Latest wooden cross arm Tenders | Government wooden cross arm Tenders

Central Government/Public Sector

CTN :45475154

30 Jun, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and getting out in an

CTN :45289871

13 Jun, 2026 40.00 Lacs

Awantipora - Jammu And Kashmir

Tender For corrigendum : stage contract for carrying out various electrical maintenance works including sitc, itc of various line materials and distribution substations and dismantling of existing deteriorated out lived electrical infrastructure for the year 2026-27 under th - supply, installation, testing and commissioning of 3-phase 25 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 63 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 100 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 200 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 250 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, sitc of 11 mtr long st poles 410, sp-56 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 9 mtr long st poles 410, sp-33 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 8 mtr long st poles 410, sp-15 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 8 mtr long pcc poles including manual, mechanical carriage, excavation of pole pits with inscription of permenent marking on each pole "name of scheme-2019-20/xx" (xxx mean pole numbers say 01,02...) in white paint in backgound of green paint at conspicious place, providing & fixing of pole earthing as per rec standard as per j-1 (spiral earthing) drawing, supply,fixing of spike earthing rod 20mm 2,5 mtr long with gi strip (25x3)mm, supply and painting of each pole 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint), providing, errection, testing & commissioning of channel cross arms, v-cross arms, sub-station channels & angle iron braces, transformer beltings, including back clamps for fixing cross arms etc fabricated out of galvanized iron of different sizes (rec standard) & to be fixed with gi nuts & bolts and washers., providing, errection, testing & commissioning of channel cross arms, v-cross arms, sub-station channels & angle iron braces, transformer beltings, including back clamps for fixing cross arms etc fabricated out of mild steel of different sizes (rec standard) & to be fixed with gi nuts & bolts and washers., providing & and fixing of 11 kv pin insulators (polymer) with pins ( 5 kn), providing & fixing of 11 kv, g.o ab switch , 3-phase, 200a (09 insulator post type) with arragement for pad locks & operating rod . the operating rod should be g.i pipe (b-class) of 25 mm dia of requisite length., providing & fixing of 11 kv horn, gap fuse 3-phase 100a, providing & fixing of 11kv link set 3-phase, 200 a (station type), sitc of 11kv isolator double break, 3-pole, 630 amps, horizontal mounting type , with earth switch, providing & fixing supply and installation of gapless surge arrestor,9 kv,10 ka, la with (polymer) housing, station type, providing & fixing of lt fuse set of suitable capacity for 63kva,100kva,200kva (as per tender drawing attached), providing & fixing of 11 kv disc insulators (polymer) complete with fitting( 4

CTN :45415617

08 Jun, 2026 40.00 Lacs

Anantnag - Jammu And Kashmir

Tender For rate contract for supply of materials and execution of various maintenance works, as and when required during emergency in electric division anantnag kpdcl for the fy year 2026-27 - supply, erection, testing & commissioning of s.t pole 11mtr. long sp-56 with base plate & cap for ht. strictly as per rec standards, erection, testing & commissioning of s.t pole 11mtr. long sp-56 including its carriage from divisisonal store to site, supply, erection, testing & commissioning of s.t pole 9mtr long sp-33 with base plate & cap for ht. strictly as per rec standards, erection, testing & commissioning of s.t pole 9mtr long sp-33 including its carriage from divisisonal store to site, supply, erection, testing & commissioning of s.t pole 8mtr long sp-15 with base plate & cap for lt. strictly as per rec standards, erection, testing & commissioning of s.t pole 8mtr long sp-15 including its carriage from divisisonal store to site, providing of hydraulic crane on hire basis for loading/unloading of dts of different capacities inclouding fuel and operator faling in the juridection of ed anantnag, erection, testing & commissioning of pcc pole 8mtr long including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 100mmsq (dog) conductor, laying, stringing, tensioning & binding of acsr 100mmsq (dog) conductor including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 50mmsq (rabbit) conductor, laying, stringing, tensioning & binding of acsr 50mmsq (rabbit) conductor including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 30mmsq (weasal) conductor, laying, stringing, tensioning & binding of acsr 30mmsq (weasal) conductor including its carriage from divisisonal store to site, providing & fixing of ismc 100x50x6mm channel iron cross arms for x-mer frame 9long @ 25.2 kg each -1 no including nuts & bolts, fixing of ismc 100x50x6mm channel iron cross arms for x-mer frame 9long @ 18.63 kg each -1 no including nuts & bolts, providing & fixing of ismc 75x40x6mm channel iron cross arms for x-mer frame- 1 nos @18.63 kg each 9 long including nuts & bolts, fixing of ismc 75x40x6mm channel iron cross arms for x-mer frame-, providing ,fixing, of ismc 75x40x6mm x-arm 5 long, fixing, of ismc 75x40x6mm x-arm 5 long-, providing ,fixing, of ms angle iron braces 50x50x6mm-4.5 ft long,, fixing, of ms angle iron braces 50x50x6mm-4.5 ft long, providing and fixing of sprial earthing made of 115 turns of gi wire swg no.8 placed 1.5m below ground level including excavation of pit, refilling the same withsoft soil, fixing of sprial earthing made of 115 turns of gi wire swg no.8 placed 1.5m below ground level including excavation of pit, refilling the same withsoft soil, supply,fixing, testing & commissioning of 11kv link set (polymer) station type as per is standards, fixing, testing & commissioning of 11kv link set station type (polymer/porcelain )as per is standards, supply,fixing, testing & commissioning of 11kv link set heavy duty as per is standards, fixing, testing & commissioning of 11kv link set heavy duty (polymer/porcelain ) as per is standards, supply,fixing, testing & commissioning of 11kv do fuse set (polymer )as per is standards, fixing, testing & commissioning of 11kv do fuse set (polymer/porcelain ) as per is standards, supply,fixing, testing & commissioning of 11kv la set (polymer )as per is standards, fixing, testing & commissioning of 11kv la set (polymer/porcelain ) as per is standards, providing and fixing of lt fuse set as approved by kpdcl., supply,fixing, testing & commissioning of 11kv disc set (polymer) 45 kn complete set, supply,fixing, testing & commissioning of 11kv disc set (porcelain) 45 kn complete set, fixing, testing & commissioning of 11kv disc set (polymer/po

Central Government/Public Sector

CTN :45384656

13 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, copper wound 11

corporations/Associations/Others

CTN :45360815

15 Jun, 2026 15.95 Lacs

Robertsganj - Uttar Pradesh

Tender For electrical work-work for the replacement of old and dilapidated cross-arms and pin insulators on 11 kv lines under the electricity distribution division, pipri, as part of the business plan for the year 2026-27. (semi-turnkey)

CTN :45019992

06 Jun, 2026 NA

Baramulla - Jammu And Kashmir

Tender For corrigendum : annual stage contract for supply, carriage upto divisional store, unloading etc. of store items required by electric division sopore under m and r for the f.y 2026-27 - supply of steel tubular poles of sizes, st pole 11 mtr. long (st-410 sp56), st pole 9 mtr. long (st-410 sp33), st pole 8 mtr. long (st-410 sp15), supply of pcc poles of sizes, pcc pole 9 mtr. long (wl =300 kg), pcc pole 8 mtr. long (wl =250 kg), supply of acsr conductor of sizes, 0.03 acsr conductor (weasel), 0.05 acsr conductor (rabbit), 0.1 acsr conductor (dog), supply of sub-station items, supply of 11 kv link set (post type) of rated capacity 200 amp (polymer type) , supply of 11 kv link set (post type) of rated capacity 200 amp (porcelain type) , supply of 11 kv link set (line type) heavy duty having rated capacity 600 amp (polymer type) , supply of 11 kv link set (line type) heavy duty having rated capacity 600 amp (porcelain type) , supply of 11 kv gang operating, ab switch 3-phase, 3-pole, 200 amp, vertical type comprising of 9 no. insulators, pipes and lock pad etc complete job (polymer type), supply of 11 kv gang operating, ab switch 3-phase, 3-pole, 200 amp, vertical type comprising of 9 no. insulators, pipes and lock pad etc complete job (porcelain type), supply of gapless surge arrestor, 9 kv, 10 ka, lighting arrestor with polymer housing, stn. type (rashtriya, spark or yamuna make), supply of gapless surge arrestor, 9 kv, 10 ka, lighting arresor with porcelain type housing, stn. type (rashtriya, spark or yamuna make), supply of 11 kv horn gap fuse set 3-phase 200 amp (polymer type), supply of 11 kv horn gap fuse set 3-phase 200 amp (porcelain type), supply of g.i.wire no. 8 swg, supply of guy insulators (11 kv), supply of bobin insulators 40 mm, supply of pole collars of 50x8mm galvanized flat iron with galvanized nuts and bolts of sizes, supply of gi barbed wire for anticlimbing, supply of anticlimbing devices, supply of 11 kv danger plate with clamp, supply of galvanized nuts and bolts of sorts, supply of galvanized channel iron cross arm (100x50x6mm), (75x40x6mm) duly fabricated including clamps and galvanized nuts and bolts of sizes with washers of sizes, supply of galvanized angle iron brace (50x50x6mm) of sizes duly fabricated including clamps of different sizes and galvanized nuts and bolts of sizes with washers of sizes, supply of galvanized v cross-arms duly fabricated of size 75x40x6mm channel iron cross arms including clamps of different sizes and galvanized nuts and bolts of sizes with washers of sizes, supply of m.s. channel iron cross arm (100x50x6mm), (75x40x6mm) duly fabricated including clamps and nuts and bolts of sizes with washers of sizes duly painted with redoxide and and aluminum paint, supply of m.s. angle iron brace (50x50x6mm) of sizes duly fabricated including clamps of different sizes and nuts and bolts of sizes with washers of sizes duly painted with redoxide and and aluminum paint, supply of m.s. v cross-arms duly fabricated of size 75x40x6mm channel iron cross arms including clamps of different sizes and nuts and bolts of sizes with washers of sizes duly painted with redoxide and and aluminum paint, supply of f-top fabricated of galvanized channel iron cross arm (75x40x6mm) 1.5 long and of 6 horizontal length including clamps, collars, nuts and bolts complete with washers etc., supply of protection items (dp mcb c-curve series of breaking capacity 15 ka) (schnieder/siemens/legrand make), 6 amp, 10 amp, 16 amp, 25 amp, 32 amp, 40 amp, 63 amp, supply of protection items (tp mcb c-curve series of breaking capacity 15 ka) (schnieder/siemens/legrand make), 16 amp, 25 amp, 32 amp, 40 amp, 63 amp, supply of protection items (tp mccb wih enclosure complete duly fiited over galvanized angle iron stand/frame duly grouted) (schnieder/siemens/legrand/l&t - d sine series make), 32 amp (breaking capacity 25 ka), 40 amp (breaking capacity 25 ka), 63 amp (breaking capacity 25 ka), 100 amp (breaking capacity 25 ka),

CTN :45352757

08 Jun, 2026 11.41 Lacs

Sikar - Rajasthan

Tender For street light accessories and phase wire work in losal area - work, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a"attached with this bsr ., 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discoms specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, suspension clamp with eye hook & pole clamp, dead end clamp with eye hook & pole clamp, p & fixing powder coated crca sheet enclosures on existing angle iron frame by means of nuts and bolts and making holes , din rail etc. as required.for additional technical parameters of product / work refer annexure a attached with this bsr, 2.0 mm thick, providing & fixing of ac operated heavy duty 230 /440 volt power contactor as per pwd specification for electrical works, isi marked is/iec 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, din rail mounting type including making connections, testing etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 4 pole power contactors with following ac 1 rating 63 amp, providing & fixing of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and ac1 rating of 16-20 amperes including making connection, programming conforming to iec 60730-1 and 60730-2-7 etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., one day & week reserve (analog type ), sitc of 3 /4 pole current limiting moulded case circuit breaker (mccb) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 v, 50 hz; o/l & s/c settings , conforming to is/iec 60947 p -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, breaking capacity ics = 100% icu. u imp =8 kv, rated insulation voltage 690 v. provision for uvr , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.oem shall have submit nabl / cpri / erda accrediated lab type test certificate before execution all as per pre approved by engineer in-charge. for additional technical parameters of product/ work refer annexure a attached with this bsr, 4 pole mccb with thermal magnetic release up to 100 amp , 10 ka, fixed o/l & fixed s/c setting, pipe earthing as per is:3043- 1987 with 3.0 mtr. long, 40 mm dia. b class g.i. pipe is: 1239 (part-1) 2004, equivalent to bs : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and heavy duty weather proof poly-propylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225 to 260 mm, bottom dia 300 to 350mm. and height 250 to 300 mm. and embodying the pipe compl

CTN :45356618

08 Jun, 2026 NA

Lohit - Arunachal Pradesh

Tender For supply of silencer complete , side mirror view , oil filter , ac cut off sencer , clutch plate , door regulator mech rh , clutch master cyl , hose radiator outlet , fuel filter , element oil filter , air filter , brake pad , wheel cyl assy , wiper arms , fuel pump assy , cross kit

State Government

CTN :45324334

03 Jun, 2026 NA

Alappuzha - Kerala

Tender For reconditioning of eht line towers for enhancing the life span of towers by replacing the deteriorated and corroded cross arms & peak of towers at loc.86, 87, 90,130, 131,134 & 135 of 6pung & 6pukv at ambalappuzha & karoor area including replacement of damaged nuts and bolts under lms,alappuzh

State Government

CTN :45315845

16 Jun, 2026 11.15 Lacs

Araku - Andhra Pradesh

Tender For painting of severely rusted ms towers for the 15nos locs of lines sub-division, araku i.e., 6nos locs. (226, 227, 235, 236, 269 & 270) of 132kv t.b. vara - araku dc line, 2nos. locations (315a & 315b) of 132kv t.b. vara - kothavalasa/gold star dc/sc line, 2nos. locations (40&41 additional cross arm sections only) and 5nos. locations (41/1(3nos. cross arms only), 41/6, 41/12, 41/14, 41/18 bottom +3 extension sections only) of 132kv araku - similiguda - tyda traction dc line with one coat of red oxide as primary and one coat of 1st grade aluminum paint as secondary and black paint to the leg portions

Wooden Cross Arm Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government