Get complete information related to latest Wooden Blocks Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Wooden Blocks Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Wooden Blocks Tenders.
Tender For manufacture & supply of trestle for lhb coaches as per drawing no-wr/ml-352/c manufactured by mscclass heavy duty erw pipe confirms to is: 1239-04 part 1,2-32 mm thick ms plate proposed for top plate confirms to is 2062-11,3-for rib and base plate ms plate 10mm thick proposed and confirms to is 2062-11,4 solid wooden block size 390*390mm (drawing attached).painted structure of trestle body and two additional (1with trestle & 2 extra total 3 woodenblocks tobe provided with each trestle). [ warranty period: 30 months after the date of delivery ]
Tender For supply of ferritic steel sheet 3x1250x2100mm., as per drawing: rdso spec. no. c-k201, grade x2crni12 (409m) table 1&2, heat treatment condition 2b as per table-5., packing instruction: stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic steel) coils. the coil shall be protected in reasonably good condition to withstand normal handling hazard during transit with the following provision as the barest minimum: i) coil should be wrapped with a layer of water proof paper through out whole length. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet. iv) side of the coil should be covered with card board sheet. v) after this whole coil should be wrapped with biodegradeable plastic sheet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring followed by another iron ring. vii) outer edge of the coil should be wrapped with gi ring. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil should be mounted on woodenblocks for easy lifting/stacking. x) the sheets in coil form for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheets/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate shall be seprated with a layer of water proof paper, after this the whole bundle should be wrapped with double layer of water proof paper and a biodegradeable plastic sheet of suitable thickness. a metal protection in edges should also be provided. ii) all bundles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit ifany shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]
Tender For supply of trestle - manufacture and supply of trestle for lhb coaches as per drawing no wr/ml-352/c. manufactured by msc class heavy dut y erw pipe confirms to is:1239-04 part 1. (1) top plate having dimension 480x480x35mm thick ms plate confirms to is 2062-11-e250a. (2) bas e plate having dimension 100x100x10 mm confirms to is 2062- 11-e250a (3) rib 10mm thick proposed and confirms to is 2062-11-e250a (4) so lid wooden block of teak wood- size 390x390x130 mm (drawing attached). 1 number supply includes 01 number painted structure of trestle body and total 3 woodenblocks(1 with trestle & 2 extra).
Tender For supply of item as per attached technical details d d - item 1 , item 2 , item 3 , item 4 , item 5 , item 6 , item 7 , item 8 , item 9 , item 10 , item 11 , item 12 , item 13 , item 14 , item 15 revolving chair of adjustable height with wheels, 5-wheels metal base stand, tilting mechanism- centre tilt (single pivot point at seat center for simple reclining motion), mechanism to adjust seat height- hydraulic/pneumatic mechanism, with high backrest, armrest available with padding, lumbar support available, seat & backrest having breathable padded seat made of thick & resilient high- quality sponge, preventing body heat and keeping your hip and legs sweat-free, minimum chair seat height-400mm, minimum height adjustment range of seat-150mm, seat upholstery material- high quality mesh fabric/polyester fabric/leather. accepted make- godrej, neelkamal, methodex or any other reputed brand. (firm shall get sample/design approved from consignee before supply)., wooden executive table wt -716 + eru (size in mm, 1800w x 900d x 735h) (eru size in mm, 900w x 450 d x 670 h). three drawers on one side & one drawer as well as one cupboard on the other, material used: semi-waterproof plywood -18mm thickness & sunmica-thickness 1mm. (firm shall get sample/design approved from consignee before supply)., supply & installation of office workstation l- type modular partition, capacity: 04-seater sharing, overall size:- 3100mm x3100mmx1200mm. partitions details:-aluminium partitions dimensions: 1500mm x 1200mm, with thickness: 60mm, featuring elegant glass screens that balance privacy with openness, reducing distractions while maintaining a collaborative atmosphere. individual work area:- 1500mm x 1500mm personal workspace with 03-drawer pedestal & keyboard, with individual table-top dimensions of width: 600mm & table top thickness: 25mm or more. material ) /bid number : gem/2026/b/7418119 * /dated: 06-04-2026 & & / bid document 1 / 19
Tender For set of woodenblocks for battery packing in battery box of wap4/wag7/wag5 electric locos as per drg no. sr.dee/rs/ed/misc-389. one set contains 26 nos. one sample should be got approved beforeeffecting bulk supply. [ warranty period: 30 months after the date of delivery ]
Tender For auction sale of others - miscellaneous coach released material mixed condition i.e industrial waste consisting of- (1) decolite released from floors of coaches. (2) pieces of porcelain wash basin, commode etc., broken pieces of plain and colour glass released from coaches with or without non ferrous/ferrous attachment, if any. (3) old l p sheet (decolum) of irregular sizes including pop rivet, seat/berth no. plates, pieces of limpet sheet, off-cuts of broken unserviceable lp sheet, unusable timber/plywood/wood scrap, broken pieces of compreg, plywood, broken slates, pieces of berth/shutter panel etc. released from coaches. (4) unserviceable/perished rubber items like-window sealing rubber, gas rubber hose pipes, shutter felts, rubber released from coaches, unserviceable pieces of foam, rexene and recron. (5) floor sweeping consisting of sand, mud, saw dust, scrap paper, coach rust ashes, rusty nails, nut-bolts, washers, small pieces of rusted mouldings, and pieces of ss moulding aluminium rivets etc, which cannot be segregated with reasonable effort, will be allowed in small quantity. (6) released unserviceable plastic spool containing end pieces of filler wire, wire rope, pieces of thermocol, unserviceable electrical switches with pieces of electrical cable, minor attachments, if any which cannot be segregated with reasonable efforts, plastic bend pipes and released air filter of rmpu. (7) released packing material (rubber and wooden) polythene bags, unusable gunny bags, card board, paper, puttah, gatta, old/teared hand gloves, aprons, etc. (8) broken welding hand screen, helmet, face shield, broken pieces of battery container, bakelite, plastic/pvc sheet. broken pieces of battery flutes, flexible pipes. lot no. crws/bpl/mech/coach furn/25-26/06 date: 16-02-2026 note: (1) ferrous and non ferrous metallic items except minor attachments with the material of lot will not be delivered. (2) all materials should be lifted with road level in sweeping condition. (3) delivery will be made on actual measurement. (4) ferrous & non-ferrous items will be returned by purchaser to stockholder during delivery, if any found in the lot. (5) hazard waste item i.e. paint peeling, paint-dust will not be delivered. (6) if any another material found except description of material will be not delivered and returned to stock holder. (7) sorting/segregation of material is not allowed.
Tender For manufacture & supply of trestle for lhb coaches as per drawing no-wr/ml-352/c manufactured by mscclass heavy duty erw pipe confirms to is: 1239-04 part 1,2-32 mm thick ms plate proposed for top plate confirms to is 2062-11,3-for rib and base plate ms plate 10mm thick proposed and confirms to is 2062-11,4 solid wooden block size 390*390mm (drawing attached).painted structure of trestle body and two additional (1with trestle & 2 extra total 3 woodenblocks tobe provided with each trestle). [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of compreg plywood slat size 8x50x556 mm conforming to rdso spec. no.c-9407 (rev.4)type-i. drg no : sdc-6-1-013, item no.8 . alt : a/7 (attached in documents) [ warranty period: 84 months after the date of delivery ]
Tender For a) ctr(p) - 0.852 tkm & trr(p) - 1.260 tkm for replacement of 52 kg d-mark rails [irpsm id : 01.02.31.23.1.10.034] b)detailed estimate for taloje panchanand provision of cross-over for movement of trains from up loop line to dn direction (pnvl side) - ttr(fs+tws+wcmsc) - 2 sets (1:12) irpsm id: 01.02.16.24.3.51.006 c) repairs of curve, lwr, sej boards, speed indicator boards, all level crossing boards, fixing of woodenblocks on platform and lc, pre-casted fauling mark, attention of track, collection and disposal of scrap, etc in pnvl-jnpt section.
Tender For supply of hardware carpentry material requirement c c - hardware_carpentory item chap konda security door guards , auto hinges small cupboard , 3 hinges for small cupboard shutter , 4 hinges plywood doors , drawer handle 5 , main door handle 6 , ambroasian tape , door latch tadi patti 10 , aldrop for door 10 , tower bolt 6 , door nut bolt bugdi , mosquito net , batten patti 1 , 32mm flush door 36 x 81 , welding rod , plywood 12 mm 4 x 8 , plywood 18 mm 4 x 8 , plywood 6 mm 4 x 8 , plywood 8 mm 4 x 8 , sunmica 1mm thk , fevicol container , araldite tube 180 gram , hexa blade , curtain socket , curtain rod , cloth hanger 6 hooks , door stopper , nails 14 no x 1.5 , nails 14 x 2 , nails 17 no x 1.25 , nails 19 no x 0.333 , nails 14 no x 1 , screw 50 x10 , screw 60 x 10 , screw 35 x 10 full thread , screw 35 x 10 half thread , full thread screw 35 x 8 , full thread screw 25 x 8 , full thread screw 19 x 10 , bathroom door bolt 3 , main door 32 x 81 , batten patti 0.20 x 0.5 , door magnet for cupboard , door closer , steel cutting blade , wooden cutting blade , drawer lock , steel welding rod , steel welding spray , concrete nail 3 , concrete nail 2 , concrete nail 1.5 , concrete nail 6 , binding wire