proper completion of work at monument /site, provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 0.90m. the pit is divided in to three parts & cement plaster, painting (two or more coats on new work) with oil type wood preservative of approved brand and manufacture, painting(one or more coats) with black japan paint of approved brand and manufacture to give an even shade

State Government

CTN :42133979

10 Oct, 2025 81.0 Thousand

Nilambur - Kerala

Tender For renovation of wood work of dfos residence at aruvakkode nilambur under nailambur south division during 2025-26

State Government

CTN :41942319

11 Oct, 2025 22.53 Lacs

Leh - Jammu And Kashmir

Tender For corrigendum : construction of youth hostel at open stadium leh by way of completion of entry gate and wood work in flooring for open stadium

Central Government/Public Sector

CTN :42122330

23 Oct, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of portable saw machine for wood work

State Government

CTN :42134664

16 Oct, 2025 3.24 Lacs

Delhi - Delhi

Tender For repairing of wooden work at c-101 reids line colony, university of delhi

CTN :42128290

08 Oct, 2025 5.69 Lacs

Multi City - Multi State

Tender For a/r & m/o honorable ministers and mos bungalows under 1b sub division of b division dg 2025-26 (sh preservation of wood work in various bungalow under section ii)

CTN :42119188

06 Oct, 2025 NA

Aligarh - Uttar Pradesh

Tender For tender for wooden work

CTN :42129130

10 Oct, 2025 12.64 Lacs

Nagpur - Maharashtra

Tender For providing melamine polishing to existing wood work in old building g plus 1, new annex building g plus 2, new building g plus 2, and old annex building g plus 2 and barracks at vidhanbhavan, nagpur.(only for society).

CTN :42128994

21 Oct, 2025 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For construction of new showroom for handicrafts and furniture items in wood workshop at ace section, mill division, chatham

CTN :42131867

24 Oct, 2025 NA

Leh Ladakh - Jammu And Kashmir

Tender For supply of dismantling of old worn out false ceiling material with frame structure of xtr hall and other technical area, shifting and disposal of dismantled debris material from outside of office premises , providing, fabrication and fixing of false ceiling in transmitter hall and other technical area at leh, ladakh as per respective drawings , providing and applying of 50mmx50mmx12mm wooden cornice as per approved profile at all around false ceiling in transmitter hall and other technical area at leh, ladakh , dismantling of old worn out wall paneling with frame structure of transmitter hall and other technical area, shifting and disposal of dismantled debris material from outside of office premises , providing, fabrication and fixing of wall paneling treatment in transmitter hall and technical area at leh ladakh as per respective drawings , providing, fabrication and fixing of cedar or teak wooden planks 75 mm x 15 mm in transmitter hall and other technical area at leh ladakh , providing, fabrication and fixing of cedar or teak wooden skirting 125mm x 15mm in transmitter hall and other technical area at leh ladakh , providing, fabrication, fixing and polishing of wooden table for transmitter hall with console table top 25mm thick wooden board or commercial ply with 1mm thick sunmica sheet , providing, fabrication, fixing and polishing of heavy duty wooden workshop table with top made up of 25mm thick wood plank on top and wooden batten frame with wooden beading and moulding , providing and applying of wall finish, putty and pop on walls to make smooth finish for premium emulsion paint at transmitter hall and technical area, after touching on corners etc , providing and applying 2 coats of wall primer and water based luxury emulsion paint on false ceiling and walls surface in xtr hall and technical area, after touching on corners, joints and screw heads , wooden surface to be cleaned and wooden putty to be applied and after rubbing with appropriate sand paper to smooth the surface two or more coat of wooden polish to be applied in wainscot and doors , fixing of 2ftx2ft recessed led light fixtures, as per respective drawings, supply of 1.5 sq.mm single core copper cable with laying and wiring of recessed mounted led light and make ready , fixing of 1ftx1ft recessed led light fixtures, as per respective drawings, supply of 1.5 sq.mm single core copper cable with laying and wiring of recessed mounted led light and make ready dismantling of old worn out false ceiling material with frame structure of transmitter hall & other technical area, shifting & disposal of dismantled debris material from the outside of the office premises., providing, fabrication and fixing of false ceiling in transmitter hall & other technical area at leh (ladakh) as per drawing sg-10150, 10178/4 and respective drawings. description of scope as per measurement taken at site: providing, fabrication and fixing of g.i metal 22 swg channel (size of channel in mm: 15 x 50 x 50 x15) frame structure base channel frame of transmission booth studio, control room, talk studio and other technical area. providing, fabrication and fixing of frame structure with gi metal sheet channel. for hanging arrangement wall to wall 40mm x 40mm x 2mm ms slotted angles with strap hangers shall be provide as per site requirements to support the gi frame structure. these slotted angles shall be further supported 8mm ms tie rods and 10mm ms fasteners from the real ceiling to make the entire structure in level and //bid details 2 / 24

Wood Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

State Government

Central Government/Public Sector

State Government