Latest wooden pipe Tenders | Government wooden pipe Tenders

CTN :45057581

27 May, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

State Government

CTN :45258721

09 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For work of replacement/repair of eroded ms plates, bracing pipe, ms angles, channels, beams of aph outlet flue gas duct in unit-8, cstps during aoh.

Central Government/Public Sector

CTN :45241406

25 May, 2026 NA

Kalka - Haryana

Tender For supply of wooden pipe clamp assembly for clamping of 25 mm bore pipes as per drg no. cc36833.required for ksr ng coaches [ warranty period: 18 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45241482

25 May, 2026 NA

Kalka - Haryana

Tender For supply of wooden pipe clamp assembly for clamping of 20mm bore pipe as per drg no-cc36653 alt 'a'.required for ksr coaches. [ warranty period: 18 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45203133

21 May, 2026 13.22 Lacs

Visakhapatnam - Andhra Pradesh

Tender For repair of bag house equipment in crmp- 1) cage repair( bending minor welding & painting), 2) cleaning and fixing of bags( opening the chamber, removing the venturies, taking out bags cleaning with and refixing) once in year, 3) cleaning of dust collecting hopper of bag house, 4) repair of dust hopper and its doors, 5) bag house screw conveyor body repair, 6) bag house screw conveyor hanger bearing with shaft changing, 7) bag house screw conveyor end bearing changing, 8) bag house screw conveyor coupling repairs, 9) bag house screw conveyor changing, 10) en masse conveyor drive sprocket changing, 11) en masse conveyor tail sprocket changing., 12) en masse conveyor drive chain fixing, 13) en masse conveyor links changing, 14) en masse conveyor drive unit coupling repair, 15) en masse conveyor drive chain rejointing in snap, 16) maintenance of rotary air locks (twice in a year), 17) bucket elevator belt rejointing in case of snap, 18) bucket elevator drive pulley changing, 19) bucket elevator boot pulley changing, 20) bucket elevator fallen buckets fixin, 21) pulse jet solenoid valves repair and maintenance, 22) drier maintenance in compressor house (4 driers), 23) maintenance of compressed air pipe line, 24) id fan casing removal and fixing back to faciltate for fan changing, 25) id fan casing cutting and fixing back during bearing changing, 26) id fan casing changing, 27) id fan casing repair work, 28) id fan suction duct patch work, 29) id fan delivery duct patch work, 30) to make arrangement for chimney cleaning on id fan delivery duct near chimney and duct opening and closing there.., 31) dust hopper gate replacement, 32) dust hopper vibrofeeder replacement, 33) dust hopper body repair patch work, 34) flexible hose to pulse jet replacement, 35) pulsing pipe changing, 36) pulsing pipe repair, 37) cyclone patch work, 38) flue gas duct leaks arresting patch works.

State Government

CTN :45123691

29 May, 2026 NA

Daman - Gujarat

Tender For iec materials for the celebration of international day of yoga-2026 celebration in daman district under national ayush mission dnh dd - hire charges for providing and fixing stage of various height stage required in proper level and line as directed., for yoga instructor - size - 8x8-07 nos. (height - 2 or 3 ft), display set-up of led screen -size- 8x12-12 nos. at different location for 1 day before rehearsal (every 150 m), display set-up of led screen -size- 30x12-01nos. at main stage, stage with red carpet - 30x16, rustom (tower) for stage and delay led, providing and placing in position approved quality red carpet in front of stage with cleaning it up to function etc .complete as directed. ( approx quantity - 10000 sqft), hire charges for supplying, fixing and arranging good quality of decorative vvip glass / wooden tipoy complete as directed., providing and placing in position vvip sofa on stage with good quality upholstery s directed. (two seater) with cloth fabric, cushioned wooden premium quality chairs for seating of invitees ( vvip), providing and fixing of white curtain cloth wall with wooden/ ms framing 8 to 10 ft height made of fancy cloth etc. complete as directed. (approx 190 ft), foldable wooden table with frill, decorative flag of satin silk of different colors from minimum ms/ wooden pipe 4 to 12 ft pipe incl. fixing with cost of labor and materials at alternative poles, lamp made up of brass of appropriate height as instructed with accessories like ghee, cotton , camphor, candle, matchstick etc. with glass cover box, providing and fixing solvent printed flex design as per instruction including making framing with m.s. square pipe/ wooden framing as required and directed including cost of all materials and labors. (flex materials uses 260 gsm black back), box pillars- 3x3x10 ft height -40 nos., box gates - 30 x 3 ft and 12x3 ft height -2 nos., cut outs made in pvc hardboards with m.s. frame of different yoga poses. ( approx size 6x3 ft-20 nos., flower decoration: using good quality exotic natural flowers on stage, podium, backdrop and vip lounge. upto any size and ht of stage and backdrop. ( approx 150 ft), white khadi handkerchief napkin good quality, himalaya or equivalent glass mineral water bottle 250 ml., bisleri or equivalent mineral water 500 ml., providing glass for drinking water made up for vvip on stage, vanity van with washroom, hire charges for providing for temporary plug point with 5/15amp plug switch combined, erected in wooden board complete., hire charges for providing & dismantling pipe type earthling for temporary electrical installation having g.i. pipe, erected in earth pit with necessary salt & charcoal & necessary earth wire, hire charges for providing erecting as per direction of engineer in charge dismantling after use of good running condition for temporary power supply the xlpe insulated armored cable aluminum conductor of following size., (a) 4 core 4 / 6 / 10 sq.mm, (b) 4 core 16 / 25 sq.mm, (c) 3 1/2 core 50 / 70 sq.mm, hire charges for440v a.c generating set following capacity with necessary fuel, mains, switchgears & accessories complete running on load / no load with acoustic sound proof enclosure etc as per requirement. with transportation charges up to 30 kms.[a] 125 kva, hire charges for providing, erecting, operating and dismantling podium mike., hire charges for providing, erecting, operating and dismantling cordless mike, hire charges for providing, erecting, operating and dismantling ear mike., delay sound setup, 2 tower speaker of 15 inch, sound for main stage, flying sound, 04 subs 08 top, delay 08 setup, 03 top hdl 20, 24 top for 1 day before rehearsal, hire charges for providing, erecting, operating and dismantling sound mixer ., videographer 3, photographer 3, live drone- 1, live output on screen only, video mixer, video wireless, same day highlight, stage bottom- 12x1.5ft-2 qty, selfie zone at near main entry with eco-vinyl with 5mm foam sheet latt

CTN :44979846

14 May, 2026 NA

Liluah - West Bengal

Tender For supply of suspension bracket (long) for wooden pipe clamp of air brake system (for lhb coaches) as per sk. no. llh-05/2022, item no. 1, material : aisi304 [ warranty period: 30 months after the date of delivery ]

CTN :44757118

27 Apr, 2026 9.00 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : fabrication work d d - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of sulfur f

Central Government/Public Sector

CTN :44747896

16 Apr, 2026 NA

Hisar - Haryana

Tender For supply of set of wooden pipe clamp for double ferrule fitting for lhb coaches as per annexure-x,dated 24/05/2024. packing instruction: pi042 ver. 1.0 [ warranty period: 30 months after the date ofdelivery ]

Wooden Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector