Latest wooden bridge repair Tenders | Government wooden bridge repair Tenders

Central Government/Public Sector

CTN :45067062

29 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For request for proposal (rfp) for appointment of authority engineer for providing project management services for design and construction of new rail cum road bridge no.11 over river ganga, 50 meters downstream of the existing old malviya bridge near kashi railway station, including sub structure and super structure of the bridge (8 x 108.5 m + 2 x 103.3 m open web steel girder) for four line tracks on lower deck and six lane road on upper deck, including railway and road approaches as per gad along with associated ohe works and general electric works in lucknow division of northern railway at varanasi, uttar pradesh, india

Central Government/Public Sector

CTN :44950088

29 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : request for proposal (rfp) for appointment of authority engineer for providing project management services for design and construction of new rail cum road bridge no.11 over river ganga, 50 meters downstream of the existing old malviya bridge near kashi railway station, including sub structure and super structure of the bridge (8 x 108.5 m + 2 x 103.3 m open web steel girder) for four line tracks on lower deck and six lane road on upper deck, including railway and road approaches as per gad along with associated ohe works and general electric works in lucknow division of northern railway at varanasi, uttar pradesh, india

corporations/Associations/Others

CTN :45062974

22 May, 2026 36.79 Crore

Kasganj - Uttar Pradesh

Tender For engineering, procurment and construction (epc) of 02 lane rail over bridge on railway crossing no. 248a/special at km 244/3-244/4 of kasganj-farrukhabad rail section on kasganj to amapur, sidhpura road in district- kasganj, u.p.

CTN :45057581

16 May, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of

corporations/Associations/Others

CTN :45045205

14 May, 2026 1.63 Crore

Raigad - Maharashtra

Tender For supply of tent , chair , table , torch , dragon torch , rain suit , patrolman stick , punji , pick axe beater , walkie talkie , clip applicator , rail disc cutter , rail disc cutter wheel stone , rail drilling machine , rail drilling tool , chamfering kit , at welding trimmer , rail heating blower for at weld , thermit welding tool set , rail profile weld grinder , rail grinding stone , straight edge , track jack , track jack mechanical , rail dolly , rail tong , prc sleepers chain , joggled fish plate , fish plate 1 mtr long , c clamp , anti sabotage device , anti sabotage device key , fish bolt spanner , hammer 5kg , hammer 3kg , digital toe load measuring device , rail tensioner , hydraulic sleeper spacer , mono rail wheel barrow , portable dc welding generator , rail wear gauge , continuous rail thermometer , laser distance meter , electric jumper wire , jim crow , rail thermometer , pwi inspection kit , versine measuring kit , track gauge cum level , destressing roller , off track tamper , off track tamper trolley , tamping tools , acd male , acd female , electric arc welding machine , banner flag , hs flag red , hs flag green , safety jacket , safety helmet , safety shoe , tricolor torch , number plate , staff for patrol man , key man bag , breathe analyzer , keying hammer , pway inspection trolley , material trolley , dip lorrey , measuring tape 30mtr , measuring tape 15mtr , measuring tape 5mtr , steel sections cutting equipment , plate screw tubular spanner , wire basket , adjustable spanner , whistle , powrah spade , rake ballast , pan mortar , wooden blocks , chain saw , bush cutter , tarpaulin , grease , grease gun , caution indicator boards , speed indicator boards , termination boards , column posting for boards , generator , remote controlled gang hooter , safety goggles , ambient temprature thermometer , small testing hammer , inspection cum chipping hammer , elcometer , pocket steel tape , straight edge 1m , measuring tape 30m , log line with 20 kg mettalic clinder , probing rod , inside calliper outside calliper , feeler gauge , mirror 10x15 cm , bridge inspection torch light , magnifying glass 100 mm , piano wire with clamps , plumb bob , steel scraper , binoculars , current meter , echo sounder , schmidts hammer , dye penetration kit , magnetic crack detector , welding gauge , safety belt , duro meter , auto level , hydraulic torque wrench , hexagonal crowbar , tommy bar , fire buckets with stand , emergency medical hand stretcher , first aid box - first aid box , tool box , hammer 500gm , gum boots //bid details 2 / 96

