Get complete information related to latest Wooden Box Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Wooden Box Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Wooden Box Tenders.
Tender For supply of wearing plate for side bearer, as per drawing: cc05118 alt b, packing instruction: brown papper wrapping for individual item collectively packed in woodenboxes, quality plan: qmq0861 [ warranty period: 30 months after the date of delivery ]
Tender For supply of harness of underframe and roof arrangement for lhb eog non ac lgs coaches with centralised fdb in doorway area., as per drawing: edts451, rev- nil, packing instruction: cable harness: complete one coach set cable harness to be protected with biodegradable transparent polythene sheet and packed in a woodenbox. soft eco-friendly packing material hay,straw, etc be provided inside the woodenbox to protect any damage to cable insulation while packing/unpacking.bottom frame to be made of wooden planks 20mm thick & should have support of atleast 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. rigid pvc conduit supplied loose along with harness should be packed as per instructions .the material used for product packaging shall be eco-friendly.a list should be pasted on each packing showing order no ,pl no, description of the item, drg.no/spec.no, qty , firm's name &address and date of despatch etc. [ warranty period: 30 months after the date of delivery ]
Tender For supply of harness of lhb eog non -ac lscn coaches with fdb on cabin side area only, as per drawing: edts452, packing instruction: cable harness: complete one coach set cable harness to be protected with biodegradable transparent polythene sheet and packed ina woodenbox. soft eco-friendly packing material hay,straw, etc be provided inside the woodenbox to protect any damage to cable insulation while packing/unpacking.bottom frame to be made of wooden planks 20mm thick & should have support of atleast 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. rigid pvc conduit supplied loose along with harness should be packed as perinstructions .the material used for product packaging shall be eco-friendly.a list should be pasted on each packing showing order no ,pl no, description of the item, drg.no/spec.no, qty , firm's name &address and date of despatch etc. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of harness of underframe and roof arrangement for lhb eog non ac lgs coaches with centralised fdb in doorway area., as per drawing: edts451, rev- nil, packing instruction: cable harness: complete one coach set cable harness to be protected with biodegradable transparent polythene sheet and packed in a woodenbox. soft eco-friendly packing material hay,straw, etc be provided inside the woodenbox to protect any damage to cable insulation while packing/unpacking.bottom frame to be made of wooden planks 20mm thick & should have support of atleast 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. rigid pvc conduit supplied loose along with harness should be packed as per instructions .the material used for product packaging shall be eco-friendly.a list should be pasted on each packing showing order no ,pl no, description of the item, drg.no/spec.no, qty , firm's name &address and date of despatch etc. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of harness of lhb eog non -ac lscn coaches with fdb on cabin side area only, as per drawing: edts452, packing instruction: cable harness: complete one coach set cable harness to be protected with biodegradable transparent polythene sheet and packed ina woodenbox. soft eco-friendly packing material hay,straw, etc be provided inside the woodenbox to protect any damage to cable insulation while packing/unpacking.bottom frame to be made of wooden planks 20mm thick & should have support of atleast 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. rigid pvc conduit supplied loose along with harness should be packed as perinstructions .the material used for product packaging shall be eco-friendly.a list should be pasted on each packing showing order no ,pl no, description of the item, drg.no/spec.no, qty , firm's name &address and date of despatch etc. [ warranty period: 30 months after the date of delivery ]
Tender For bid to ras corrigendum : supply of frls copper cable 2.5 sqmm single core with multistranded conductor 1100 volts grade in green colour , pvc conduit pipe of 25mm dia 10 feet long. , pvc tee for conduit pipe of size 25mm dia , pvc elbow for conduit pipe of size 25mm dia , pvc clamp suitable for 25mm dia conduit pipe , rawl plug 1.5 inch 25 nos pkt , screw 1 inch 25 nos pkt , decorative wall light fitting 10 watt made up of polycarbonate suitable for 10 w retrofit led bulb , switch piano type 5 amps , switch socket combination multipurpose 3 pin 5 amps and 3 pin 15 amps with gang box , surface plastic box suitable for modular switches and socket of 3 module. , solid plate with base frame suitbale for surface plastic box of 3 module , ceiling rose pvc 2 to 3 terminal , tape insulation 10 mtr , lightning conductor with chemical earthing comprising as per tech specs , electric earthing set complete with items as per tech specs , supply and installation of solar inverter and battery combo 1100 va , heavy duty exhaust fan ms body 300mm sweep with louver shutter , pcc solid block 400x200x200mm minimum strength 50kg per sqcm , 100mm thick interlocking tiles machine pressed precast concrete paver block , cement opc in 50 kg packed in laminated and water proof bag type a and type b , fine sand best quality , stone aggregate graded 20mm , stone aggregate graded 40mm , transparent pipe 5mm dia bore for water leveling , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle , fish line best quality , plumb bob iron best quality , galvanised iron pan mortar 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle min wt 5 kg without handle , picks axes with chiesel and point ends , showel square nose 14 gauge tata high carbon steel , painting brush 100 mm , synthetic tarpaulin 550 gsm of size 30ft x 30ft , multipurpose non-slip rubber reusable gloves for scrubbing, cleaning, brick work etc , brick trowel steel 305 mm , heavy duty openable props scaffolding made of ms pipe of 60 and 48mm dia , ms centering plates of size 90cm x 60cm of thickness 14 guage , portable ms body needle vibrator machine with power 3 hp to 5 hp
Tender For bid to ras corrigendum : supply of force preservation bkr e e - factory made precast box cells, industry made precast concrete elements, b of of 2m x 2m x 1m, height 2.8 m from bottom to top of arch internal, 200 mm wall thickness , cost cells sq without arch, 6 toilet of 2x2x1.50m precast factory vertically casted with dry cast tech, hydraulically pressed all side vibrated for max str m 40 gde , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 to 1989 make birla gold or ambuja or ultratech or acc or jk or dalmiya , course sand free from vegetation , stone aggregate , water proofing compound 20 ltr confirming to is 2645 2003 of make pidilite, dr.fixit, fevicol , quick setting compound 20 ltr of make pidilite, dr. fixit, fevicol , rolling and stone machinary cost at pcc level, including compaction and leveling cost , geo textile of 200 gsm to be used above pcc to prevent passage of water above pcc , srf membrane cost 500 per 700 sheet , quick and water proofing setting compound for cold tempreture , hdpe and perforated pipes for water proof slipage water , precast stair case , side walls bricks casted per precast , damproof and water proofing chemical applied all over three sides exterior and four sides interior , light solar one , furniture cost benches cost of 4 feet each, three line seating arrangements , srt 2mm thick 2.50ft width and 8ft length , ismb 100mm x 100mm x 6mm thickness of 18 ft length. , door of 3.50ft x 6 ft as per opening of entry exist position required. , wall putty , paint work internal and external , wiring and casing pipes , wires , sanitary ware and wash basin and pipes for toilet one nos , sanitarty pipe and septic tank, water sunk storage provisions , fire fighting , ventilation cost air ventilation system ) /bid number : gem/2026/b/7455697 * /dated: 19-04-2026 & & / bid document 1 / 30
Tender For supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of
Tender For supply of harness for hog compliant lhb eog high capacity parcel van coaches., as per drawing: edts406,rev-nil,am-2,corr-1&2, packing instruction: cable harness: complete one coach set cable harness to be protected with biodegradable transparent polythene sheet and packed in a woodenbox. soft eco-friendly packing material hay,straw, etc be provided inside the woodenbox to protect any damage to cable insulation while packing/unpacking.bottom frame to be made of wooden planks 20mm thick & should have supportof atleast 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. rigid pvc conduit supplied loose along with harness should be packed asper instructions .the material used for product packaging shall be eco-friendly.a list should be pasted on each packing showing order no ,pl no, description of the item, drg.no/spec.no, qty , firm's name &address and date of despatch etc. [ warranty period: 30 months after the date of delivery ]
Tender For supply of traction transformer for hs-spic with required number of secondary traction windings along with protection equipment, safety chain arrangement and ht cablewith protection shield including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and accessories including auxiliary machines such as oil pump, oil cooling blowers as per clause 4.3 of rdso specification no. rdso/pe/spec/emu/0196-2019 (rev.0) along with mounting hardware (one set per hs-spic)., as per drawing: as per clause 4.3 of rdso specification no. rdso/pe/spec/emu/0196-2019 (rev.0), packing instruction: suitably covered with biodegradable transparent polythene and packed in woodenbox.the material used for product packaging shall be eco-friendly .each packing shall be stenciled/labeled handle with care, consignee name, order no,pl's no , description ofitem, batch no, drg/spec no, qty,firm's name, &date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a)nameof the manufacturer b)purchaseorder number c)purchaseorder date d)uniqueserial number (or lot number for bulk items) of the manufacturer or e)dateofmanufacture f)deliverychallan no. g)deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 36 months after the date of delivery ]