Get complete information related to latest Wooden Cabin Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Wooden Cabin Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Wooden Cabin Tenders.
Tender For auction sale of depot ferrous scrap - ubl/gsd/0426-0427 /ms/26/c [pl no.98987331] condemned and un- serviceable ms scrap consisting of ms/gi sheets, boilers, tube/pipes, cut channels, alternator covers ,ceiling fan rods, empty solar panels, bend, elbows, flanges, angles, frames, doors, trolleys, boards, nut & bolt, footsteps, fan motor covers, fan guard, sheets/plates, grills, shutters, ms bowls, ms trays, ms rope wires, racks, tie bar, boxes, rods/bars, ms window frames off sizes, fishplates, screw bolt, square chairs, ms grasser tanks, ms chaqured plates lt panel, cubical boxes steel bars in window frames, tie bars, coach light cut up part, iron doors off sorts & sizes. ms electrical boxes, ms rope/chain, channels, rail trolley wheel set, battery boxes, battery containers and ms stand, packing rings, angles off sizes, speed breaker, different types boards, wagon body cut parts, rail dolly, distressing rollers pantograph, coach light cut up parts and other ms/pway scrap ,with/without any attachments. available under the custody of cdms/rs ward/gsd/ubl. note:- bidder has to physically inspect the lot before bidding, cutting permitted by gas/manual during the course of delivery if any nfs, ci, ss and rails found in the lot should be returned to railways.location: road no -04 gsd/ubl bin no- 426-427. remarks-. delivery should start from one end. no pick and choose allowed.
Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc
Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh
Tender For procurement of material and hiring of labour for day to day maintenance of various electrical installations in municipal parks and buildings in ward 87 ranjeet nagar under kbz - supply of 1.5 sq. mm isi marked, frls pvc insulated,single core copper conductor cable as required., supply of 4.0 sq. mm isi marked, fr pvc insulated, single core copper conductor cable as required., supply of 63 amps., 2 pole isolator as required., supply of 6 a, to 32 a, ratings, dp mcb, "c" curve, 10 ka breaking capacity as required., supply of 6a to 32 a ratings, sp mcb, "c" curve, 10 ka breaking capacity, fabrication, supplying and fixing class b galvanised single overhang arm bracket made out of 250 mm long galvanised top tube with cap and 1000 mm long 32 mm dia galvanised pipe with tightening bolts complete as required., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:- 2x 6 sqmm, supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, supply of following size of pvc insulated & pvc sheathed copper conductor 3 core submersible cable conforming to is . 694/210 etc. as rqd. 3 2.5 sqmm with voltage grade 1100 volts., supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (b) single phase 3.0 hp having discharge of 100 lpm approx. at 52 m head, supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (c) three phase 5.0 hp having discharge of 300 lpm approx. at 39 m head., supply, installation, testing and commissioning of cubical type control panel board for single phase & three phase submersible pumping set of following rating complete with contactor, relay , mcb ,condenser ,voltmeter, ammeter and indication lamp etc including connections etc as reqd. (c) 3 hp (three phase), providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. skilled labour", providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. un-skilled labour", supply of led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy 120 135 lm/watt) of following body materials. - 45 watt
Tender For supply of woodencabinet size 70 inch x 75 inch , agro net cloth for office garden , plastic bucket for office , garden water pipe size half inch , washing point pipe size 2 inch , garden water pipe size 1 inch , guldasta for office , stone table with stand size dia 9 ft , stone bench size 3 ft x 2 ft , side table metal rounded size dia 4 ft , round table cloth size dia 4 ft , table cloth size 6 ft x 3 ft , bed sheet with pillow cover for duty room , blanket for duty room , tea thermos 1 ltr , table cloth with unit logo , curtain rod with accessories , laminated flooring sheet , mirror size 36 inch x 72 inch , planter with unit logo , leather pen stand , table cover transparent , blinds for bathroom , table glass size 42 inch x 82 inch , ashok stambh for office , mirror glass size 18 inch x 46 inch , cane stand wooden
Tender For supply of glass wares, polythene wares and miscellaneous items at ssctpp, suratgarh- bottle polythene (pp) wide mouth with cap , burette , burette clamp mild steel chrome pla type with boss head, single pkt (ea , center to (300mmx). , pipette bulbs , pipette stand horizontal (12 pip , retort stand , side hole (225mmx , side hole (300mmx , silicone pipette bulbs , volumetric flask , (ii)beaker polythene capacity 1000 ml,pp autoclaveable , (iii) beaker polythene capacity 250ml,pp autoclaveable , (iii)beaker polythene capacity 500 ml,pp autoclaveable , , , beaker polythene pp auto clavable , blow in low density polythene 125 ml , blow in low density polythene 60 ml , chloroform bladder 500 ml , dropper sterile capacity 3ml , dropping bottle , latex bladder enkay no,5 with clip , measuring cylinder , wash bottle ldpe plastic , , , circular capsules fused silica without lid 48 x 15 (20 ml) , dishes culture petri , crucible fused silica for vm + lid 25x22x38 mm , beaker grifin, low form, with spout, graduated , burette - boroflo, screw thread with ptfe key , funnel plain 60° angle long stem glass 100 mm diameter , funnel separating pear shape with hollow plug stop cock, hollow interchangeable stopper, 500ml , measuring cylinder-single matric scale with pour out , pipette measuring (mohr type) accuracy as per class -a , volumetric flask with stopper , 50 ml burette with 1 ltr. reservoir , automatic zero burette accuracy as per class a with certificate , bod bottles with i/c stopper (300 ml) , bottles reagent amber with i/c stopper , bottles reagent plain narrow mouth with flat head i/c stopper , conical flask , flask boiling round bottom , gas burette with jacket cap. 100 ml (graduated burette 0-5 ml least count 0.1 ml for orset appratus) , orsat gas analyser (for analysis of flue gases) for determination of co2 o2 and estimation of co in flue gases complete with rubber tubing connector. 50 ml burrete and other accessories equipment shall be complete polished woodencabinet equipment should be made of heavy walled borosilicate glass tube and stop cock , spares parts for orsat apparatus , tissue paper roll (double ply) (whatman) filter paper, circular catno. , cellulose nitrate filter 0,45 micron , , acid proof suit , , coal sample tray 12"x 14" big , , spatula (one end spoon and one end flat) 200 mm , , safety goggles (plain) , , direct reading % thermometer for caustic soda lye (45% to 50%) w/w with temperature correction , bottle relative density with capillary bore interchangeable tefflon stopper, 25ml , chlorine gas toner spanner , direct reading % thermometer for hydrochloric acid (27% to 32%) w/w with temperature correction , direct reading % thermometer for sulphuric acid (95% to 99%) w/w with temperature correction , heating element for muffle furnace (1200 degree c , kanthal a-1 resisative wire) , lab apron coat, free size , relay for muffle furnance , spare parts for muffle furnace (make jd refractories) m degree , test sieve for coal analysis, brass frame s.s./wire mesh (make-jayant) , test sieve sets for coal mill fines will be brass, 200mm dia 50mm height, wire cloth from one piece without seam (set shall be consist of three sieve lid & receiver) 50, 100 and 200 astm mesh (make-jayant) , thermal fuse , thermocouple cr/al for muffle furnace , water bath rectangular (double wall), ambient to temp. 95°c, +/-1°c, 220/230v ac, 12 holes 75mm dia (size 425*325*100mm) , water safety jacket(medium size) , temperature controller (pid with sgr power controller) , , working chamber of muffle furnance 6x6x12 inch , , laboratory hand gloves , , laboratory hand gloves (rubber acid and alkali proof) medium size , , laboratory hand gloves nitrile , , polythene sampling bags , , polythene sampling bags (size-1 kg) with zip , , polythene sampling bags (size-500 gm) with zip , , polythene sampling bags (size-250 gm) with zip , , crucible tong , , crucible tong 12" inch , , crucible tong 24" inch , , gooch crucible g4 (size-30 ml) , , vm