CTN :45042578

11 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of others - cond. different types of m&p items consisting of 1] sc. power pack, petrol driven engine [hrd], make- lukas, qty-1 no, 2] sc. control desk, make- lukas, qty-1 no, 3] sc. re railing bridge 1.1 mtr height 184 mm, make- lukas, qty-1 no, 4] sc. telescopic jack hp 65/t 400r, make- lukas, qty-4 nos, 5] sc. telescopic jack hp 25/t 450r, make- lukas, qty-4 nos, 6] sc. claw jack hp 50/p 850r, make- lukas, qty-3 nos, 7] sc. holding wire rope, make- na, qty-5 nos, 8] sc. inflatable tower light m/c 3.5 hp, make- aska, qty-2 nos, 9] sc. power pack 8.3 hp, diesel driven [hre], make- greaves ltd., qty-2 nos, 10] sc. portable generator set petrol/kerosene driven ,1.5 kva , make- greaves ltd., qty-6 nos, 11] sc. re-railing bridge 2.2 mtr, make- lukas, qty-1 no, 12] sc. re-railing ramp [ci] , make- na, qty-2 nos, 13] sc. pulling device,cap-220 kn, make- lukas, qty-1 no, 14] sc. jack 65/t small, make- lukas, qty-1 no, 15] sc. jack lukas 100 kn single act dia 60 mm, make- lukas, qty-1 no, 16] sc. jack 25/t 185 r [small], make- lukas, qty-2 nos, 17] sc. jack 65/t [big], make- lukas, qty-2 nos, 18] sc. rail grip for axle pusher, make- lukas, qty-1 no, 19] sc. hydraulic jack [manual] 10/t-2 nos & 30/t-1 no, make- na, qty-3 nos, 20] sc. hose pipe rubber, make- na, qty-11 pairs, 21] sc. cutter lukas [hrd], make- lukas, qty-1 no, 22] sc. spreader with spare nose, make- lukas, qty-1 no, 23] sc. combo cutter lukas, make- lukas, qty-1 no, 24] sc. base of jack 25/t , make- lukas, qty-1 no, 25] sc. base of claw jack, make- lukas, qty-2 nos, 26] sc. line closure for pulling device , make- lukas, qty-2 nos, 27] sc. axle pusher head , make- lukas, qty-4 nos, 28] sc. claw jack head , make- lukas, qty-4 nos, 29] sc. height piece for [radious plate] telescopic jack [ai] , make- lukas, qty-2 set, 30] sc. claw jack rope head , make- lukas, qty-4 nos, 31] sc. bridge stopper[triangular shape] , make- lukas, qty-3 nos, 32] sc. roller carriage , make- lukas, qty-3 nos, 33] sc. roller carriage top plate , make- lukas, qty-2 nos and 34] sc. portable diesel generator set , make- greaves ltd., qty-1 no. condition- 1. lot will be delivered as per qty mentioned in description column, 2. materials like nearby other machine and ferrous , nonferrous , ss items etc near/surrounding the offered items is not allowed for lifting or taking delivery and the same is required to be handed over to the custodian if so found, 2. picking and choosing of materials near the offered items is not allowed.3. purchaser has to make his own arrangement for lifting and taking delivery of the lot.4. custodian may allow purchaser to bring crane if it is required and justified.5. the lot will be sold on "as is where is basis", 5. cutting/dismantling of sold lot is allowed.

corporations/Associations/Others

CTN :45044091

21 May, 2026 52.22 Crore

Farrukhabad - Uttar Pradesh

Tender For engineering procurement and construction (epc) of 02 lane rail over bridge at lc no. 154spl on kanpur-kasganj rail section and at lc no. 9 spl on the neem karori rail section of north eastern railway on fatehgarh- farrukhabad road in dist farrukhabad

Central Government/Public Sector

CTN :45049943

12 May, 2026 NA

Gadarwara - Madhya Pradesh

Tender For supply of weigh rail with sensors for electronic in motion railway weigh bridge as per rdso specification wd-29-misc-19 (rev.1) of 5.5 meter length of capacity 60 kg/m rail section including cost of freight loading & unloading , commissioning and stamping by weight and measurement department for eimwb installed at gadarwara station. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45034344

09 May, 2026 NA

Bangalore - Karnataka

Tender For supply of fuse tb type-1 1in-1 out cbl upto 2.5 , fttb type-1 1in-1 out cbl upto 2.5 sqmm , fttb type-1 1in-1 out cbl upto 2.5 mm , fttb type-1 1in-2 out cbl upto 2.5 m , fttb type-2 1in-1 out cbl 4.0 sqmm r , fttbtype-2 1in-1 out cbl 4.0 sqmm bk , fttb type-2 1in-2 out cbl 4.0 sqmm , fttbtype-2 1in-2 out cbl 4.0 sqmm , 2posi plugin bridge for ftb cbl 2.5 sqmm , 2posi plugin bridge for fttb cbl 2.5 sqmm , end plate for feed through tb type-1 , end plate for fttb1in-1 out cbl 4.0 mm , end plate for fttb1in-2 out cbl 4.0 mm , end plate for fttb diode1in-1 out cbl , end plate for fttb 1in-1 out cbl 2.5 m , screwless end stop for fuse and feed tb , terminal marker for fuse tb 1-12 , terminal marker for fttb 1-14 , fttb with diode 1in-1 out cbl upto 2.5 , end cap for din rail 35 x 7.5 mm , terminal strip marker carrier

Central Government/Public Sector

CTN :45019336

07 May, 2026 NA

Multi City - Kerala

Tender For auction sale of others - pl no. 98011110, condemned and u/s class iii steel girder 6 span with all fittings thereon over old downline bridge, bridge no 1090 along with guard rails 52kg in corroded condition 256.16 metres-13.292 mt fitted on the girders, foot path chequred plate 6mm thick 4 nos, tie angles, type i channel sleeper 177 nos, type ii channel sleeper 20 nos, trolley refugee- 1 no, man refugee 1 no, inspection ladders 8 nos, connecting flats, base of ohe mast- 3 nos, hook bolts and nuts, guard rail bolts, fish plate 52 kg- 38 nos, attached bolts and nuts. quantity 1 by lot. approximate calculated weight 196.958 mt. ds-8 no. 994210 dt 25-9-2023. custodian os/st/cn/can. location km 737/700-900 between thalassery and etakkot stations.

Wooden Bridge Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors