Latest wooden gate Tenders | Government wooden gate Tenders

CTN :45338776

29 May, 2026 NA

Malda - West Bengal

Tender For supply & installation of 04 seater cubicle work station table size:750w x 600d x 750/1050ht. (in mm), 45 mm thick panel 1050ht.750 x1050 & 600 x1050,45 mm thick panel 1050ht.p/f of panel based modular workstations of 45 mm thickness with extruded aluminum end post of size 45x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. top trim is of aluminum section of size 45x12mm and snap fitted on its base of size 45x20mm. the aluminum frame work is supported on lower and upper partition block. bottom block is made up of 9mm prelaminated particle board of desired shade which is pasted on 33x25mm thick particle board baton frame, which is properly screwed to end post and bottom electrical race way. upper block is fixed above the table top and is made up of particle battens fixed with 9 mm thick pin board and cloth of desired shade, optionally white board or glazing can be provided instead of pin board. raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. the raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. the modular switch & socket plates can be mounted & punched onto the raceway panels with easy cable connectivity & accessibility in case of any repairs etc. table tops to be made up of 25mm thick pre laminated particle board. the tops are supported on partition with the help of cantilevers. all work tops fixed at the standard anthropometric working height of 750mm from the ground level & finished with well filleted edges, thus making those users friendly. a circular hole is provided on every w/top to facilitate the easy connection of cpu & monitor wires & is covered with a modular wire manager made in abs. gable end is made up of 18mm pre-laminated particle board of desired shade and screwed to top with help of brackets. used to support w/tops at the exposed ends giving an openness to all workstations, cubicles etc. the keyboard trays are made out of 18mm thk plpb & mounted under the worktop with sliding channels [ warranty period: 30 months after the date of delivery ] ]

CTN :45339077

02 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For supply and installation of interior panelling, partition frame and frp modular toilet for middle basic unit (ndtc/ec-01, mc-02 & tc-01) of vande bharat chair car rake as per specification icf/md/spec-385, rev-00 with amendment no.1 to 5 & annexure-i including pasting of 3m brand film or equivalent of 80 microns thickness on the inner side of double sealed window glass and supply and installation of following items (1) exhaust duct assembly arrangement as per mcf design l. no.- rbl- md56211 dated - 08.05.25, (2) hinged glass door for fire extinguisher shall be as per icf cai no- b-2024/05 instead of fixed polycarbonate glass. (03) installation of acrylic cover sheet for emergency hammer arrgt., in trainset coaches as per icf cai no.- b-2024/06 (4) replacement of existing wash basin drain pipe with modified wash basin drain pipe as per icf cai no.- a-2025/06 . note -1 :for spare: following items for middle basic unit to be supplied in a separate box (1) toilet door - 1 nos. (2) toilet door latches/ handles- 2 nos. (3) toilet mirror - 2 nos. (4) toilet led light - 2 nos. (5) toilet tap - 2 nos. (6) toilet wash basin sink - 1 nos. (7) toilet dust bin door -1 nos. (8) toilet dust bin container - 1 nos. (9) window roller blind 16 nos. and (10) electrical cubicle doors - 1 set. . note -2: bom & drawings must be submitted at the earliest for approval after placement of po. so that timely approval for the same may becommunicated before prototype approval. note-3:annexure-improvements-vande bharat chair car coaches is applicable. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45199250

02 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For corrigendum : supply and installation of interior panelling, partition frame and frp modular toilet for middle basic unit (ndtc/ec-01, mc-02 & tc-01) of vande bharat chair car rake as per specification icf/md/spec-385, rev-00 with amendment no.1 to 5 & annexure-i including pasting of 3m brand film or equivalent of 80 microns thickness on the inner side of double sealed window glass and supply and installation of following items (1) exhaust duct assembly arrangement as per mcf design l. no.- rbl- md56211 dated - 08.05.25, (2) hinged glass door for fire extinguisher shall be as per icf cai no- b-2024/05 instead of fixed polycarbonate glass. (03) installation of acrylic cover sheet for emergency hammer arrgt., in trainset coaches as per icf cai no.- b-2024/06 (4) replacement of existing wash basin drain pipe with modified wash basin drain pipe as per icf cai no.- a-2025/06 . note -1 for spare: following items for middle basic unit to be supplied in a separate box (1) toilet door - 1 nos. (2) toilet door latches/ handles- 2 nos. (3) toilet mirror - 2 nos. (4) toilet led light - 2 nos. (5) toilet tap - 2 nos. (6) toilet wash basin sink - 1 nos. (7) toilet dust bin door -1 nos. (8) toilet dust bin container - 1 nos. (9) window roller blind 16 nos. and (10) electrical cubicle doors - 1 set. . note -2 bom & drawings must be submitted at the earliest for approval after placement of po. so that timely approval for the same may be communicated before prototype approval. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45296581

01 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of 52519294 hinge esd , 52519261 - hinge partition & ceiling end , 52519269 - hinge cubicle door

CTN :45284241

28 May, 2026 NA

Malda - West Bengal

Tender For supply & installation of 04 seater cubicle work station table size:750w x 600d x 750/1050ht. (in mm), 45 mm thick panel 1050ht.750 x1050 & 600 x1050,45 mm thick panel 1050ht.p/f of panel based modular workstations of 45 mm thickness with extruded aluminum end post of size 45x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. top trim is of aluminum section of size 45x12mm and snap fitted on its base of size 45x20mm. the aluminum frame work is supported on lower and upper partition block. bottom block is made up of 9mm prelaminated particle board of desired shade which is pasted on 33x25mm thick particle board baton frame, which is properly screwed to end post and bottom electrical race way. upper block is fixed above the table top and is made up of particle battens fixed with 9 mm thick pin board and cloth of desired shade, optionally white board or glazing can be provided instead of pin board. raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. the raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. the modular switch & socket plates can be mounted & punched onto the raceway panels with easy cable connectivity & accessibility in case of any repairs etc. table tops to be made up of 25mm thick pre laminated particle board. the tops are supported on partition with the help of cantilevers. all work tops fixed at the standard anthropometric working height of 750mm from the ground level & finished with well filleted edges, thus making those users friendly. a circular hole is provided on every w/top to facilitate the easy connection of cpu & monitor wires & is covered with a modular wire manager made in abs. gable end is made up of 18mm pre-laminated particle board of desired shade and screwed to top with help of brackets. used to support w/tops at the exposed ends giving an openness to all workstations, cubicles etc. the keyboard trays are made out of 18mm thk plpb & mounted under the worktop with sliding channels [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45164499

12 Jun, 2026 14.00 Lacs

Kashipur - Uttarakhand

Tender For corrigendum : ca no.cwe bly/ ge (e) /56 of 2026-27special repair to road from b charge transformer to b charge paddock no 1 wooden gate at rts and depot hempur under ge (east) bareilly

State Government

CTN :45278760

30 May, 2026 5.00 Lacs

Jaipur - Rajasthan

Tender For लकड़ी संबधित कार्य - wood work - wooden gate half repair , wooden gate fitting labor , fiber per foot , square foot of wood cal , wooden square feet , molding chief lumber per foot , fevicol per kg , feviquick per gram , sanmaica sq.ft , curtain pipe stands hanging wall to wall , wooden window in running foot , wooden gate running foot (10 mm , (in sanmaika board)

State Government

CTN :45230009

29 May, 2026 9.50 Lacs

Jaipur - Rajasthan

Tender For supply of wooden, aluminium and miscellaneous repair materials - aluminium potation with frame 1.5 inch pipe , aluminium potation with frame 2.5 inch pipe per square feet , aluminium potation with 5 mm glass 1.5 inch pipe per square feet , aluminium potation with 5mm glass 2.5 inch pipe per square feet , aluminium window two tracks per square feet , aluminum window tracts per square feet , aluminium vertical gate with door frame , aluminium handle section door door , potation ground machine (large) , rajkaj ref no.. 22264989 , potting clip , inter lock , holedraft 12 inch , chitkani 8 inches , capture 5 itch , fivet , toddy 12 inches , transparent couch 4 m. m. , transparent glass 8 mm. , transparent couch 12 m. m. , 4 mm glass mirror , karachi glass 4 m. m. , reflective glass 4 mm. , mosquito net s. s. , aluminium grill 1 inch , aluminum grill 1.5 inch , aluminium grill 2 inch , silicone tube 300g , wooden gate half repair , wooden gate fitting labor , fiber , wood cal , wood marndi square feet , molding chief lumber per foot , fevicol , feviquick per gram , feviquick per gram , sanmaica , curtain pipe stands hanging wall to wall , wooden window in running foot , wooden gate in running foot (in 10 mm sunmica board) , tractor trolley with driver , tractor water tanker capacity 4000 liters water , cement concrete mixer 5-7 cubic foot , niddle/plate vibrator with operator , grinding machine with operator (large, motorized) , compressor , welding machine , hydraulic excavator/jcb (bucket capacity 0.4 cum) , mobil oil , bitumen shalitax board (25 mm thick) , rajkaj ref no.: , plain sheet , 22264989 , gi sheet 22 gauge (0.80 mm) , gi sheet 24 gauge (0.63 mm) , gi sheet 1 mm thick , gi sheet 22 gauge (0.80 m.m.) , corrugated sheet , corrugated sheet , asbestos cement sheet 6mm (2.5/2.75x1m) and , pvc sheet 1 mm thick (coloured/plain) and , green yellow literoof expo sheet (183x90) and , fiber sheet 22 gauge (0.80 mm) and , ms sheet 24 gauge (0.63 mm) and , gi pipe 15 mm diameter (b class) and , gi pipe 20 mm diameter (b class) rm , gi pipe 25 mm diameter (b class) rm , charcoal , pvc water tank with cover ((as per is: 12701-1989) k , gi wire (medium grade) k , gi wire 15.00 mm diameter rm , gi wire 40.00 mm diameter rm , copper wire 8 swg (4.00 mm diameter) (0.117 kg/m) k , ppc cement , white cement , gravel - local , stone dust (in masonry) , brick (22.5 x 11 x 7.50 cm) first class , brick (22.5 x 11 x 7.50 cm) ii class and , sandstone up to 25 mm thickness and , floor slabs up to 35mm thick and , kota stone and , polished kota stone (one side polished) and , marble stone 20mm g g d d no no but , marble chips , marble powder , single pattan size 100 x 75 mm. stone frame rm , double patan size 125 x 75 mm. stone frame and , precast tiles / blocks , glazed size-30x45 cm and , mosaic size-40mm thick , vitrified size-60x60 cm , cement interlocking block m-30grade, 60mm thick , cement interlocking block m-30grade, 80mm thick , cement interlocking block m-30grade, 100mm thick , factory made doors (30 mm thick, solid core single pane) , konia iron/chokour bar/patti/angle iron , barbed iron wire (size 12 gauge wire and 12 gauge , strand/12 gauge wire and 14 gauge strand 14 re , iron mesh (24 gauge, 14 mesh) 22264989 , cement concrete mesh sky underworld 40mm thick , inamil paint , distepar (water bound) , lime - for whitewashing (aras / bud) , putty , primer (for iron/wood) , skilled labor , artisan-helper/electrician/plumber/carpenter/beldar/painter

CTN :44948111

26 May, 2026 NA

Bareli - Madhya Pradesh

Tender For corrigendum : supply and installation of interior panelling, partition frame and frp modular toilet for middle basic unit (ndtc/ec-01, mc-02 & tc-01) of vande bharat chair car rake as per specification icf/md/spec-385, rev-00 with amendment no.1 to 5 & annexure-i including pasting of 3m brand film or equivalent of 80 microns thickness on the inner side of double sealed window glass and supply and installation of following items (1) exhaust duct assembly arrangement as per mcf design l. no.- rbl- md56211 dated - 08.05.25, (2) hinged glass door for fire extinguisher shall be as per icf cai no- b-2024/05 instead of fixed polycarbonate glass. (03) installation of acrylic cover sheet for emergency hammer arrgt., in trainset coaches as per icf cai no.- b-2024/06 (4) replacement of existing wash basin drain pipe with modified wash basin drain pipe as per icf cai no.- a-2025/06 . note -1 for spare: following items for middle basic unit to be supplied in a separate box (1) toilet door - 1 nos. (2) toilet door latches/ handles- 2 nos. (3) toilet mirror - 2 nos. (4) toilet led light - 2 nos. (5) toilet tap - 2 nos. (6) toilet wash basin sink - 1 nos. (7) toilet dust bin door -1 nos. (8) toilet dust bin container - 1 nos. (9) window roller blind 16 nos. and (10) electrical cubicle doors - 1 set. . note -2 bom & drawings must be submitted at the earliest for approval after placement of po. so that timely approval for the same may be communicated before prototype approval. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45140200

03 Jun, 2026 NA

Koraput - Odisha

Tender For supply of cubicle workstations-two seater (with side partition) , cubicle workstations-one seater (with side partition) , highback chair , midback chair , visitor chair

Wooden Gate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector